Disjuntor de balancí sèrie A Blanc - unipolar 10 A

This circuit breaker is designed to protect marine electrical circuits from damage caused by current overloads and short circuits. It automatically interrupts the current flow when the intensity exceeds 10 amperes or in the event of a short circuit, and can be manually reset.

This circuit breaker is ideal for protecting low to medium current circuits on board, such as cabin lighting, small electronic devices (USB chargers, radios), bilge pumps, or other equipment requiring 10 amp protection.

Yes, this circuit breaker is an excellent resettable alternative to traditional fuses. If it trips due to an overload or short circuit, simply flip the switch to reset the circuit, eliminating the need to replace a blown fuse.

Yes, this circuit breaker is specifically designed by Carling Technologies, INC. for marine environments. Its construction and materials are selected to withstand the harsh conditions encountered on board a vessel, including humidity and vibrations.

Yes, this circuit breaker complies with the European Low Voltage Directive 73/23/EEC and 93/68/EEC. It also meets the EN 60934 product safety specification for equipment circuit breakers and is CE marked, ensuring compliance with European standards.

The CE marking indicates that the product complies with the essential requirements of the applicable European directives regarding safety, public health, and consumer protection. For this circuit breaker, this includes compliance with the Low Voltage Directive.

This circuit breaker is primarily designed and specified for 32-volt DC (direct current) marine applications, which is standard for onboard electrical systems on boats. If you are considering use in alternating current (AC) circuits, it is imperative to verify the detailed manufacturer specifications for this exact model to confirm compatibility with your circuit's AC voltage and current type.

Blue Sea Systems Series A circuit breakers are designed to operate across a wide temperature range, typically from -40°C to +85°C. This ensures reliability in various marine weather conditions.

Designed for the marine environment, this circuit breaker is generally splash-resistant on its front face when properly installed in a panel. However, it is not designed to be submerged or exposed to direct and powerful water jets.

This circuit breaker does not require regular specific maintenance. It is designed to be reliable and maintenance-free. However, it is recommended to ensure that electrical connections remain clean and secure and that there is no visible physical damage.

This 10 A circuit breaker is designed to protect charging circuits and devices connected to the battery, but it is not typically used as the primary protection directly at the output of a high-capacity battery. For protecting battery banks or starting circuits, circuit breakers with higher capacity or battery isolators are often required.

A single-pole circuit breaker, like this model, protects and interrupts the current on a single conductor (usually the positive) of a circuit. A double-pole circuit breaker protects and interrupts the current simultaneously on two conductors (for example, the positive and negative, or the live and neutral in AC), which is necessary to fully isolate a circuit.

When the circuit breaker trips due to an overload or short circuit, the switch lever automatically moves to an intermediate position or the "off" (stop) position. Simply reset it manually by moving the lever to the "on" (run) position after resolving the cause of the trip.

Yes, with its 32 Volts DC rating, this circuit breaker is perfectly suited to protect electrical circuits operating at 12 Volts DC and 24 Volts DC, which are the most common voltages in marine applications.

Blue Sea Systems' A-series circuit breakers, manufactured by Carling Technologies, are typically constructed from robust heat-resistant thermoplastic materials, designed for durability and safety in marine environments.