Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 11%

Raymarine

T912

Senzor za vlečno sonaro

Le Raymarine T912 est un émetteur de coque, agissant comme interface pour vos capteurs de profondeur, vitesse et température, et non comme capteur sondeur rétractable. Il est conçu pour une alimentation 12/24 Vcc et requiert une installation ventilée au-dessus de la ligne de flottaison. Ce module essentiel assure la conversion des signaux de transducteurs pour les systèmes d'instruments Raymarine. Sont inclus avec ce produit les vis auto-foreuses pour le montage.

Public priceGet pro pricing

143,08€

143,08€ ~~162,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Delovna napetost	12/24 V
Tip konektorja za sonar	Bornier à vis
Širina izdelka	52.5 mm
Vgrajen senzor temperature	Non
Višina izdelka	42.5 mm
Združljivi prikazovalniki	Systèmes d'instruments Raymarine
Brezžična povezanost	Non
Tip montaže	Montage en surface
Vgrajen senzor hitrosti	Non

Detailed description

Oddajnik na trupu Raymarine T912 je vmesnik, namenjen povezavi senzorjev globine, hitrosti in temperature z električnim napajanjem 12/24 V enosmerne napetosti vaše ladje. Namenjen je zbiranju in prenosu podatkov iz pretvornikov, zagotavlja pa integracijo ključnih informacij za navigacijo in delovanje. Ta modul je bistven sestavni del sistemov instrumentov Raymarine, ki zahtevajo centralizacijo analognih podatkov iz senzorjev.

Namestitev in priključitev

Za zagotovitev pravilnega delovanja in trajnosti mora biti T912 nameščen na specifičen način. Montirati ga je treba najmanj 50 cm nad vodno črto, v prostoru z dobro prezračevanjem, ne v vodotesnem prostoru, da se prepreči kopičenje vlage ali toplote. Enota se namešča navpično, s kabli, ki izhajajo spodaj. Montaža poteka preko treh lukenj s premerom 2,5 mm, z uporabo samoreznih vijakov, ki so priloženi. Posebno pozornost je treba nameniti zategi vijakov, da se ne poškoduje ulitek.

Priključitev kablov pretvornika mora slediti barvnemu kodu, ki je naveden na enoti. Za Triducerje mora biti pletenica mase nujno povezana na konektor globine in ne na tistega hitrosti, da se preprečijo kratki stiki. Če pretvornik hitrosti nima senzorja temperature, je treba povezati rjavi in beli vodnik konektorja hitrosti. Nanesenje silikonske maščobe na kontakte je priporočljivo za optimizacijo prevodnosti in zaščite. Enota je združljiva z napajanjem 12/24 V enosmerne napetosti in jo je mogoče napajati tudi s sončnim panelom Raymarine, če na krovu ni drugih virov energije.

Documentation

Type	Nom
	EN - Gabarit de montage - Capteur sondeur rétractable
	EN - Notice d'installation - Capteur sondeur rétractable
	EN - Manuel d'utilisation - Capteur sondeur rétractable
	EN - Manuel d'utilisation - Capteur sondeur rétractable
	EN - Manuel d'utilisation - Capteur sondeur rétractable
	EN - Manuel d'utilisation - Capteur sondeur rétractable
	EN - Manuel d'utilisation - Capteur sondeur rétractable

Expert review

Pol CONIN

Odgovorni digitalni delavec

« Technical analysis of the Raymarine T912 hull transducer »

The Raymarine T912 hull transmitter is a critical component for any navigation instrument installation. It is not a sensor itself, but an essential interface unit that converts analog signals from your transducers (depth sounder, speed log, temperature) into a format usable by the boat's electrical system, typically for displays or processors. Its practical value lies in its ability to centralize and ensure the reliable transmission of fundamental data.

During installation, it is crucial to follow mounting guidelines: positioning more than 50 cm above the waterline and in a ventilated space protects the unit from direct environmental stresses. Attention to wiring details is paramount, particularly for Triducers where grounding the connector to the depth transducer is mandatory, or for speed sensors without temperature requiring specific terminal bridging. These precautions ensure signal integrity and system longevity. The T912 integrates seamlessly into existing Raymarine architectures, providing a reliable solution for collecting primary data, and is a sound choice for upgrading or expanding an instrument network requiring a dedicated interface for traditional transducers.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Senzor za vlečno sonaro

143,08€

143,08€ ~~162,00€~~

Frequently asked questions

Need help? Contact us

How should the T912 be oriented during installation?

The unit must be mounted vertically, with the cables exiting from the bottom. It is important to note that the mounting template must be inverted relative to the transmitter itself.

What drill bit size is required for the T912 mounting holes?

You will need to drill three 2.5 mm holes to secure the T912. These holes are marked 'B' on the provided mounting template.

What types of screws are used to mount the T912?

The T912 is mounted using the self-tapping screws supplied with the unit.

Is it important not to overtighten the screws when installing the T912?

Yes, it is very important not to overtighten the screws when securing the T912. Excessive tightening could damage the device’s molded housing and compromise its integrity.

How should I connect the transducer cables to the T912?

Transducer cables must be connected following the color code indicated on the unit. It is also essential to sleeve the ground braids to prevent short circuits.

What is the specific connection requirement for a Triducer to the T912?

For a Triducer, the ground braid must be connected to the depth connector and not the speed connector. This is critical to prevent short circuits and ensure proper operation.

What to do if my speed sensor has no temperature sensor?

If your speed sensor does not include a temperature sensor, you must connect the brown and white wires of the speed connector. This ensures proper data interpretation by the transducer.

Should I apply grease to the T912 electrical contacts?

Yes, it is recommended to apply silicone grease to the terminal contacts. This optimizes conductivity and provides additional protection to the electrical connections.

How should I organize the cables near the T912 transducer?

It is advisable to secure and support the cables near the transducer. This helps reduce strain on the connections and maintains a clean and secure installation.

Is the T912 compatible with older transducers?

Yes, the T912 can be used with existing or older transducers. However, it is recommended to carefully check the connections and wiring, particularly for speed transducers without a temperature sensor, to ensure proper connection between the brown and white terminals.

What data does the T912 transmit to Raymarine instruments?

The T912 transmits depth, speed, and temperature data collected from connected transducers. This information is then used by Raymarine instrument systems for display and analysis.