Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 4%

Raymarine

E70340

Sonda bronasta prečna s stožčastim snopom HIGH CHIRP, kot 12° CPT-S, 10 m kabla

La sonde bronze traversante RAYMARINE E70340 CPT-S offre une détection sous-marine précise grâce à son faisceau conique HIGH CHIRP de 12°. Conçue pour une durabilité accrue en milieu marin, elle est idéale pour les MFD Raymarine compatibles nécessitant un sonar traditionnel performant. La sonde est fournie avec un câble de 10m intégré.

Kot: 12 stopinj

0 stopinj 12 stopinj 20 °C

Public priceGet pro pricing

308,58€

308,58€ ~~324,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Podprte sonar tehnologije	CHIRP Haute Fréquence
Frekvence sonarja	170-230
Delovna temperatura	-10 à +50
Maksimalna globina merjenja	274.0
Material sondne sonde	Bronze
Tip konektorja za sonar	Raymarine CPT-S
Dolžina kabla	10.0
Združljivi prikazovalniki	Raymarine Axiom, Element, Dragonfly (avec adaptateur si nécessaire)
Globina izdelka	100
IP razred	IPX6/IPX7
Brezžična povezanost	Non
Tip montaže	Traversante
Certifikati	2013/53/EU,EN ISO 8846:2017
Kot prekrivanja snopa	25
Visoka frekvenca CHIRP	170-230
Vgrajen senzor hitrosti	Non
Leto izdaje	2017.0
Garancija	2.0

Detailed description

Bronasta prečna sonda E70340 od RAYMARINE je podvodna detekcijska rešitev, zasnovana za sonarske sisteme CHIRP. Ta model CPT-S je prečna sonda iz bronze s stožčastim snopom HIGH CHIRP, ki zagotavlja kot 12° za kompenzacijo V trupa. Vključen je 10-metrski kabel, kar olajša namestitev na različnih plovilih.

Precizna sonar tehnologija CHIRP

Ta sonda je integrirana v serijo CPT-S podjetja Raymarine in uporablja tehnologijo HIGH CHIRP za zagotavljanje podrobnih sonarnih odzivov in izboljšano ločevanje tarč. V nasprotju s sistemi DownVision, ki nudijo foto realistično sliko dna, se ta model osredotoča na tradicionalni stožčast snop, optimiran za detekcijo rib in natančno sleditev morskega dna v različnih globinah. Njena konstrukcija iz bronze jo uvršča med bolj odporne opcije od verzij iz plastike (npr. A80447 za enak kot 12°), kar je posebno primerno za zahtevna morska okolja in trupe iz lesa ali steklenih vlaken.

Namestitev in skladnost

Sonda E70340 je namenjena prečni namestitvi, kar zahteva vrtanje v trup. Kot 12° je izbran posebej za trupe z zmernim deadrisejem, kar zagotavlja, da je sonarni snop usmerjen navpično proti dnu. Kabel sonde je izjemno pomembno ne rezati, saj bi to močno zmanjšalo zmogljivost sonarja, razveljavilo garancijo in prekršilo evropsko oznako CE. Ta izdelek je v skladu z harmoniziranimi normami 2013/53/EU in EN ISO 8846:2017, kar zagotavlja njegovo zanesljivost in varnost za uporabo na morju. Za optimalne rezultate je sondo uporabljajte izključno v vodi, da se prepreči pregrevanje.

Documentation

Type	Nom
	EN - Plan technique - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	FR - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis of the Raymarine CPT-S bronze 12° CHIRP transducer »

The Raymarine CPT-S E70340 transducer is a technically sound choice for recreational boaters and anglers seeking a reliable and robust CHIRP sonar solution. Unlike RealVision 3D multi-element sensors that provide sophisticated imaging, this model focuses on the performance of a dedicated HIGH CHIRP conical beam. Its bronze construction is a major durability asset, outperforming plastic versions in harsh marine environments, especially for boats kept afloat year-round or in saltwater. It is particularly well-suited to wooden or fiberglass hulls, where a through-hull installation is preferred to avoid turbulence.

The 12° beam angle of the transducer is specifically designed to compensate for the deadrise of hulls with moderate angles, ensuring the sonar beam is perpendicular to the seabed for optimal readings. It is essential to verify the compatibility of this angle with your hull design before installation to avoid beam tilt that would degrade performance. Although the CPT-S series is a previous generation compared to newer RealVision systems, it remains relevant for compatible Raymarine MFDs (such as Dragonfly models or certain A, eS, gS series) requiring a traditional CHIRP sonar for precise fish detection and bathymetry.

A through-hull installation, while more complex than a transom-mount setup, offers superior hydrodynamic performance and better transducer protection. It requires careful attention to hull drilling and watertight sealing to maintain the vessel's integrity. This transducer does not provide DownVision or SideVision imaging; it should be prioritized if your primary need is a high-performance traditional CHIRP sonar without advanced imaging features, or if you are complementing an existing system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda bronasta prečna s stožčastim snopom HIGH CHIRP, kot 12° CPT-S, 10 m kabla

308,58€

308,58€ ~~324,00€~~

Frequently asked questions

Need help? Contact us

What is HIGH CHIRP technology and what is the purpose of the cone beam of this depth sounder?

The HIGH CHIRP technology used by this Raymarine CPT-S depth sounder provides very detailed sonar returns and better target separation underwater. Unlike DownVision imaging systems, the traditional cone beam of this depth sounder is optimized for precise fish detection and seabed tracking at various depths.

Why does this thru-hull transducer have a 12° angle?

The 12° angle of this transducer is specifically designed to compensate for the deadrise of your vessel's hull. This ensures the sonar beam is directed vertically toward the seabed, providing optimal performance and accurate readings, particularly for hulls with moderate deadrise.

What type of installation is required for this Raymarine transducer?

This transducer is a through-hull model, meaning it requires drilling the hull of your boat for installation. Raymarine recommends installation by a certified installer to ensure proper implementation and to benefit from the enhanced warranty.

Can I cut the depth sounder cable if its 10-meter length is excessive for my boat?

No, it is imperative not to cut the depth sounder cable. Trimming the cable will significantly reduce the fishfinder's performance, void the product warranty, and invalidate the European CE mark. If the cable is cut, it cannot be repaired and must be replaced.

Which Raymarine devices is this CPT-S transducer compatible with?

This CPT-S transducer is designed to be compatible with Raymarine CHIRP sonar systems. It generally works with Raymarine multifunction displays (MFD) from the Axiom and Element series, as well as with certain Dragonfly models that support CPT-S conical-beam transducers.

Why is this transducer made of bronze rather than plastic?

This transducer is made of bronze to provide increased durability, particularly suited to demanding marine environments. Bronze is a more robust option than plastic and is recommended for fiberglass or wooden hulls, ensuring better longevity and resistance to the elements.

How should I maintain and clean my depth sounder to ensure its performance?

To maintain your depth sounder's performance, follow these recommendations:

Apply a thin coat of water-based antifouling paint to the depth sounder to prevent marine growth buildup. Reapply every 6 months or at the start of each season.

Clean the depth sounder with a soft cloth and mild household detergent.

For stubborn grime, use a scrubbing pad such as Scotch Brite™, ensuring you do not scratch the face of the depth sounder.

Warning: Never use ketone-based paint, spray paint, or harsh cleaning solvents such as acetone, as these will damage the depth sounder.

Which compliance standards does this Raymarine transducer meet?

This Raymarine E70340 transducer complies with European harmonized standards. It meets Directive 2013/53/EU for marine equipment and EN ISO 8846:2017, ensuring reliability and safety for marine use.