Sonda CPT-100DVS za mizo CHIRP, sonder in temperatura, neposredna povezava CP100, zasloni xx8 in AXIOM DV (kabel 10 m)

The Raymarine CPT-100DVS transducer (part number A80351) is a transom-mounted transducer designed to provide accurate depth sounder and temperature data. It uses CHIRP DownVision technology for detailed underwater imaging, complemented by a traditional fishfinder for fish detection and depth measurement.

The CPT-100DVS transducer uses CHIRP DownVision technology. This technology emits a frequency sweep over a wide band, enabling target separation and superior image clarity for detailed visualization of underwater structures.

The CPT-100DVS fishfinder provides depth sounder data for fish detection and depth measurement, along with detailed underwater imaging via DownVision technology. It also includes a temperature sensor for essential environmental data.

The CPT-100DVS is a transducer designed for transom mounting. This design simplifies installation without requiring major hull drilling.

The CPT-100DVS depth sounder comes with a 10-meter cable, providing flexibility for installation on a variety of sailboats.

No, the CPT-100DVS is a dedicated DownVision sounder solution. It differs from Raymarine's newer RealVision or HyperVision transducers, which include 3D and SideVision capabilities.

Yes, the CPT-100DVS transducer includes a temperature sensor. This allows it to provide essential environmental data in addition to depth sounder and underwater imaging information.

The CPT-100DVS transducer is specifically designed for targeted CHIRP DownVision performance. It differs from newer transducers like RealVision or HyperVision, which offer additional features such as 3D imaging and SideVision.

The CPT-100DVS transducer is compatible with the xx8 series multifunction displays and Raymarine AXIOM DV (DownVision) models.

Yes, the CPT-100DVS transducer is designed to connect directly to Raymarine CP100 sounder modules.

Yes, the CPT-100DVS transducer is compatible with Raymarine xx8 series multifunction displays, enabling seamless integration for depth and underwater structure data display.

Yes, the CPT-100DVS transducer is compatible with Raymarine AXIOM DV (DownVision) models, providing direct connectivity to optimize fishfinder data display.

No, the CPT-100DVS transducer is specifically designed for CHIRP DownVision technology. It does not include 3D or SideVision capabilities found in newer Raymarine RealVision or HyperVision transducers.

The CPT-100DVS delivers similar DownVision performance to a CPT-60 transducer but is specifically designed for direct compatibility with multifunction displays and sounder modules listed (xx8 series, AXIOM DV, CP100), ensuring smoother integration.

Yes, Raymarine recommends a certified installation performed by a Raymarine authorized installer. This may allow access to an enhanced warranty.

To clean the transducer, use a soft cloth and a mild household detergent. For stubborn dirt buildup, use a green Scotch-Brite pad. It is important to prevent marine growth by applying a thin layer of water-based antifouling paint over the transducer.

Yes, a thin layer of water-based antifouling paint can be applied to prevent marine growth accumulation. However, it is critical to never use ketone-based paint as this could damage the sensor. Do not use spray paint either.

Certified installation performed by a Raymarine-approved installer ensures an enhanced warranty. Any unauthorized intervention by Raymarine voids the device warranty.