Invertors 48/3000 Smart

The Victron Energy Inverter 48/3000 Smart is a device designed to provide reliable pure sine wave alternating current power. It is ideal for marine applications, vehicles, and off-grid residential systems, converting direct current from your batteries into usable alternating current for your devices.

This inverter provides a continuous power output of 3000 VA at 25°C. It is designed to deliver stable power for a variety of equipment.

The Victron Energy Inverter 48/3000 Smart requires a 48V DC input voltage. Its operating range is from 38V DC to 66V DC.

This inverter produces a pure sine wave, which is essential for the proper operation of sensitive electronic equipment. The output voltage is 230V AC ± 2%.

You can monitor and configure the inverter in several ways:

Via Bluetooth: Use the VictronConnect app on your smartphone, tablet, or MacBook for easy configuration and monitoring.Via the VE.Direct port: This port allows wired connection options for deeper system integration, requiring a VE.Direct to USB interface cable or a VE.Direct Smart Bluetooth dongle.

ECO mode is a built-in function that reduces the inverter's standby power consumption to just 2.8 W. When the connected load drops below a predefined threshold, the inverter switches to standby mode. It then reactivates at regular intervals (default every 2.5 seconds) to check the load demand and restarts if necessary.

The Victron Energy Inverter 48/3000 Smart inverter is equipped with multiple protections to ensure its reliability and the safety of your system:

Short-circuit protection on the output.Overload protection.Low or high battery voltage protection.Overheat protection.Protection against AC voltage present on the AC output.Excessive DC ripple protection.

The inverter is designed to operate across a wide temperature range, from -40°C to +65°C. It features fan-assisted cooling to maintain optimal performance.

The Victron Energy Inverter 48/3000 Smart has an IP21 protection rating, meaning it is protected against solid objects larger than 12.5 mm and against vertically falling water droplets.

The inverter dimensions are 485 mm (length) x 285 mm (width) x 150 mm (height).

Yes, thanks to its full-bridge topology with a toroidal transformer, this inverter offers high starting capacity. This allows it to handle demanding loads such as power tools or LED lamp converters that require a power surge at startup.

Yes, in addition to Bluetooth connectivity via a dongle, the VE.Direct port can be connected to a computer using a VE.Direct to USB interface cable. This enables wired configuration and monitoring, providing flexibility for system integration.

Yes, the AC output frequency of the inverter is configurable. By default, it is set to 50 Hz, but it can be adjusted to 60 Hz as needed.

Yes, a remote on/off switch can be connected to a two-pole connector on the inverter. Alternatively, the left contact of the connector can be switched to the battery positive terminal, which is useful in automotive applications by connecting it to the ignition switch. Note that the inverter's front switch must also be set to 'On' or 'ECO' for the inverter to start.

No, the Victron Energy Inverter 48/3000 Smart does not include an integrated automatic transfer switch. To transfer the load to another AC source, an external automatic transfer switch is required. For low-power inverters, Victron Energy recommends the Filax Automatic Transfer Switch, which is an external accessory.

The Victron Energy Inverter 48/3000 Smart inverter is compatible with 48V DC battery systems. It is essential to use batteries with sufficient capacity to fully utilize the inverter's power and ensure stable operation. The inverter's input voltage is 48V DC, with an operating range from 38V DC to 66V DC.