Horizontālā caurlaide kabeļu caur jumta klāja caurumu, diametrs 2–6 mm – pelēks kompozīts

The Scanstrut DS-H6 horizontal deck gland is designed to provide professional sealing when routing cables through a deck or bulkhead on a boat. It protects connections from water ingress and helps maintain cable integrity.

The Scanstrut DS-H6 deck gland is made of grey composite, a robust and durable material specifically designed to withstand harsh marine environments.

The Scanstrut DS-H6 is specifically designed for horizontal installation, allowing cable routing flush with a surface such as a deck or bulkhead.

The DS-H6 deck gland kit includes:

An upper shellA baseAn O-ringA blank plug to drillFive pre-drilled plugs for 2, 3, 4, 5 and 6 mm cablesThree self-tapping screwsAn M4x12 bolt

Yes, the DS-H6 cable gland is designed to provide professional waterproofing. It is supplied with a sealing gasket and specific caps to protect the cable passage from water infiltration.

The DS-H6 deck gland is compatible with cables with diameters between 2 and 6 mm. Pre-drilled plugs are provided for diameters 2, 3, 4, 5 and 6 mm.

No, the DS-H6 cable gland is designed for a single cable only. One single plug is used per gland to ensure optimal watertightness.

Yes, the DS-H6 deck gland is ideal for antenna wiring, sensor cables, small electrical bundles, or other marine applications requiring the passage of a small-diameter cable (2 to 6 mm).

Installation of the DS-H6 deck gland requires drilling a hole with a diameter of 28.50 mm (1.12 inches) in the mounting surface.

For the installation of the DS-H6 deck pass-through, you will need the following tools:

A Pozi screwdriver Silicone (for sealing) Drill bits of ø2.5 mm (3/32”), ø3 mm (1/8”) and ø10 mm (25/64”) A 3 mm (1/8”) Allen key

You must select the pre-drilled bung with the diameter closest to and slightly larger than or equal to your cable’s diameter to ensure optimal watertightness. The kit includes bungs for diameters 2, 3, 4, 5, and 6 mm.

If the diameter of your cable does not match the pre-drilled plugs provided, you can use the blank plug included in the kit. This can be custom-drilled to the exact diameter of your cable.

Yes, using silicone is recommended during installation to ensure a perfect seal between the through-hull base and the mounting surface, thus preventing any water infiltration.

Yes, as a Scanstrut product designed for the marine sector and made of composite, the DS-H6 is specifically engineered to withstand harsh marine conditions, including UV exposure, saltwater, and weathering.

The main difference lies in the maximum supported cable diameter. The DS-H6 is designed for cables from 2 to 6 mm, while the DS-H10 is suitable for larger diameters, up to 10 mm. The DS-H6 provides a more compact solution for smaller diameters.