Izolētais lādētājs Orion Tr Smart 12/12-18A (220W) DC-DC

The Orion Tr Smart DC-DC charger can be used as a power supply or as a battery charger. In charger mode, it uses a three-stage charging algorithm to extend battery life, which is particularly useful for vehicles equipped with smart alternators. It also protects the alternator in lithium systems.

This charger accepts input voltages from 8 to 17V. Its nominal output voltage is 12.2V, adjustable from 10 to 15V. It is designed for 12V systems with 12V input and output.

The charger delivers a continuous output current of 18A at 40°C. Its power output is 220W at 40°C, and can reach 280W at 25°C.

Yes, this charger is compatible with smart alternators (Euro 5 and Euro 6). It features an engine-running detection mechanism that prevents it from discharging the starter battery when the alternator is not supplying power, which is critical with these systems.

The charger has built-in engine-running detection. This feature allows the charger to supply power only when the engine is running, preventing the starter battery from discharging and reducing the risk of the vehicle’s voltage dropping too low. No intervention on the vehicle’s system or installation of a separate engine-running sensor is required.

The Orion Tr Smart charger uses a three-stage adaptive charging algorithm: Bulk (fast charge), Absorption (constant voltage), and Float (trickle charge). The absorption duration is automatically adjusted for lead-acid batteries and fixed for lithium batteries, but can be configured via VictronConnect.

Yes, the Orion Tr Smart charger is compatible with lead-acid and lithium batteries. The adaptive charging algorithm can be programmed to suit different battery types, and the absorption time is adjustable via the VictronConnect app to optimize charging.

The charger is configured and monitored via the VictronConnect app through its built-in Bluetooth Smart connectivity. This app, available for Apple and Android smartphones and tablets, allows customization of various charge parameters and real-time data monitoring.

Yes, this model features 200 VDC galvanic isolation between the input, output, and housing. This is a critical safety feature for marine installations and vehicles.

The charger is equipped with extensive electronic protections, including:

Overheat protection (with automatic power reduction above 40°C).Overload protection.Short-circuit protection.Overheat protection for connectors.

Yes, to meet higher current requirements, an unlimited number of Orion Tr Smart units can be connected in parallel, allowing system scalability.

The Orion Tr Smart 12/12-18A (220W) DC-DC charger ensures efficient charging of service batteries with an efficiency of 87%.

Yes, the charger has an IP43 ingress protection rating, meaning it is protected against solid objects larger than 1 mm and water splashes.

The VictronConnect application allows full control of charging parameters and real-time monitoring. It offers features such as adjusting absorption time, locking input voltage, and remote start/stop.

Yes, the charger has a remote on/off function. It can be enabled or disabled remotely via the remote on/off connector or via the VictronConnect app. This allows use cases such as a wired switch or automatic control by a battery management system.

The charger must be mounted vertically on a non-flammable surface, with the power terminals facing downward. It should be installed near the battery, but never directly above it to avoid damage from battery gases.

For optimal cooling, a minimum clearance of 10 cm must be maintained above and below the product. It should also be installed in a heat-resistant environment with adequate ventilation.

Use flexible multistrand copper cables for battery connections. Individual strand diameter must not exceed 0.4mm (0.016 inch) or have a cross-sectional area of 0.125mm² (AWG26). Maximum operating temperature is 90°C (194°F).

Yes, installation must include a fuse. Specific fuse recommendations are detailed in the cables and fuses section of the product manual.

No, the product is not protected against reverse polarity. It is critical to carefully check the polarity before and during the battery connection to avoid any damage.