Światło klasyczne - poziome - statek <20 m - trójbarwne

The Mantagua reference 00102 is a classic tri-color navigation light. It combines port (red), starboard (green), and stern (white) lights into a single unit, designed to be mounted at the masthead.

This tricolour navigation light is specifically designed for boats under 20 metres (or 65 feet).

This light is fitted with Mantagua LED bulbs, which results in very low power consumption compared to traditional bulbs.

The power consumption of this light is 2.4 Watts. This represents a significant reduction, up to eight times less than classic bulbs.

The Mantagua 00102 tricolour navigation light provides a luminous range of 2 nautical miles (2 NM), ensuring good visibility at sea.

The light intensity of this beacon is greater than 5.4 candela, ensuring effective signaling.

The dimensions of this light are L 85 x W 85 x H 105 mm, making it compact for masthead installation.

The weight of this tricolour navigation light is 260 grams.

No, Mantagua masthead lights, including this model, are designed not to interfere with AIS or VHF systems, a critical requirement for safety and communication at sea.

This light operates on a 9 to 30 VDC (direct current) supply, making it compatible with most boat electrical systems (12V or 24V).

This light was CE certified in 2016 by an independent laboratory and complies with IEC 60945 4th edition 2002-08, as evidenced by report 204009 EMC Ed. 1.2.

This light has IP67 protection, meaning it is fully protected against dust and can be temporarily immersed in water without damage.

This light is designed for horizontal installation at the masthead.

Yes, this light is compatible with a 12 V electrical system as it operates within a voltage range of 9 to 30 VDC.

Yes, this light is compatible with a 24 V electrical system as it operates within a voltage range of 9 to 30 VDC.

Mantagua LED bulbs offer up to eight times lower power consumption compared to traditional bulbs, thereby extending the boat’s battery life.

No, this model (reference 00102) is a tricolour light. It does not serve as an anchor light (360° white).

This model (00102) is designed for larger boats (range over 2 MN) and higher luminous intensity (> 5.4 candela) compared to tricolour models for boats under 12 meters (which typically have a range of 1 MN and intensity > 1.1 candela).

The light is designed for horizontal installation at the top of the mast. Its compact dimensions and light weight (260g) make positioning easier. However, it is always recommended to use a professional for electrical installation and compliance with maritime regulations.

Yes, with its IP67 rating, this light is designed to withstand harsh marine environments, including exposure to water and dust.

The Mantagua 00102 is a classic tricolour navigation light, designed for sailing. It is specifically a horizontal-mount model, intended to be installed at the masthead.

This light is fitted with Mantagua LED bulbs, which significantly reduces power consumption, up to eight times lower than traditional bulbs.

The Mantagua 00102 tricolour light provides a luminous range of 2 nautical miles (2NM), ensuring optimal visibility for navigation.

The light intensity of this beacon is greater than 5.4 candela, which contributes to its visibility of 2 nautical miles.

The compact dimensions of this light are L 85 x W 85 x H 105 mm, making it suitable for masthead installation.

The Mantagua 00102 tricolour light weighs 260 grams, which is lightweight and suitable for installation at height.

This light's power consumption is only 2.4W, thanks to its energy-efficient LED technology.

This navigation light operates on a voltage range of 9 to 30 VDC, making it compatible with most boat electrical systems (12V and 24V).

The Mantagua 00102 light has IP67 protection, meaning it is fully protected against dust and can be temporarily submerged without water ingress.

No, this light is designed not to interfere with AIS and VHF systems. It was CE-certified in 2016 by an independent laboratory, confirming compliance and the absence of interference.

A tricolour navigation light is a combined navigation light projecting the port-side (red), starboard-side (green) and stern (white) lights from a single point at the masthead. It is used at night to indicate the position and direction of a vessel under 20 metres.

This is a tricolour navigation light. Its primary function is to indicate position during night navigation. It is not an anchor light (360° white).

This light is specifically designed for boats under 20 meters (or 65 feet), in compliance with maritime standards for this type of equipment.

Yes, thanks to its 9 to 30 VDC power supply voltage range, this light is compatible with the 12V and 24V electrical systems commonly found on boats.

No, this light is specifically certified and designed for vessels under 20 meters. Using it on larger ships would not comply with maritime regulations.

This light is designed for horizontal installation at the masthead. This position ensures optimal visibility of tricolour signals.

For optimal performance and compliance with regulations, the light must be mounted horizontally at the masthead in a clear position to ensure unobstructed 360-degree visibility.

The Mantagua 00102 light is CE certified and compliant with IEC 60945 4th edition 2002-08, as evidenced by report 204009 EMC Ed. 1.2.

This navigation light was CE certified in 2016 by an independent laboratory, ensuring compliance with European standards.

Yes, the Mantagua 00102 navigation light is positioned as a modern alternative to traditional navigation lights. Thanks to its LED technology, it delivers superior technical performance and reduced power consumption while complying with maritime standards.