Fusible AMI/MIDI - 30 A (2 peces)

An AMI/MIDI fuse is a bolt-on type of fuse designed for protecting high-current electrical circuits. It is commonly used in marine and automotive applications to safeguard cables and equipment against overcurrents.

These BLUE SEA fuses are rated for 30 A (amperes). They are designed to interrupt the circuit if the current exceeds this value, thus protecting your equipment.

This pack includes two (2) 30 A AMI/MIDI fuses.

This fuse is designed for use in 12V or 24V electrical systems.

This fuse has an IP66 protection rating. This means it is protected against powerful water jets and dust, making it suitable for marine environments.

Yes, absolutely. With its IP66 rating, it is designed to withstand water spray and dust, making it ideal for marine applications.

The weight of this pack of two fuses is 0.02 kg.

The primary function of this fuse is to protect the boat's electrical circuits and equipment from damage caused by overcurrent or short circuits. It acts as a deliberate weak point that melts and cuts off the current in case of overload.

AMI/MIDI fuses are typically made of an insulating body (often plastic or ceramic) and a calibrated metallic fuse element that melts in case of overcurrent.

No, a blown fuse has served its protective function and must be replaced with a new fuse of the same amp rating and type.

These fuses are made by BLUE SEA.

No, this fuse is of the AMI/MIDI type and is only compatible with fuse holders specifically designed for AMI or MIDI fuses.

No, this fuse is specifically designed for 12V or 24V systems. Using it in a 48V system could compromise its protective capacity and the safety of the installation.

No, AMI/MIDI and ANL fuses are different types with distinct dimensions and mounting characteristics. It is imperative to use the fuse type specified for your fuse holder and application.

Yes, the AMI/MIDI format is a commonly used standard in marine electrical architectures for protecting high-current circuits.

To install an AMI/MIDI fuse, you must bolt it securely into a compatible fuse holder. Ensure connections are clean and tight to guarantee good electrical contact and prevent overheating. It is recommended to cut power before any manipulation.

Installing an AMI/MIDI fuse typically requires basic tools such as a wrench or an appropriate screwdriver to tighten the connection bolts on the fuse holder.

No, a fuse has no specific installation direction. It can be mounted in any orientation as long as it is properly connected to the fuse holder.

This product is covered by the legal warranty against conformity defects and hidden faults. This warranty covers manufacturing defects in the product.

No, this pack contains only two 30 A AMI/MIDI fuses. Mounting accessories, such as the fuse holder or bolts, are not included and must be purchased separately if required.