Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 4%

Raymarine

E70340

Bronzas starpcaurēja sonda ar konisku HIGH CHIRP kūli 12° CPT-S, 10 m kabelis

La sonde bronze traversante RAYMARINE E70340 CPT-S offre une détection sous-marine précise grâce à son faisceau conique HIGH CHIRP de 12°. Conçue pour une durabilité accrue en milieu marin, elle est idéale pour les MFD Raymarine compatibles nécessitant un sonar traditionnel performant. La sonde est fournie avec un câble de 10m intégré.

Angle: 12 degrees

0 degree 12 degrees 20 degrees

Public priceGet pro pricing

308,58€

308,58€ ~~324,00€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Noliktavā

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Atbalstītās zondes tehnoloģijas	CHIRP Haute Fréquence
Sonāra frekvences	170-230
Darbības temperatūra	-10 à +50
Maksimālais dziļuma rādījums	274.0
Transduktora materiāls	Bronze
Sonāra savienotāja tips	Raymarine CPT-S
Cauru garums	10.0
Saderināmi displeji	Raymarine Axiom, Element, Dragonfly (avec adaptateur si nécessaire)
Produkta dziļums	100
IP indekss	IPX6/IPX7
Bezvadu savienojamība	Non
Montāžas tips	Traversante
Sertifikāti	2013/53/EU,EN ISO 8846:2017
Kūļa pārklājuma leņķis	25
CHIRP augstfrekvence	170-230
Iebūvēts ātruma sensors	Non
Izdošanas gads	2017.0
Garantija	2.0

Detailed description

RAYMARINE E70340 starpcaurēja bronzas sonda ir zemūdens detektora risinājums, kas paredzēts CHIRP sonaru sistēmām. Šis CPT-S modelis ir starpcaurēja sonda no bronzas ar konisku HIGH CHIRP kūli, kas nodrošina 12° leņķi, lai kompensētu korpusa V formu. Tā tiek piegādāta ar 10 metru integrētu kabeli, kas atvieglo uzstādīšanu dažādos kuģos.

Precīza CHIRP sonāra tehnoloģija

Integrēta RAYMARINE CPT-S sērijā, šī sonda izmanto HIGH CHIRP tehnoloģiju, lai nodrošinātu detalizētus sonāra atgriežņus un uzlabotu mērķu atdalīšanu. Atšķirībā no DownVision sistēmām, kas piedāvā foto-reālistisku dibena attēlojumu, šis modelis koncentrējas uz tradicionālu konisku kūli, kas optimizēts zivju detektēšanai un precīzai jūras dibena sekošanai dažādos dziļumos. Tā bronzas konstrukcija padara to izturīgāku par plastmasas versijām (piemēram, A80447 ar tādu pašu 12° leņķi), īpaši piemērotu sarežģītiem jūras apstākļiem un korpusiem no koka vai stikla šķiedras.

Uzstādīšana un atbilstība

E70340 sonda paredzēta starpcaurēja uzstādīšanai, kas prasa korpusa caururbšanu. 12° leņķis ir speciāli izvēlēts korpusiem ar mērenu deadrise, nodrošinot, ka sonāra kūlis tiek vērsts vertikāli uz dibenu. Nepieciešams nešķērdēt sondas kabeli, jo tas novedotu pie sonāra veiktspējas būtiskas degradācijas, anulētu garantiju un anulētu Eiropas CE markējumu. Šis izstrādājums atbilst harmonizētajām normām 2013/53/EU un EN ISO 8846:2017, garantējot tā uzticamību un drošību jūras izmantošanai. Lai nodrošinātu optimālu veiktspēju, sonda jāizmanto tikai ūdenī, lai izvairītos no pārkaršanas.

Documentation

Type	Nom
	EN - Plan technique - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	FR - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Expert review

Pol CONIN

Digital Manager

« Technical analysis of the Raymarine CPT-S bronze 12° CHIRP transducer »

The Raymarine CPT-S E70340 transducer is a sound technical choice for recreational sailors and anglers seeking a reliable and robust CHIRP sonar solution. Unlike RealVision 3D multi-element sensors that provide sophisticated imaging, this model focuses on the performance of a dedicated HIGH CHIRP conical beam. Its bronze construction is a major asset for durability, outperforming plastic versions in harsh marine environments, especially for boats kept afloat year-round or in saltwater. It is particularly well-suited to wooden or fiberglass hulls, where a through-hull installation is preferred to avoid turbulence.

The 12° beam angle of the transducer is specifically designed to compensate for the deadrise of hulls with moderate angles, ensuring the sonar beam is perpendicular to the seabed for optimal reading. It is essential to verify the compatibility of this angle with your hull design before installation to avoid beam tilt that would degrade performance. Although the CPT-S series is a previous generation compared to the newer RealVision systems, it remains relevant for Raymarine MFDs (such as Dragonfly models or certain A, eS, gS series) requiring a traditional CHIRP sonar for precise fish detection and bathymetry.

The through-hull installation, while more complex than a transom-mount setup, offers superior hydrodynamic performance and better transducer protection. It requires careful attention to hull drilling and watertight sealing to maintain the vessel's integrity. This transducer does not provide DownVision or SideVision imaging; therefore, it should be prioritized if your primary need is a high-performance traditional CHIRP sonar without advanced imaging features, or if you are complementing an existing system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Bronzas starpcaurēja sonda ar konisku HIGH CHIRP kūli 12° CPT-S, 10 m kabelis

308,58€

308,58€ ~~324,00€~~

Complete your installation with

Complementary equipment

Raymarine

AIS 700 klase B ar iebūvētu VHF antenas sadalītāju

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Frequently asked questions

Need help? Contact us

What is HIGH CHIRP technology and what is the purpose of the cone beam of this depth sounder?

The HIGH CHIRP technology used by this Raymarine CPT-S depth sounder provides highly detailed sonar returns and improved target separation underwater. Unlike DownVision imaging systems, the traditional cone beam of this depth sounder is optimized for precise fish detection and seabed tracking at various depths.

Why does this through-hull transducer have a 12° angle?

The 12° angle of this transducer is specifically designed to compensate for the deadrise of your vessel's hull. This ensures the sonar beam is directed vertically toward the seabed, guaranteeing optimal performance and accurate readings, particularly for hulls with moderate deadrise.

What type of installation is required for this Raymarine transducer?

This transducer is a through-hull model, which means it requires drilling the hull of your boat for installation. Raymarine recommends installation by a certified installer to ensure proper implementation and to maintain the benefits of the enhanced warranty.

Can I cut the depth sounder cable if its 10-meter length is excessive for my sailboat?

No, the depth sounder cable must never be cut. Cutting the cable will significantly degrade the fishfinder's performance, void the product warranty, and invalidate the European CE mark. If the cable is cut, it cannot be repaired and must be replaced.

Which Raymarine devices is this CPT-S transducer compatible with?

This CPT-S transducer is designed to be compatible with Raymarine CHIRP sonar systems. It generally works with Raymarine multifunction displays (MFD) from the Axiom and Element series, as well as with certain Dragonfly models that support CPT-S conical-beam transducers.

Why is this transducer made of bronze rather than plastic?

This transducer is made of bronze to provide enhanced durability, particularly suited to demanding marine environments. Bronze is a more robust option than plastic and is recommended for fiberglass or wooden hulls, ensuring better longevity and resistance to the elements.

How should I maintain and clean my depth sounder to ensure its performance?

To maintain your depth sounder’s performance, follow these recommendations:

Apply a thin coat of water-based antifouling paint to the depth sounder to prevent marine growth buildup. Reapply every 6 months or at the start of each season.

Clean the depth sounder with a soft cloth and mild household detergent.

For stubborn grime, use a scrubbing pad such as Scotch Brite™, taking care not to scratch the face of the depth sounder.

Warning: Never use ketone-based paint, spray paint, or harsh cleaning solvents like acetone, as they will damage the depth sounder.

Which compliance standards does this Raymarine transducer meet?

This Raymarine E70340 transducer complies with European harmonized standards. It meets Directive 2013/53/EU for marine equipment and EN ISO 8846:2017, ensuring reliability and safety for marine use.