Płytka przełączników wodoodpornych WeatherDeck® 12 V DC – 4 pozycje

The BLUE SEA WeatherDeck® 12V DC Waterproof Switch Panel - 4 Position (model 4305-BSS) is a watertight switch panel designed for marine environments. It is a "switch-only" model, meaning it does not include built-in circuit protection or backlighting. It is intended to control up to four separate circuits aboard your vessel.

No, the BLUE SEA WeatherDeck® 4305-BSS panel is a "switch-only" model. It does not include built-in circuit protection (fuses or circuit breakers) or backlighting. Circuit protection must be managed remotely or via an external digital switching system.

The BLUE SEA WeatherDeck® 4305-BSS panel is made with materials resistant to the marine environment:

The cover is made of UV-resistant thermoplastic. The panel itself is made of UL-V0 flame-resistant thermoplastic.

Yes, the BLUE SEA WeatherDeck® 4305-BSS switch panel is supplied with a set of square-format labels (PN 4215) to identify your circuits.

The BLUE SEA WeatherDeck® 4305-BSS switch panel is designed to operate at a maximum rated voltage of 24V DC.

Each individual circuit of the BLUE SEA WeatherDeck® 4305-BSS panel can support a maximum current of 15A.

The total cumulative capacity of the BLUE SEA WeatherDeck® 4305-BSS panel is 45A.

Yes, the BLUE SEA WeatherDeck® 4305-BSS panel includes switch guards to reduce the risk of accidental activation.

Yes, the BLUE SEA WeatherDeck® 4305-BSS front panel is rated IP67. This means it is protected against immersion up to 1 meter for 30 minutes, provided it is correctly installed with the supplied sealing gasket.

To ensure the watertight integrity of the BLUE SEA WeatherDeck® 4305-BSS panel, it is essential to seal it properly to the mounting surface. The supplied sealing gasket must be in place, and the panel must be firmly screwed down.

Yes, the BLUE SEA WeatherDeck® 4305-BSS panel can be mounted in any of the four possible orientations, offering great installation flexibility.

The switches on the BLUE SEA WeatherDeck® 4305-BSS panel are not ignition-protected. Therefore, the panel must NOT be installed in an explosive environment, such as a gasoline engine compartment or a battery compartment.

Yes, it is imperative to disconnect all AC and DC power sources before starting the electrical installation of the BLUE SEA WeatherDeck® 4305-BSS panel for safety reasons.

For the electrical connections of the BLUE SEA WeatherDeck® 4305-BSS panel:

Connect the +12V DC or 24V DC to the 12 AWG power feed wire bundle (Bus). Use a properly sized power wire and circuit protection for safe operation up to the panel’s cumulative capacity. Connect the positive side of each device to a switch output terminal. Connect the negative side of each device to the DC negative.

Yes, a cutting template is provided to help you prepare the mounting opening required for installing the BLUE SEA WeatherDeck® 4305-BSS panel.

The BLUE SEA WeatherDeck® 4305-BSS weather-resistant front panel snaps in and out. To remove it, press the palm of your hand on the label area and pull on the edge of the cover. This provides access to the components and hides the mounting screws.

Yes, the BLUE SEA WeatherDeck® 4305-BSS switch panel is compatible with marine electrical systems operating on 12V DC or 24V DC.

Yes, the BLUE SEA WeatherDeck® 4305-BSS panel is a "switch-only" model and does not include built-in circuit protection. It is designed for installations where circuit protection (fuses or circuit breakers) is located outside the panel and must be provided separately for each circuit.

Blue Sea Systems supports its products for as long as you own them. For detailed information, you can visit the Blue Sea Systems website at www.bluesea.com/about.