Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 9%

Raymarine

A06045

Kabelis SeaTalk NG / Devicenet NMEA2000 sievišķā (400mm)

The Raymarine A06045 cable is a 400 mm adapter designed to integrate NMEA2000 devices (DeviceNet female connector) into a SeaTalkng network. Essential for inter-system connectivity, it allows you to extend your Raymarine network with NMEA2000-compatible sensors or displays. Part of the SeaTalkng cabling range, it ensures seamless interoperability. This product includes only the A06045 adapter cable.

Public priceGet pro pricing

48,96€

48,96€ ~~54,00€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Noliktavā

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Konektora tips	SeaTalkng mâle vers DeviceNet NMEA2000 femelle
Kabeļa tips	Câble adaptateur
Cauru garums	0.4
Saderīgā tīkla sistēma	SeaTalkng, NMEA2000
Vadu tīkls	SeaTalkng,NMEA2000
Strāvas spriegums darbībai	12 V DC
Darbības temperatūra	-20°C à +60°C
Uzglabāšanas temperatūra	-25°C à +70°C
Sertifikāti	CE,NMEA 2000
Produkta tips	Câble adaptateur
Saderīgie modeļi	Appareils Raymarine SeaTalkng et appareils tiers NMEA2000

Detailed description

Raymarine A06045 kabelis ir būtiska savienojuma risinājums jūras navigācijas sistēmām, nodrošinot komunikāciju starp SeaTalkng tīklu un NMEA2000 savietojamiem ierīču. Šis 400 mm garais adaptācijas kabelis ir specifiski konstruēts tuvā savienošanai, ar DeviceNet NMEA2000 sievišķo savienotāju vienā galā un standarta SeaTalkng savienotāju otrā galā.

Tīkla integrācija un savietojamība

Šis adaptācijas kabelis ļauj savienot trešo pušu NMEA2000 ierīces ar Raymarine SeaTalkng kopnes sistēmu. Atšķirībā no klasiskajiem SeaTalkng atzarojuma kabeliem vai galvenās kopnes (backbone) kabeliem, kas savieno Raymarine iekārtas, A06045 ir paredzēts tīkla paplašināšanai līdz NMEA2000 standarta perifērijas ierīcēm. Tas atbilst Raymarine stratēģijai nodrošināt paplašinātu savienojamību, līdzīgi kā integrētie tiltiņi (bridges) dažos ST70 instrumentos vecākajiem SeaTalk(1) sistēmām.

Tehniskās un instalācijas specifikas

SeaTalkng sistēma darbojas pēc kopnes arhitektūras principa ar galveno kabeli (backbone) un atzarojuma kabeliem (spurs) individuāliem produktiem. A06045 kabelis darbojas kā atzarojuma adaptācijas kabelis, pieslēdzoties SeaTalkng T-skaņotājam vai savienojuma bloka. Tā konstrukcija ar maza diametrā savienotājiem un krāsu kodējumu (zils galvenajam kabelim, balts atzarojumiem, sarkana lente barošanas nodrošināšanai) ir paredzēta, lai vienkāršotu instalāciju un samazinātu savienojuma kļūdu risku. Šāda kabeļa izmantošana ir kritiski svarīga jauktām konfigurācijām, kur nepieciešama NMEA2000 integrācijas elastība, papildinot Raymarine piedāvāto SeaTalkng kabeļu klāstu ar dažādiem garumiem.

Documentation

Type	Nom
	EN - Manuel d'utilisation - Câble SeaTalk NG / Devicenet NMEA2000 femelle (400mm)

Expert review

Pol CONIN

Digitālās attīstības atbildīgais

« Essential NMEA2000 connectivity for SeaTalkng network »

The A06045 cable is a critical component for integrators and users seeking to maximize the flexibility of their navigation network. Its primary value lies in its ability to bridge Raymarine's proprietary SeaTalkng ecosystem with the open NMEA2000 (DeviceNet) architecture. For a cruising sailboat or a powerboat equipped with a SeaTalkng network, this cable becomes essential if you wish to add a specific sensor, a multifunction display, or any other device from a different brand that is NMEA2000-compatible.

In terms of installation, its 400 mm length is designed for short connections, typically between a SeaTalkng T-piece and a nearby NMEA2000 device. It is crucial to plan the placement of equipment so that this length is sufficient, or to use standard NMEA2000 extension cables if necessary. The advantage is a clean and direct installation for adjacent devices. This cable differs from standard "spur" SeaTalkng cables, which are dedicated to native Raymarine devices, by providing a direct gateway to the NMEA2000 standard without requiring an external protocol converter for raw data.

It is important to note that this cable ensures physical connectivity and the transport of NMEA2000 messages on the SeaTalkng bus; the compatibility of specific messages between connected devices will depend on the capabilities of each piece of equipment. It is not a data converter, but a physical adapter. Therefore, it is ideal for systems where a simple and direct physical integration of an NMEA2000 component into an existing SeaTalkng network is desired, without added complexity.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Kabelis SeaTalk NG / Devicenet NMEA2000 sievišķā (400mm)

48,96€

48,96€ ~~54,00€~~

Frequently asked questions

Need help? Contact us

What is the Raymarine A06045 cable and what is it used for?

The Raymarine A06045 cable is an adapter designed to connect third-party NMEA 2000-compatible devices to Raymarine's proprietary SeaTalkng network. It enables communication between these two marine data bus standards.

What is the length of this A06045 adapter cable?

This Raymarine A06045 adapter cable is 400 mm long.

What types of connectors are on cable A06045?

Cable A06045 is fitted with a standard SeaTalkng connector at one end and a female DeviceNet NMEA2000 connector at the other.

Is the A06045 cable a SeaTalkng spur cable or a backbone cable?

The A06045 cable is a SeaTalkng spur adapter cable. It is designed to connect to a SeaTalkng T-piece or junction block, allowing an NMEA 2000 device to be linked to the main SeaTalkng backbone.

Is this A06045 cable compatible with NMEA2000 equipment from other manufacturers?

Yes, this cable is designed to connect third-party NMEA2000 devices to Raymarine's proprietary SeaTalkng bus. It uses the standard female DeviceNet NMEA2000 connector, ensuring compatibility with NMEA2000-compliant devices.

Can I use this cable to connect SeaTalk(1) products to my SeaTalkng network?

No, this A06045 cable is specifically designed to connect NMEA 2000 devices to a SeaTalkng network. To connect SeaTalk(1) products to a SeaTalkng network, you need specific SeaTalk(1) adapter cables and Raymarine products with a bridge function (such as certain ST70 instruments).

How to install A06045 cable in a SeaTalkng system?

The A06045 cable is a drop cable. To install it, you must connect it to a T-piece (T-connector) or a SeaTalkng junction block that is part of the main backbone of your SeaTalkng network. The other end of the cable will connect to your NMEA2000-compatible device.

Is it necessary to use terminators with this A06045 adapter cable?

The A06045 cable itself is not a terminator. However, it is essential that the main backbone of your SeaTalkng system is properly terminated. Two terminators must be installed, one at each end of the main cable, to ensure correct data transmission. This cable connects to the already terminated backbone.