Oprawa bezpiecznikowa klasy T 600 A

A class T fuse holder is an electrical protection component designed to handle very high currents and provide superior interrupting capacity. It is crucial for the safety of marine electrical systems, particularly those powering high-consumption equipment such as powerful inverters, bow thrusters, or large battery banks. Its high interrupting capacity enables rapid and safe disconnection in the event of a short circuit, thus preventing equipment damage and fire hazards.

The primary function of this fuse holder is to protect marine electrical circuits from overcurrents and short circuits. It is specifically designed for high-power applications, capable of handling currents ranging from 450 to 600 A at 50 VDC, with a very high interrupt rating of 20,000 to 50,000 A.

This fuse holder is ideal for protecting high-power electrical equipment in marine systems. This includes powerful inverters, bow thrusters, and large-capacity battery banks, where maximum protection against overcurrent is essential.

The BEP 778-T2S-600 fuse holder has compact dimensions of 147 mm in length, 49 mm in width, and 61 mm in height (5.8 x 1.9 x 2.4 inches).

The BEP 778-T2S-600 fuse holder weighs 382 grams (approximately 13.5 oz).

This fuse holder is designed to operate with a maximum voltage of 50 VDC (direct current).

The BEP 778-T2S-600 fuse holder offers a high interrupting rating, ranging from 20,000 to 50,000 A. This feature is critical for safety in the event of very high short-circuit currents.

The T-class fuse holder 778-T2S-600 provides significantly higher protection compared to standard ANL-TP fuse holders. While a typical ANL-TP handles 35–500 A with a 3,000 A DC interrupt rating, the 778-T2S-600 manages 450–600 A with an interrupt rating of 20,000 to 50,000 A. This robustness makes it essential for circuits where very high short-circuit currents may occur.

No, the BEP 778-T2S-600 fuse holder is sold separately. The corresponding class T fuse (450-600 A) must be purchased separately.

Yes, the BEP 778-T2S-600 fuse block is specifically designed as a high-performance electrical protection solution for demanding marine systems, ensuring robustness and reliability suited to this environment.

This fuse holder is specifically designed for class T fuses. It is compatible with class T fuses rated for currents between 450 and 600 A.

The connecting studs for the cables have a diameter of 10 mm (3/8").

Yes, this fuse block model is part of current BEP solutions for marine power management and complements CZone systems for an integrated and secure electrical architecture.

Yes, this fuse holder is designed for a maximum voltage of 50 VDC, making it fully compatible and safe for use with 12 V or 24 V marine electrical systems.

The connector studs for cables have a diameter of 10 mm (3/8"). Studs specifically designed for class T fuses have a diameter of 12 mm (0.47").

The two additional studs integrated into the fuse holder provide versatile connection points. They can be used for auxiliary or bypass applications, thereby increasing the flexibility of your electrical system.

Yes, this BEP-branded product comes with the manufacturer's standard warranty covering manufacturing and material defects.