Orion-Tr pārveidotājs 24/48-2.5A

This isolated DC-DC converter is designed to convert an input voltage of 24V DC into an output voltage of 48V DC. It is ideal for powering equipment requiring a 48V supply from a 24V system.

The Orion-Tr 24/48-2.5A converter provides a continuous output power of 120 W at 25 °C. This power is reduced to 115 W at 40 °C due to high-temperature protection.

The converter accepts an input voltage range of 16 to 35 V DC. The undervoltage cutoff is at 14 V, and restart occurs at 15 V.

Yes, the nominal output voltage of 48.2 V is adjustable. You can manually adjust it via a potentiometer over a range from 40 to 60 V. To decrease the voltage, turn counterclockwise, and clockwise to increase it.

No, this Orion-Tr converter model is not designed for battery charging. For this application, it is recommended to use an Orion-Tr Smart model.

200 V DC galvanic isolation between the input, output, and housing is a critical feature. It prevents ground loops and ensures the safety of sensitive equipment by electrically isolating input and output circuits.

The DC output current is 2.5 A at the nominal output voltage and at a temperature of 25 °C. The maximum output current (for 10 seconds) is 3.0 A.

The converter is equipped with screw terminals for DC connections. No specialized tools are required to install the cables.

Yes, the inverter has a remote on/off terminal. This allows the device to be controlled using a low-power switch or an engine contact, avoiding the need for a high-current switch on the input wiring.

Yes, an unlimited number of units can be connected in parallel to increase the total output current. It is important to always adjust the output voltage before connecting the converters in parallel.

The inverter is protected against high temperatures. The output current will be automatically reduced when the ambient temperature exceeds 40 °C (3 % derating per °C above 40 °C) to ensure the device's longevity.

The Orion-Tr 24/48-2.5A converter has an efficiency of 88%.

Models with a 12 V or 24 V input, like this one, have a non-replaceable internal input fuse. Models with a 48 V input require an external fuse.

The converter dimensions are 100 x 113 x 47 mm (height x width x depth). Its weight is 0.42 kg.

The converter has an IP43 protection rating. This protection is effective when the screw terminals are oriented downward during installation.

A cool, dry, and well-ventilated location is recommended for installing the converter to ensure proper operation and longevity.

The no-load input current (when the inverter outputs voltage with no load applied) is less than 120 mA.

Current draw is less than 200 µA when the inverter is disabled via its remote port.

The screw terminals of the converter can accept a maximum cable cross-section of 6 mm² (AWG10).

Yes, all Orion-Tr models are protected against output short circuits, ensuring the safety of the device and connected equipment.