Kit mise à jour de l’unité de puissance ST4000 à MKII

Autopilot Mk II Wheel Drive and Installation Kit

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 6%

Raymarine

E12093

ST4000 jaudas bloka atjaunināšanas komplekts uz MKII

Conçu pour les propriétaires de pilotes automatiques ST4000, le kit Raymarine E12093 permet une mise à jour vers l'unité de roue motrice Mk II, offrant une compatibilité avec les systèmes de direction de 1 à 3.5 tours de butée à butée et les roues de 3 à 8 rayons. Ce kit intègre une unité de puissance moderne au système ST4000 existant. Le kit inclut l'unité de roue motrice, le support de piédestal, des inserts de serrage de rayon, des vis, des forets, une clé Allen, des rotules, un câble d'alimentation de 4.5m et, si fourni, un capteur d'angle de barre.

Public priceGet pro pricing

917,30€

917,30€ ~~978,00€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Noliktavā

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Montāžas tips	Fixation sur roue et sur piédestal
Materiāls	Plastique ABS et métal
Krāsa	Noir
Saderīgie modeļi	Pilotes automatiques Raymarine ST4000
Produkta izmēri	Diamètre global : 361 mm ; Diamètre couverture avant : 228 mm ; Hauteur : 135 mm ; Tube moteur : Ø 48 mm, longueur 171 mm (+ 60 mm dégagement câble)
Finišķis	Gris mat
Uzstādīšanas veids	Fixation sur roue et piédestal
Komplekta saturs	Unité de roue motrice, support de piédestal, 3 inserts de serrage de rayon 16 mm, 3 inserts de serrage de rayon 12 mm, 3 colliers de serrage de rayon, 6 vis de serrage M5 x 16 mm, 4 vis de support n° 10 x 3/4 in, forets (6 mm, 4 mm), clé Allen 3 mm, 2 rotules, goupille de barre, 3 vis à tête cylindrique n° 8 x 3/4 in, goujon, 2 écrous, 2 vis à tête fraisée n° 8 x 3/4 in, câble d'alimentation 4.5 m, clip de câble et vis, capteur de position de gouvernail (si fourni)
Produkta tips	Unité d'entraînement de roue pour pilote automatique

Detailed description

Raymarine E12093 atjaunināšanas komplekts paredzēts ST4000 autopilota sistēmu īpašniekiem, kuri vēlas modernizēt savu jaudas bloku. Šis komplekts aizvieto veco bloku ar Mk II riteņa piedziņas vienību, integrējot Raymarine Evolution autopilotu klases tehnoloģiju. Tas ir risinājums, lai pagarinātu esošo ST4000 sistēmu darbības laiku, uzlabojot stūres komandas vienības veiktspēju.

Saderība un Tehniskās Raksturlielumi

Riteņa piedziņas vienība, kas iekļauta šajā komplektā, ir saderīga ar 3, 4, 5, 6, 7 vai 8 stariem aprīkotām stūrēm. Tā ir paredzēta darbībai ar stūres sistēmām, kurām ir no 1 līdz 3,5 pagriezienu ierobežotāji. Vienības priekšējais pārklājuma diametrs ir 228 mm (9,0 collas), kopējais diametrs — 361 mm (14,2 collas). Augstums ir 135 mm (5,3 collas), motora caurule ir 48 mm (1,9 collas) diametrā un 171 mm (6,7 collas) garumā, nepieciešams papildu 60 mm (2,4 collas) brīva vieta kabeļa novietošanai. Šī vienība integrējas esošajā ST4000 autopilota kontrollerī, nodrošinot mērķtiecīgu modernizāciju, nevis pilnīgu sistēmas nomaiņu.

Instalācija un Komplekta Saturs

Riteņa piedziņas vienības instalācija ietver vienības nostiprināšanu pie stūres, izmantojot priekšējā pārklājumā iepriekš izurbētās stariem paredzētās atveres, un pieslēgšanu esošajai komandas vienībai. E12093 komplektā iekļauta pati piedziņas vienība, piestaļa atbalsts, trīs 16 mm un trīs 12 mm stariem paredzēti spiedņi, trīs stariem paredzēti spiedņu saites, sešas M5 x 16 mm stiprināšanas skrūves, četras n° 10 x ¾ collas atbalsta skrūves, 6 mm un 4 mm urbji, 3 mm Allen atslēga, divas locītavas, stūres tapas, trīs n° 8 x ¾ collas cilindriskas galvas skrūves, tapas, divas skrūves, divas n° 8 x ¾ collas iegriezto galvu skrūves, 4,5 m (15 pēdu) barošanas kabelis, kabeļa klips un n° 6 x ½ collas skrūve, kā arī stūres leņķa sensors, ja tas bija iekļauts sākotnēji. Atkarībā no konfigurācijas var būt nepieciešams opcionālais piestaļa/šķirtes montāžas komplekts (E15017).

Documentation

Type	Nom
	EN - Notice d'installation - Kit mise à jour de l’unité de puissance ST4000 à MKII

Expert review

Pol CONIN

Digitālās attīstības atbildīgais

« ST4000 upgrade: autopilot performance and integration »

This Raymarine E12093 kit is a practical and cost-effective solution for navigators equipped with an ST4000 autopilot who want to upgrade to a more modern drive unit without replacing their entire system. By integrating the Mk II wheel drive, this kit enables a transition to a more responsive and potentially higher-performance tiller drive, aligned with Raymarine’s Evolution range standards.

In terms of installation, the process is manageable for a knowledgeable user. The instructions cover key steps such as securing the unit to the wheel spokes (using pre-drilled holes) and mounting the bracket (which may require drilling). It is critical to follow EMC installation guidelines to avoid interference, particularly by maintaining adequate clearance from radio transmission equipment. Compatibility with wheels featuring 3 to 8 spokes and steering systems with 1 to 3.5 turns lock-to-lock covers a wide range of cruising sailboats.

The practical value of this kit lies in its ability to revitalize an existing system. Rather than investing in a complete autopilot, this kit offers a targeted upgrade, optimizing the cost-to-benefit ratio for the user. It is particularly relevant for boats where the ST4000 controller is still functional and where the mechanical steering component needs improvement. However, it is essential to verify that the rest of the system (rudder sensor, compass) is in good condition to fully benefit from this upgrade.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

ST4000 jaudas bloka atjaunināšanas komplekts uz MKII

917,30€

917,30€ ~~978,00€~~

Frequently asked questions

Need help? Contact us

What is the Raymarine E12093 update kit?

The Raymarine E12093 update kit is designed to modernize existing ST4000 autopilot systems. It replaces the old power unit with a Mk II wheel drive, integrating the technology of Raymarine's Evolution autopilot range. This kit aims to improve the performance of the helm control unit and extend the lifespan of ST4000 systems.

Which types of wheels are compatible with the drive unit in this kit?

The drive unit included in this kit is compatible with 3-, 4-, 5-, 6-, 7-, or 8-spoke wheels.

What are the dimensions of the drive wheel unit included in the E12093 kit?

The drive unit has a front cover diameter of 228 mm (9.0 in) and an overall diameter of 361 mm (14.2 in). Its height is 135 mm (5.3 in). The motor tube has a diameter of 48 mm (1.9 in) and a length of 171 mm (6.7 in), requiring an additional 60 mm (2.4 in) clearance for the cable.

Is this kit a complete replacement for the ST4000 autopilot system?

No, this kit is a targeted upgrade. It replaces the power unit with a Mk II wheel drive and integrates with the existing ST4000 autopilot controller, but does not constitute a complete system replacement.

What components are included in the E12093 upgrade kit?

The E12093 kit includes the following items:

The wheel drive unitA pedestal mountThree 16 mm radius clamping insertsThree 12 mm radius clamping insertsSix radius clampsSix M5 x 16 mm clamping screwsFour #10 x ¾ in support screwsA 6 mm drill bitA 4 mm drill bitA 3 mm Allen keyTwo ball jointsOne tiller pinThree #8 x ¾ in cheese head screwsOne studTwo nutsTwo #8 x ¾ in countersunk screwsA 4.5 m (15 ft) power cableOne cable clip and one #6 x ½ in screw

What are the main steps to install the drive wheel unit?

Installing the drive unit involves four main steps:

Drilling the clamping holes for the spokes in the front cover.
Mounting the drive unit to the wheel.
Securing the pedestal bracket.
Connecting the drive to the existing control unit.

Is the drive unit compatible with all steering systems?

The unit is designed to operate with steering systems having between 1 and 3.5 turns lock-to-lock.

Should the cover be removed from the drive unit before installation?

Yes, the cover must be removed from the drive unit. The cover is held by three "push-fit" posts that insert into three sockets on the drive ring. To remove it, hold the motor with one hand and pull the cover upward and away from the drive unit.

How to identify the correct spoke mounting holes on the front cover?

The spoke mounting holes are numbered inside the cover. Position the cover arrow upwards and refer to the diagrams in the manual to identify the appropriate locations based on your wheel's number of spokes (for example, for a 5-spoke wheel, drill the 4 holes marked '5'). It is recommended to mark the holes and check their alignment by placing the cover against your wheel.

Is it necessary to cut or modify the supplied cables?

Raymarine's EMC installation guidelines recommend using the cables specified by Raymarine. Cutting and reconnecting these cables can compromise EMC performance and should be avoided unless detailed in the installation manual.

Are there any precautions to take regarding the electrical power supply during installation?

Yes, it is crucial to ensure the electrical power is cut off before making any electrical connections for safety reasons.

Does the product require calibration after installation?

Yes, although the product is supplied with default settings, it is necessary to complete the commissioning procedures detailed in the "Commissioning" section of the relevant autopilot controller manual to ensure optimal performance on your sailboat.

Where should I register my Raymarine product for warranty?

To register your new Raymarine product, you can do so on the Raymarine website at www.raymarine.com/warranty.

What are the recommendations to avoid electromagnetic interference (EMC)?

For optimal EMC performance, Raymarine equipment and connected cables should be:

At least 1 metre (3 feet) away from any equipment transmitting or cables carrying radio signals (e.g., VHF radios, cables and antennas). For SSB radios, this distance must be increased to 2 metres (7 feet).More than 2 metres (7 feet) from the path of a radar beam.Equipment should be powered by a battery separate from the one used for engine starting, to avoid voltage drops and starter transients that could cause equipment to reset.

What is the role of this kit in relation to Raymarine's Evolution technology?

This kit integrates Raymarine Evolution autopilot technology into an existing ST4000 system by replacing the power unit with a Mk II wheel drive.

Is the E12093 kit compatible with autopilot controllers other than the ST4000?

The kit is specifically designed as an "ST4000 power unit upgrade kit to MKII" and integrates with the existing ST4000 autopilot controller. No compatibility with other controllers is mentioned.

What is the length of the power cable supplied with the kit?

The kit includes a power cable with a length of 4.5 meters (15 feet).

Is the kit supplied with the necessary tools for drilling?

Yes, the kit includes a 6 mm drill bit and a 4 mm drill bit, as well as a 3 mm Allen key, required for certain installation steps.

What is the function of the pedestal mount included in the kit?

The pedestal mount is a component included in the kit, essential for securing the drive unit to your boat's helm column, ensuring a stable and secure installation.