Mostek połączeniowy 5-biegunowy 400 A do podstawy bezpiecznikowej

The 5-way 400A BEP DC busbar is an electrical component designed to interconnect up to five adjacent DC-rated products, such as fuse holders, in marine installations and recreational vehicles. It is specifically optimized for BEP's Pro Installer system, enabling organized wiring and space-saving installation.

This jumper bar is made from high-purity tinned copper. This material choice ensures maximum electrical conductivity and excellent corrosion resistance, which is essential for marine environments.

The busbar can support a continuous current of 400 amperes across all five positions. If two adjacent positions are linked, the continuous current capacity can reach 650 amperes, allowing for handling higher electrical loads.

You can connect up to five adjacent DC products to this busbar, thanks to its five separate channels.

The main advantages include significant wiring optimization, substantial space savings in the installation, maximum electrical conductivity thanks to tinned copper, and increased corrosion resistance, extending the lifespan of the installation.

The overall dimensions of the tiller extension are 8.8 inches in length by 1 inch in width. These compact dimensions allow for clean and optimized installations.

Yes, absolutely. It is made from high-purity tinned copper, a material specifically chosen for its strong resistance to corrosion, making it ideal for demanding marine environments.

It simplifies wiring by consolidating connections from multiple electrical components, such as fuse holders, into a single point. This reduces the need for long, complex individual cables, thereby decreasing clutter and making wire management easier.

The spacing between the mounting holes or connection studs on this tie bar is 2 inches.

This busbar is primarily designed for 12 V or 24 V DC electrical installations in marine and recreational vehicle applications, where reliability and space optimization are critical.

The busbar is typically installed by securing it directly to the rear of adjacent components, such as fuse holders or battery switches, using 3/8-inch connection studs. Ensure all connections are clean and properly tightened.

For installation, you will need appropriate tools to tighten nuts on 3/8-inch studs, such as a socket wrench or an adjustable wrench of the corresponding size. It is also recommended to use a screwdriver if the components to be connected require additional fasteners.

The tie bar is designed for 3/8-inch studs, which is a standard size for many high-current electrical connections in marine applications.

Yes, the design of the tie rod allows for some flexibility in its mounting orientation, as long as it can be securely fastened to adjacent components and wiring access is maintained. However, it is always best to follow the manufacturer's specific recommendations for optimal installation.

Yes, it is very important to tighten all electrical connections to the torque recommended by the manufacturer of the connected components (fuse holders, etc.) to ensure good electrical conductivity and avoid loosening due to vibrations. Over-tightening or insufficient tightening can lead to performance or safety issues.

This tie bar is specifically designed to integrate with BEP's Pro Installer system. It is therefore compatible with fuse holders and other products in the Pro Installer range that use 3/8 inch studs with a 2 inch spacing.

Although optimized for the BEP Pro Installer system, this busbar can be used as a high-current link in various applications. It is compatible with any electrical component featuring 3/8" studs and a 2" spacing between connection points.

Yes, this tie bar is designed to handle direct current and is compatible with 12V, 24V and other common DC voltages in marine and recreational vehicle applications, provided the current rating of 400A (or 650A) is not exceeded.

Modifying or cutting the interconnect bar is not recommended. Any alteration could compromise its structural integrity, electrical conductivity, and rated current capacity, potentially voiding its performance and safety.

Yes, in addition to marine applications, this busbar is also fully suitable for use in leisure vehicles (motorhomes, caravans) or other automotive applications requiring reliable DC power distribution and space savings, provided the current and stud size specifications are met.