Type 0.5 Autopilot hydraulic pump for 12 volt systems

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 9%

Raymarine

E12139

Reversīva sūknis T0.5 - 12V

La pompe réversible T0.5 - 12V Raymarine (E12139) est l'option la plus compacte de la gamme de pompes hydrauliques Raymarine, idéale pour les systèmes de pilotage automatique et vérins de 50 à 110 cc. Conçue pour une intégration fiable avec les ordinateurs de cours SPX ou les unités ACU Evolution, elle bénéficie d'une protection IP67 pour les environnements moteur. Le produit inclut la pompe hydraulique, trois joints 1/4 in BSP en caoutchouc/métal, et trois adaptateurs 1/4 in BSP vers 1/4 in NPT (si nécessaires).

Public priceGet pro pricing

880,85€

880,85€ ~~978,00€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Noliktavā

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Maksimālais elektriskais patēriņš	108 W
Tipisks elektriskais patēriņš	108 W
Strāvas spriegums darbībai	12 V
Darbības temperatūra	-25°C à +55°C
Ieteicamais drošinātāja kalibrs	15 A
Produkta platums	103 mm
Produkta augstums	89 mm
Produkta dziļums	203 mm
IP indekss	IP67
Montāžas tips	Fixation boulonnée
Sertifikāti	CE, EN60945, IEC 60529 IP67
Displacement	50-110 cc
Dzinēja tipa nosaukums	Pompe hydraulique réversible
Montāžas aprīkojums iekļauts	Non
Montāžas orientācija	Toutes orientations, à condition que le moteur ne soit pas sous le corps de la pompe
Maksimālais spiediens	55 bar (800 psi)
Iebūvēts stūres leņķa sensors	Non
Atvienojams	Non

Detailed description

Izstrādāta Raymarine autopilota sistēmām, Raymarine reversīvā sūknis T0.5 - 12V (E12139) ir hidrauliskā vienība, kas paredzēta kuģiem ar esošo hidraulisko stūri vai mehānisko stūri ar sekundāro cilindru. Tā ir kompaktākā modelī no Raymarine hidraulisko sūkņu līnijas un piemērota cilindriem ar tilpumu 50 līdz 110 cm³ (3,1 līdz 6,7 kubikcollas).

Veiktspēja un integrācija

Šī 0.5 tipa sūknis nodrošina maksimālo caurplūdumu 600 cm³/min (36,6 kubikcollas/min) bez slodzes, ar maksimālo periodisko spiedienu 55 bāri (800 psi) pie 12 V. Tipiskā patēriņa strāva ir 9 A pie 12 V un 55 bāriem. 12 V līdzstrāvas dzinējs ir aizsargāts pēc IP67 standarta un var tikt noņemts bez hidrauliskās sistēmas hermētiskuma traucējumiem. Tajā iebūvēti vadāmi pretatgrūšanas vārsti, lai novērstu manuālās stūres atgrūšanu, un tā ir saderīga ar līdzsvarotiem vai līdzsvarotiem cilindriem, kā arī sistēmām ar spiediena tvertni.

Salīdzinājums un fiziskās specifikācijas

Sūknis T0.5 (E12139) atšķiras no augstāka līmeņa Raymarine modeļiem, piemēram, 1. tipa (M81120/M81119), 2. tipa (M81121/M81123) un 3. tipa (M81122/M81124), ar mazāku cilindra tilpumu un caurplūdumu, kas to padara piemērotu nelielām līdz vidēja izmēra iekārtām. Kamēr T0.5 nodrošina līdz 110 cm³, 1. tips sasniedz 230 cm³, 2. tips — 350 cm³, bet 3. tips — 500 cm³. Tā kompaktās izmēri (A: 58,4 mm, B: 203 mm) un 1/4 collas BSPP savienojumi atvieglo uzstādīšanu zem klāja, attālināti no siltuma un vibrāciju avotiem. Tā atbilst CE standartiem, ieskaitot EMV direktīvu 2004/108/EK un standartu EN60945:2002.

Documentation

Type	Nom
	EN - Notice d'installation - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v

Expert review

Pol CONIN

Digital Manager

« Technical analysis of the Raymarine T0.5 hydraulic pump for autopilot »

The Raymarine reversible T0.5 - 12V hydraulic pump (E12139) is a key component for autopilot systems on small to medium-sized vessels. Its specification for cylinders from 50 to 110 cc makes it Raymarine's entry-level solution for hydraulic steering, targeting sailboats or small motor yachts with cylinder volumes within this range. It is particularly suitable when installation space is limited, thanks to its compact dimensions.

Integrating this pump into an existing system requires careful attention to hydraulic circuit cleanliness to ensure the proper operation of the integrated check valves. Installation must be carried out below deck, away from excessive heat sources or vibrations, to ensure system longevity. Its 12V design and 9A consumption at 55 bar make it compatible with the standard electrical architectures of most recreational boaters, without excessively draining service batteries, unlike larger-capacity pumps such as the Type 2 or Type 3 models, which can draw 24A or 34A at 12V.

Although the manual recommends installation by a Raymarine-certified service representative, for an experienced marine electronics and hydraulics installer, this pump is straightforward to install, provided the electrical connection directives to an Evolution ACU or an SPX course computer are strictly followed. It is important to note that this pump is not suitable for high-capacity hydraulic cylinders, for which the T1, T2, or T3 models would be more appropriate.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Reversīva sūknis T0.5 - 12V

880,85€

880,85€ ~~978,00€~~

Complete your installation with

Complementary equipment

Raymarine

Daudzfunkcionālais displejs i70s

Ref : E70327

678,00€

678,00€ ~~714,00€~~

Raymarine

AIS 700 klase B ar iebūvētu VHF antenas sadalītāju

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Raymarine

Vēja displejs i60

Ref : E70061

560,23€

560,23€ ~~594,00€~~

Raymarine

Displejs i50 Depth — dziļuma mērītājs

Ref : E70059

514,55€

514,55€ ~~594,00€~~

Frequently asked questions

Need help? Contact us

For which type of steering system is this pump designed?

The Raymarine T0.5 reversible pump is primarily designed for vessels equipped with an existing hydraulic steering system. It can also be used on vessels with mechanical steering, provided it is paired with a secondary steering cylinder.

What is the maximum hydraulic cylinder capacity this pump can handle?

This T0.5 hydraulic pump is suitable for cylinders with a capacity between 50 and 110 cc (3.1 to 6.7 in³).

What are the key performance specs of the reversible pump T0.5 in terms of flow rate and pressure?

The reversible pump T0.5 delivers the following performance at 12 V:

Peak flow rate (no load): 600 cc/min (36.6 in³/min)Maximum intermittent pressure: 55 bar (800 psi)Typical current draw: 9 A at 55 bar

Where should I install the Raymarine T0.5 pump on my boat?

The T0.5 pump is designed for installation below deck only. For optimal performance and to prevent damage, it should be installed:

On a solid structure to minimize vibrations.Away from heat sources, excessive vibration, and fumes.Clear of confined areas containing flammable materials.Preferably above the waterline.Absolute cleanliness is essential during installation of hydraulic systems to prevent dirt particles from affecting the operation of the check valves.

Is this pump compatible with balanced or unbalanced hydraulic rams?

Yes, the reversible Raymarine T0.5 pump is compatible with both balanced and unbalanced hydraulic rams. It can also be used with pressurized reservoir systems.

Is the pump motor waterproof and can it be easily removed?

Yes, the pump motor is rated IP67, providing protection against temporary immersion in water. It can be removed from the pump without compromising the hydraulic system's watertight integrity or causing fluid leaks.

What are the hydraulic connections for the T0.5 pump?

All hydraulic ports on the Raymarine T0.5 reversible pump are 1/4 inch BSPP (parallel thread).

With which Raymarine autopilot systems is this pump compatible?

The Raymarine T0.5 reversible pump is designed to be integrated with Raymarine autopilot systems. It is compatible with the SPX course computer or the Evolution actuator control unit (ACU).