Fusible ATO / ATC - 15 A

An ATO/ATC fuse is a blade-type fuse commonly used in automotive and marine applications to protect electrical circuits from overloads and short circuits. The terms ATO and ATC refer to interchangeable fuse formats, with ATC being a more modern and often more robust version.

This Blue Sea Systems fuse is a 15 amp (15 A) model. It is designed to protect circuits where the current must not exceed this value.

This 15 A fuse is used to protect electrical equipment and wiring on board a boat or in other 12V/24V applications. It automatically cuts the circuit if the current exceeds 15 amperes, preventing damage to devices or fire hazards caused by overload.

No, an ATO/ATC fuse is a single-use device. Once it has "blown" (i.e., its internal element has melted to interrupt the circuit), it must be replaced with a new fuse of the same amperage.

ATO/ATC fuses have standardized dimensions to fit corresponding fuse holders. While exact dimensions may vary slightly by manufacturer, they typically measure about 19 mm wide, 19 mm high, and 5 mm thick.

Yes, Blue Sea Systems products, including this ATO/ATC fuse, are designed for use in demanding marine environments. They provide reliable protection for boat electrical systems.

Installing an ATO/ATC fuse is straightforward:

Ensure the circuit is powered off before any work.Insert the fuse into a compatible ATO/ATC fuse holder.Make sure the fuse is properly seated in the fuse holder contacts.It is critical to always replace a blown fuse with one of the same amp rating.

This ATO/ATC fuse requires a fuse holder specifically designed for ATO or ATC type fuses. These fuse holders are widely available and recognizable by their flat blade connection slots.

Yes, this Blue Sea Systems ATO/ATC fuse is compatible with 12V and 24V DC electrical systems. It is typically rated for a maximum voltage of 32V DC, making it suitable for most marine and automotive applications.

An ATO/ATC fuse that is blown typically shows a broken or melted internal metal filament visible through the fuse's transparent body. Some fuses may also have a visual indicator.

Yes, it is absolutely crucial to always use a fuse with the amperage recommended for the circuit it protects. Using a fuse with a lower amperage could lead to nuisance tripping, while a fuse with a higher amperage would not adequately protect the circuit, risking equipment damage or fire.

No, this is a 15 A ATO/ATC fuse sold individually. The fuse holder is a separate component that must be purchased if you do not already have a compatible one.

This fuse is manufactured by Blue Sea Systems, a brand known for its high-quality electrical solutions for marine environments.

Standard ATO/ATC fuses like this one are typically fast-blow fuses. They are designed to react quickly to overloads and short circuits to protect sensitive components.

Yes, although Blue Sea Systems specializes in marine electronics, ATO/ATC fuses are industry standards and can be used in any 12V or 24V DC circuit requiring 15 ampere protection, such as automotive or recreational vehicles.

Blue Sea Systems fuses are designed to meet marine and electrical industry standards. They are manufactured to strict specifications to ensure reliable circuit protection.

ATO and ATC fuses are blade-type fuses of similar size and are generally interchangeable. Historically, ATO was the original design, while ATC is a newer version with a more enclosed body for better protection against moisture and dust. This product is labeled "ATO/ATC", indicating compatibility with both fuse holder types.

This ATO/ATC fuse is rated for a maximum voltage of 32V DC, making it compatible with most marine and automotive electrical systems operating at 12V or 24V.

Yes, Blue Sea Systems ATO/ATC fuses are typically made with a transparent plastic body, allowing quick visual inspection of the filament to check if it is blown.

Yes, this Blue Sea Systems fuse is covered by the manufacturer's standard warranty against manufacturing defects.