Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 26%

B&G

000-15144-001

Penell per sensor WS300/700

This official B&G wind transducer replacement is designed to restore the accuracy of WS300 wind sensors (wired WS310, wireless WS320) and WS700 (vertical carbon sensors). It is essential for maintaining aerodynamic performance and the reliability of wind angle and speed measurements. Only the wind transducer is included.

Public priceGet pro pricing

44,60€

44,60€ ~~60,48€~~

IVA inclòs Expedició calculada en el moment del pagament.

Estoc baix

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tipus de producte	Wind transducer / vane anemometer
Models compatibles	WS310, WS320, WS700 Series
Compatibilitat amb sensor	WS300/700

Detailed description

El penell per sensor WS300/700 és la peça de recanvi oficial dissenyada per B&G, essencial per al manteniment dels anemòmetres d'última generació. Permet restaurar les prestacions de mesura de vent originals dels sensors B&G compatibles. Aquesta peça és compatible amb la sèrie WS300, destinada a la creuer i a la regata de club, així com amb la sèrie d'altes prestacions WS700.

Peça de recanvi certificada B&G per a una precisió mantinguda

Com a peça d'origen B&G (referència 000-15144-001), aquest penell assegura un ajustament perfecte i preserva la integritat funcional del vostre sensor. La seva compatibilitat s'estén als models amb cable WS310, sense fil WS320, i a tots els sensors verticals de carboni de la gamma WS700. L'ús d'una peça certificada és fonamental per mantenir la fiabilitat i la precisió del vostre sistema de navegació, crucial per a l'autopilot i els instruments de rendiment.

Optimització aerodinàmica i dades de vent fiables

Els sensors B&G WS300 i WS700 han estat sotmesos a més de 500 hores d'assajos en túnel de vent per optimitzar-ne el perfil aerodinàmic, garantint així dades de vent estables i precises. El reemplaçament d'un penell danyat per aquest model original és indispensable per conservar la precisió de mesura d'angle de vent (inferior a 1° per al WS300, ±0.5° per al WS700) i de velocitat (inferior a 0.2 nusos). A diferència de peces genèriques que podrien alterar la dinàmica dels fluxos d'aire, aquest penell assegura que el vostre sistema continuï proporcionant informacions crítiques amb la rigorositat esperada dels equips B&G, superant qualsevol alternativa no certificada en termes de rendiment i integració.

Expert review

Pol CONIN

Responsable digital

« Imprescindible: la penell original per a la precisió dels sensors B&G WS300/700 »

La penell per sensor WS300/700 és una peça de recanvi que sovint es menysprea, però és crítica per a la integritat del sistema de mesura del vent de B&G. Una penell danyada compromet directament la precisió de les dades de vent aparent i real, cosa que té un impacte major en el funcionament de l’autopilot i la fiabilitat dels instruments de navegació. En regata, fins i tot desviacions mínimes, com el +/- 0,5° del WS700, poden influir en les decisions tàctiques i l’estratègia de cursa. En creuer, una mesura fiable és essencial per a la planificació de ruta i l’optimització dels ajustaments de veles. L’ús d’aquesta peça original de B&G és fonamental per mantenir el perfil aerodinàmic precís, resultat de més de 500 hores d’assajos en túnel de vent dels sensors WS300/700. Això garanteix que el sistema continuï proporcionant informacions crítiques amb la rigorositat esperada dels equips B&G, assegurant una integració i un rendiment òptims dins la vostra xarxa NMEA.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Penell per sensor WS300/700

44,60€

44,60€ ~~60,48€~~

Frequently Asked Questions

Need help? Contact us

Is this wind transducer compatible with my B&G WS310 wind sensor?

Yes, this wind transducer is the official replacement part and is therefore fully compatible with the B&G WS310 wired wind sensor.

Can I install this wind transducer / vane anemometer on a wireless B&G WS320 anemometer?

Absolutely. This spare part is designed to be compatible with the B&G WS320 wireless wind sensor, which is part of the WS300 series.

Can this part be used on older B&G wind sensor models?

No, this wind transducer is specifically designed for the B&G WS300 and WS700 wind sensor series. It is not compatible with earlier generations of sensors.

Is this a universal part for all anemometers?

No, this is not a universal part. It is specifically manufactured for B&G models in the WS300 series (including WS310, WS320) and WS700.

What is the difference between this vane anemometer and an unofficial part?

As an original B&G part, it guarantees:

Perfect fit on the sensor.Maintenance of the aerodynamic performance tested in a wind tunnel.Preservation of the measurement accuracy of your navigation system.

What is the main purpose of this product?

This product is a replacement wind vane designed to restore the original performance of a B&G WS300 or WS700 wind sensor whose wind vane has been damaged or lost.

Is this an official B&G spare part?

Yes, this is an OEM-certified part from B&G, with manufacturer reference 000-15144-001.

Why is it important to replace a damaged wind transducer / vane anemometer?

A damaged wind transducer / vane anemometer directly impacts the accuracy of wind angle and speed measurements. Replacing it is crucial for reliable navigation data and proper autopilot operation.

What is included in the packaging?

The product contains only the replacement wind transducer for WS300/700 sensor. Other parts of the sensor, such as the anemometer (cups) or the sensor body, are not included.

How important is the aerodynamic design of this wind transducer?

The design of the WS300/700 sensors is the result of over 500 hours of wind tunnel testing. Using the original wind transducer is essential to maintain this optimized profile and ensure stable and accurate wind data.

What is the exact manufacturer reference for this part?

The manufacturer reference (SKU or Part Number) for this replacement wind transducer is 000-15144-001.

Where is this wind transducer installed?

This wind transducer is installed directly on the B&G WS300 or WS700 wind sensor unit, which is typically mounted at the masthead of the sailboat.

Are specific tools required to install the new wind transducer?

Installation generally does not require special tools. However, it is essential to take all necessary safety precautions to access and work at the masthead.

Do I need to recalibrate my navigation system after changing the wind transducer?

Yes, after replacing the wind transducer, a calibration procedure to align the sensor is highly recommended. This ensures the instrument displays the correct wind direction relative to the boat's heading.

Is the installation complicated?

The part is designed for a direct fit, which simplifies mechanical replacement. The main difficulty lies in safely accessing the sensor, which is located at the masthead.

Does using this part preserve the warranty of my B&G sensor?

Yes, as an official and certified B&G spare part, its use is the only way to ensure the integrity and warranty of your WS300 or WS700 wind sensor.

Is this wind transducer compatible with Simrad wind sensors?

This wind transducer is specifically designed and certified for B&G wind sensors in the WS300 and WS700 series. Its use with products from other brands, even within the same group, is not officially guaranteed by B&G.