Disjuntor de connexió ràpida amb botó de reinici únicament - 5 A

The primary function of the Blue Sea 7052-BSS circuit breaker is to protect marine electrical circuits from overcurrent conditions, including overloads and short circuits. It automatically interrupts the current in case of failure, preventing damage to equipment and wiring.

No, the Blue Sea 7052-BSS circuit breaker is a 'reset-only' model. This means it is designed to trip automatically in case of overcurrent and must be reset using its push-button. It does not have a manual switching function to intentionally activate or deactivate the circuit.

This Blue Sea 7052-BSS circuit breaker has a rated current of 5 amperes (5 A). It is designed to protect circuits where the maximum load does not exceed this value.

Compared to a traditional fuse, a circuit breaker offers the advantage of being resettable. In case of an overcurrent, it trips and can be reset with a simple button press once the cause of the problem is resolved, without requiring replacement. This reduces the need to carry spare fuses and simplifies fault management.

This 5 A circuit breaker is ideal for protecting low-power circuits on board boats. It is commonly used for LED lighting, small navigation devices, low-consumption VHF radios, secondary bilge pumps, or other electronic equipment requiring overcurrent protection within this ampere range.

The 'quick connect' refers to the type of circuit breaker terminals, usually 1/4 inch faston tabs. These terminals allow for quick and easy installation and removal of the circuit breaker from the circuit, often without specific tools, using corresponding female connectors. This simplifies wiring and maintenance.

The Blue Sea 7052-BSS circuit breaker is designed for direct current (DC) systems and typically supports a maximum voltage of 32 Volts DC. It is therefore compatible with the most common marine electrical systems of 12V and 24V.

Blue Sea Systems products are designed for marine environments. This circuit breaker is generally resistant to splashes and corrosion. It is suitable for use in panels or protected areas on board, but for precise information on the IP protection rating, it is recommended to consult the manufacturer's detailed technical datasheet.

When the circuit breaker trips due to an overload, the reset push-button will pop out or move outward, visually indicating that the circuit is open. To restore power, simply press the button after identifying and resolving the cause of the trip.

Yes, this 5 amp circuit breaker can replace an existing 5 A fuse in a DC circuit, provided the voltage requirements and connection type are compatible. It offers the advantage of being resettable, avoiding the need to replace the fuse each time it trips.

The exact dimensions of the Blue Sea 7052-BSS circuit breaker are available in the product's technical drawings. It is generally a compact format designed for panel mounting. The product images often include precise dimensional drawings and cutting templates to facilitate installation.

Use appropriately sized wiring for the 5-amp circuit, compliant with marine standards (such as ABYC). The quick-connect terminals typically accept standard insulated female spade connectors (e.g., 1/4 inch) to ensure a secure and reliable connection.

Blue Sea Systems products are generally designed to meet or exceed maritime industry standards, such as those from ABYC (American Boat and Yacht Council) and the USCG (U.S. Coast Guard). The brand is recognized for its equipment’s compliance with safety requirements for marine installations.

Yes, it is mandatory to cut all electrical power to the relevant circuit before installing or removing the circuit breaker. This ensures the installer's safety and prevents any risk of short-circuit or damage to equipment.

No, this circuit breaker is specifically designed to protect against overcurrents (overloads and short circuits). It does not protect against undervoltage (voltage drops) that could affect equipment operation.

Modern Blue Sea Systems thermal circuit breakers are generally designed as 'trip-free'. This means that even if the reset button is held down, the breaker will trip and remain open as long as the overcurrent condition persists, ensuring continuous circuit protection.

No, this circuit breaker replaces both the fuse and its fuse holder. It installs directly into the circuit and does not require an additional fuse holder.

The lifespan of a thermal circuit breaker like the Blue Sea 7052-BSS is typically very long under normal operating conditions. It is designed to withstand numerous tripping and reset cycles. However, frequent tripping or extreme environmental conditions may potentially reduce its longevity.

No, the Blue Sea 7052-BSS circuit breaker is specifically designed for direct current (DC) systems typically found on board boats. It must not be used in alternating current (AC) circuits.

For effective protection, the circuit breaker must be installed as close as possible to the power source of the circuit it protects, or at the entrance of the distribution panel for a specific circuit. This minimizes the length of unprotected wiring in case of a downstream failure.