Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 14%

Mastervolt

77030500

Izhodni večnamenski stikalo

The Mastervolt Multipurpose Contact Output is a programmable DC relay for the MasterBus network. It allows control of a 12/24 V device up to 1 A (fan, alarm, generator contactor) based on configured events. Delivery includes the module, screw terminal block, MasterBus cable, MasterBus terminator, and user manual.

Public priceGet pro pricing

184,50€

184,50€ ~~216,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Nazivna napetost	30 V
Jakost toka	1.0
Število krogov	1.0
Število polov	1 pole
Podprti baterijski sistemi	0.0
Tip baterijskega stikala	Not applicable
Metoda kontrole baterijskega stikala	Not applicable
Vrsta ponovnega vklopa odklopnika	Not applicable
Vrsta varovalke	Not applicable
Nazivna kontinuitetna ocena DVSR	0.0
Tip montaže	DIN rail
IP razred	IP21
Tip zaslona	Not applicable
Žično omrežje	MasterBus
Certifikati	CE
Dimenzije (D x V x G)	66 x 78 x 32
Teža	0.08
Konfiguracija kontaktov	NO-C-NC
Velikost DIN vodila	30
Prikaz jezikov	English, Dutch, German, French, Spanish, Italian, Danish, Swedish, Finnish, Norwegian
LED indikator stanja	Yes
Priročnik vključen	Yes
Vključena kabel MasterBus	Yes
Vrsta konektorja MasterBus	MasterBus proprietary connector
Napajanje MasterBus	No
Poraba moči MasterBus (mW)	132
Vključen zaključni člen MasterBus	Yes
Globina izdelka	32
Višina izdelka	78
Tip izdelka	Multifunction contact output
Netna teža izdelka	80
Teža embalaže izdelka	0.3
Širina izdelka	66
Maksimalni napon releja	30
Vključeni vijčni terminal	Yes
Območje temperatur skladiščenja	-30 to 70
Garancija	2

Detailed description

Večnamensko stikalo Mastervolt je enojni rele, ki ga upravlja omrežje MasterBus. Omogoča daljinsko vklapljanje naprav 12/24 V do 1 A, kot so ventilator, zvočni alarm ali agregat, v odvisnosti od dogodkov, ki jih je mogoče konfigurirati na omrežju. Ta modul je preprost in zanesljiv način za dodajanje funkcij avtomatiziranega upravljanja v vašo vgrajeno električno napeljavo.

Programirljiv rele za avtomatizacijo na krovu

Za razliko od standardnega releja se ta modul vključi v omrežje MasterBus in ga lahko upravlja katera koli združljiva naprava (masni polnilec, MasterShunt, DC Distribution). Omogoča ustvarjanje scenarijev avtomatizacije: vklop ventilatorja baterijskega predala, ko polnilec ni v redu, aktivacijo zvočnega alarmu ob nizki napetosti baterije ali vklop stikalnega stika agregata. Večnamensko stikalo ponuja funkcije časovnega zakasnitve (minimalni/maximalen čas delovanja) in enosekundni vklopni impulz, kar je bistveno za nekatere agregate. Odlikuje se pred standardnimi vhodno-izhodnimi moduli (npr. MasterBus Analog Interface) po preprostosti in nizki ceni, saj je namenjen le eni funkciji preklopa.

Poenostavljena namestitev in integracija

Modul se namešča na DIN vodilo 30 mm in se poveže z omrežjem MasterBus preko vključene kabla in konektorja. Zaradi majhne velikosti (66 x 78 x 32 mm) in nizke porabe (132 mW) je diskreten in ekonomičen. Namestitev vključuje le povezavo podatkovnega omrežja in priklop kroga, ki ga je treba nadzorovati, na vijačni terminal (suhi stik NO/NC/COM, 1 A / 30 V DC). Konfiguracija dogodkov se izvaja preko zaslona MasterBus ali programske opreme MasterAdjust. V kompletu so vijačni terminal, kabel MasterBus, MasterBus terminator in uporabniški priročnik.

Documentation

Type	Nom
	FR - Manuel d'utilisation - Sortie Contact Multifonctions
	FR - Manuel d'utilisation - Sortie Contact Multifonctions
	EN - Manuel d'utilisation et d'installation - Sortie Contact Multifonctions

Expert review

Pol CONIN

Odgovorni digitalni delavec

« A compact smart relay for the MasterBus network »

The Multipurpose Contact Output is a small, highly practical module for adding a controlled switching function to a MasterBus network. It is not a revolutionary product, but a reliable, field-proven basic component. Its main advantage is simplicity: it replaces a conventional relay with programmable control logic. It is ideal for simple tasks such as managing a battery compartment fan, activating an alarm, or controlling a small contactor. Note that its dry contact is limited to 1 A and is not designed to switch high power directly. For this, it must be used to drive a more powerful contactor. It is an excellent complement to Mass chargers and MasterShunt battery monitors for creating basic automation without breaking the bank.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Izhodni večnamenski stikalo

184,50€

184,50€ ~~216,00€~~

Frequently asked questions

Need help? Contact us

How do I install the Multipurpose Contact Output on my MasterBus network?

Installing the Multipurpose Contact Output is straightforward. It mounts on a 30 mm DIN rail. Connect the MasterBus cables to the dedicated connector, then wire your equipment (fan, alarm, etc.) to the screw terminal, following the labels: input (1), normally closed output (2), and normally open output (3). The relay’s maximum current is 1 A.

Is this module compatible with all Mastervolt chargers?

Yes, the Multipurpose Contact Output is compatible with Mastervolt chargers equipped with the MasterBus data bus, such as the ChargeMaster or the Mass Charger. It can be configured as a charger status interface (CSI) to trigger an action in case of a fault.

What is the maximum voltage the relay contact can handle?

The potential-free contact of the Multipurpose Contact Output can handle a maximum voltage of 30 V DC and a maximum current of 1 A. It is designed for 12 V or 24 V applications.

Can I use this module to control a generator?

Yes, this is a typical use case. The Multipurpose Contact Output can be configured to start and stop a generator. It includes a 1-second start pulse option required by some generators, as well as minimum and maximum runtime delays.

What types of equipment can I order with this contact output?

You can order any 12/24 V equipment consuming less than 1 A, such as a battery compartment fan, a buzzer, an alarm, a generator contactor, or a power supply. The relay is a dry contact (NO/NC/COM).

How to configure the minimum runtime of the relay?

Configuration is done via the MasterBus menu. You can enable the 'Min. runtime' option and set the duration between 15 minutes and 45 days. The factory setting is 15 minutes.

Is this module compatible with the MasterShunt?

Yes, the Multipurpose Contact Output is compatible with the MasterShunt. You can, for example, configure an event so the relay activates when the battery level is low, to start a generator.

What is the IP protection rating of this product?

The Multipurpose Contact Output has an IP21 protection rating, meaning it is protected against access to hazardous parts with a finger and against vertically falling water droplets. It is suitable for installation inside the boat, in a dry location.

Can I change the device name in the MasterBus network?

Yes, you can customize the device name. By default, it is called 'DC Relay', but you can rename it with up to 12 characters via the configuration menu.

What does the LED indicator on the module mean?

The communication LED lights up when the relay state is 'activated' (Activate). It allows you to visually check if the relay is operating.

Can the Multipurpose Contact Output be used with a 24 V system?

Yes, the module is designed for 12 V and 24 V systems. The relay contact supports up to 30 V DC, making it fully suitable for 24 V installations.

How to reset the Multipurpose Contact Output to factory defaults?

Factory reset is typically performed via the MasterBus configuration software. Refer to the user manual for the exact procedure, as it may vary depending on the firmware version.

Can I use this module as an interface for a battery level alarm?

Yes, this is a common application. By configuring an event on a MasterShunt or another battery monitor, you can make the Multipurpose Contact Output trigger a sound or visual alarm when the battery voltage reaches a critical threshold.

Is the product delivered with the MasterBus cable and connector?

Yes, the delivery includes a MasterBus cable, a MasterBus connector, a screw terminal block, and the user manual. All the necessary components for a basic installation are provided.

How to configure a one-second start pulse for a generator set?

In the Multipurpose Contact Output configuration menu, enable the 'Puls. (1sec)' (1 sec pulse) option. This will generate a one-second pulse when the relay is activated, which is required for certain generator starters.

Can I use this module to control a battery compartment fan?

Yes, this is a typical use case. You can configure an event on the Mass charger so the relay activates a fan when the charger is running or in fault mode, to vent gases.