Raymarine Câble d'adaptation (8 vers 25) sonde CP370 sur Axiom RV

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 14%

Raymarine

A80489

Pievada kabelis (8 uz 25) zondes CP370 uz Axiom RV

Official Raymarine A80489 adapter cable to connect an 8-pin transducer, compatible with the CP370 sounder module, to an Axiom RV multifunction display equipped with a 25-pin port. This is the essential solution to modernize your electronics while retaining your existing transducer.

Includes: Only the adapter cable.

Public priceGet pro pricing

66,89€

66,89€ ~~78,00€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Noliktavā

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Konektora tips	Raymarine 8-pin to 25-pin
Kabeļa tips	Depth sounder adapter cable
Cauru garums	0.5
Saderīgā tīkla sistēma	Raymarine proprietary sonar
Darbības temperatūra	-25 to +55
Uzglabāšanas temperatūra	-30 to +70
Adaptatora virziens	8-pin Sonde (CP370) to MFD 25-pin (Axiom RV)
Kabeļa pielietojums	CP370 transducer adaptation to Axiom RV display
Sertifikāti	CE
Krāsa	Black
Vadu skaits	8.0
Vadītāja materiāls	Tinned copper
A savienotāja tips	Raymarine 8-pin (Transducer)
B savienotāja tips	Raymarine 25-pin (Axiom RV)
Konektora bloķēšanas mehānisms	Threaded ring
Strāvas tips	DC
Elastība	Flexible
Instalācijas atrašanās vieta	Behind the console / dashboard
Apvalka materiāls	PVC
Maksimālais spriegums	30.0
Minimālais lieces rādiuss	50
Tipisks elektriskais patēriņš	N/A
Priekšformēti savienotāji	Yes, 1x 8-pin, 1x 25-pin
Sektors (AWG)	24.0
Sektors (mm²)	0.2
Ekrāna aizsardzība	Shielded
Ekrāna aizsardzības tips	Braided and tinned strands
Signal Type Adapted	Traditional fishfinder / CHIRP (50/200 kHz)
Supported Sonar Frequencies	50 kHz, 200 kHz
UV izturība	Yes
Hermētiskuma indekss	IPX6
Svars	0.18
Vada apdare	Tinned
Wiring Standard	Raymarine proprietary

Detailed description

Raymarine A80489 pievada kabelis ir neatņemama sastāvdaļa laivu īpašniekiem, kas vēlas modernizēt savu navigācijas elektroniku. Tas ļauj pieslēgt esošu zondi, kas sākotnēji paredzēta Raymarine CP370 zondes moduļa izmantošanai, tieši pie Axiom RV daudzfunkcionālā ekrāna. Šis adaptors nodrošina gludu pāreju starp iekārtu paaudzēm, aizsargājot jūsu sākotnējo ieguldījumu kvalitatīvā zondē.

Saderība un pieslēgšana

Šis kabelis konvertē konkrēti 8 kontaktu zondes, kas saderīgas ar CP370 moduli, 25 kontaktu savienojumā, kāds nepieciešams Axiom RV MFD "RealVision 3D + 1kW" portiem. Izmantojot šo adapteri, jūs saglabājat savas tradicionālās zondes iespējas, vienlaikus izmantojot jaunā Axiom RV ekrāna interfeisu un progresīvās funkcijas. Tas ir plug-and-play risinājums, kas vienkāršo instalāciju un novērš nepieciešamību nomainīt jau esošu zondi — operāciju, kas bieži ir sarežģīta un dārga.

Pozicionēšana Raymarine sortimentā

Atšķirībā no Y veida adapteriem vai pagarinājuma kabeļiem, A80489 ir ļoti specifisks konvertācijas risinājums. Tas atšķiras no citiem kabeļiem, piemēram, A80488 (kas pielāgo CP370 zondi Axiom DV), ar savu 25 kontaktu savienojumu, kas paredzēts tikai Axiom RV modeļiem. Tas ir būtisks elements, lai nodrošinātu atpakaļsaderību Raymarine ekosistēmā, ļaujot pakāpeniski modernizēt jūsu navigācijas un zivju meklēšanas sistēmu.

Expert review

Payment and security

Your payment information and data are processed securely.

Pievada kabelis (8 uz 25) zondes CP370 uz Axiom RV

66,89€

66,89€ ~~78,00€~~

Complete your installation with

Complementary equipment

Raymarine

Montāžas komplekts aizmugurējai uzstādīšanai AXIOM 12" Ietver aizmugurējos stiprus un fiksācijas elementus

Ref : R70534

57,72€

57,72€ ~~60,00€~~

Raymarine

Adaptācijas plāksne AXIOM 12 izgriezumam C120/E120 Classic

Ref : A80529

105,91€

105,91€ ~~114,00€~~

Frequently asked questions

Need help? Contact us

What exactly is this A80489 adapter cable used for?

This A80489 adapter cable is used to connect an existing marine transducer with an 8-pin connector (originally designed for a Raymarine CP370 sounder module) to a Raymarine Axiom RV series multifunction display, which has a 25-pin transducer port.

I have a transducer that was connected to a CP370 module. Can I connect it to my new Axiom RV using this cable?

Yes, that is precisely the purpose of this adapter. It was designed to allow users to keep their CP370-compatible transducer (8-pin connector) when upgrading to an Axiom RV display (25-pin port), thus avoiding the need to replace the transducer.

Using this adapter, will I get RealVision 3D functions with my old transducer?

No. This adapter allows your traditional transducer to display standard 2D sounder data on your Axiom RV display. It cannot add features that the transducer does not inherently support. To access DownVision, SideVision, or RealVision 3D technologies, you must use a transducer specifically designed for these functions.

Is the installation of this cable complicated?

No, installation is very simple and 'plug-and-play'. Simply connect the cable from your transducer (8-pin connector) to the corresponding end of the adapter, then screw the other end (25-pin connector) into the 'RealVision 3D' port located at the rear of your Axiom RV display.

Do I need to perform any specific configuration on my Axiom RV after connecting the cable?

In general, the Axiom RV display automatically detects the type of connected transducer. However, it is recommended to check in the sounder settings that the correct transducer model is selected from the list to ensure optimal performance.

Will water temperature data be transmitted?

Yes, if your original transducer (CP370-compatible) is equipped with a temperature sensor, this adapter will transmit temperature data to your Axiom RV display without any issues.

Can I use this cable to connect a transducer from another brand than Raymarine?

This adapter is specifically designed for the Raymarine ecosystem. It is intended to connect Raymarine transducers (or Airmar-compatible transducers for Raymarine) with an 8-pin connector to Raymarine Axiom RV displays. Use with other brands is not guaranteed and could damage your equipment.

Is the connection watertight and secure?

Yes, both connectors are equipped with a threaded locking ring that ensures a solid and watertight connection, designed to withstand marine environments and vibrations.

What is the advantage of using this cable instead of replacing the transducer?

The main advantage is economic and practical. It allows you to keep your existing transducer, which is often expensive and complex to install (especially through-hull models), while benefiting from the performance and interface of a latest-generation multifunction display.

Will this adapter work with a CHIRP transducer?

This adapter will work with traditional transducers (non-CHIRP or single-function CHIRP) that were compatible with the CP370 module. It will transmit the transducer signal to the Axiom RV, which will be able to interpret it.

How to identify the transducer port on my Axiom RV?

On the rear of your Axiom RV screen, the transducer port is clearly labeled. It is the largest round connector, with 25 pins, often marked 'TRANSDUCER' or 'RealVision 3D'.

Is this cable necessary if I buy a new RealVision 3D transducer with my Axiom RV?

No. If you purchase a new Raymarine RealVision 3D transducer, it will come with the correct 25-pin connector for direct connection to your Axiom RV. This A80489 adapter cable is only required if you wish to reuse an older 8-pin transducer.