Caurvads caur tilta līdz Ø40 mm, kabelis 12–15 mm — melns kompozīts

This Scanstrut DS40-P-BLK deck gland is designed to accommodate connectors with a diameter up to 40 mm.

This deck gland is specifically suitable for cables with a diameter between 12 and 15 mm.

The Scanstrut DS40-P-BLK deck gland is made of black composite, providing good resistance in marine environments while remaining lightweight.

For installing this deck gland, you will need the following tools:

A Pozidriv screwdriverSealing siliconeA 40 mm hole sawA 2.5 mm or 3 mm drill bit (depending on the hardness of your mounting material)

The DS40-P-BLK is the black composite (plastic) version, which is a lightweight and economical alternative. The DS40-S, on the other hand, is the version made of stainless steel, offering different robustness and finish.

The main difference lies in their capacity and drilling size. The DS40 is designed for connectors up to Ø40 mm and cables from 12-15 mm, requiring a Ø40 mm hole. The DS30 is suited for cables from 9-14 mm and requires a Ø30 mm hole.

Four No. 6X16 self-tapping screws are included in the kit for securing the deck fitting to your mount.

Yes, applying silicone is essential to ensure a perfect seal around the drilled hole and under the deck gland base, thus protecting the interior of your vessel from water.

The drill bit diameter for pilot holes depends on the material of your support:

For soft materials (e.g., plywood): use a 2.5 mm (3/32 inch) drill bit.

Yes, the Scanstrut DS40-P-BLK deck gland is a waterproof cable gland specifically designed to provide reliable water protection for cable penetrations through boat decks.

Yes, this deck gland is designed for vertical installation, making it ideal for cable runs through decks or vertical bulkheads on your vessel.

The black M4X10 bolt is a key component for the bridge deck assembly. It securely fastens the hull to the base, ensuring the structural integrity of the assembly.

Yes, the Scanstrut DS40-P-BLK is a marine-grade product designed specifically to withstand the demanding conditions of marine environments, thanks to its black composite construction.

To ensure optimal sealing, it is imperative to apply marine-grade silicone around the drilled hole and under the bridge deck fitting before securing it with the provided screws. Ensure all surfaces are clean and dry before application.

Yes, the Scanstrut DS40-P-BLK deck gland is delivered with detailed installation instructions to guide you step-by-step through the assembly process.

This bulkhead connector is optimized for cables with a diameter of 12 to 15 mm. For cables with a smaller diameter, a different Scanstrut model, such as the DS30 designed for 9–14 mm cables, would be more appropriate to ensure optimal sealing and compatibility.