Deckhand Dimmer - 24V DC 12A - Deckhand Dimmer - 24V DC 12A

Deckhand Dimmer - 24V DC 12A - Dimensioned Drawing

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 13%

Blue Sea Systems

7509-BSS

Variador Deckhand - 24 V CC 12 A

Q: What is the primary function of the Deckhand 7509 dimmer?

The BLUE SEA Deckhand 7509 dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent and halogen bulbs in 24 V DC marine systems. It provides precise lighting management on board.

Q: Which types of lights can be controlled by this dimmer?

This dimmer can control the brightness of:Unregulated LED lightsIncandescent bulbsHalogen bulbs

Q: What is the nominal voltage required for the Deckhand 7509 drive?

The Deckhand 7509 drive requires a nominal voltage of 24 V DC (direct current) to operate correctly.

Q: What is the supported operating voltage range for this variable speed drive?

The Deckhand 7509 variable speed drive can operate within a voltage range from 18 V to 32 V DC.

Q: What is the maximum output current that the drive can handle?

The Deckhand 7509 drive can handle a maximum output current of 12 A.

Q: How does the "bulb saver" function protect the bulbs?

The "bulb saver" function built into the Deckhand 7509 dimmer prevents premature aging of bulbs when the boat's batteries are being charged. This helps extend the lifespan of your bulbs.

Q: How does the overcurrent protection of the autopilot work?

The Deckhand 7509 autopilot has built-in overcurrent protection. If the unit stops working due to an overcurrent, simply correct the excessive load, then hold the autopilot switch down until the circuit flashes to reset it.

Q: Within what temperature range can the Deckhand 7509 drive operate?

The Deckhand 7509 drive is designed to operate across a wide temperature range, from −40°C to 85°C.

Q: What type of control technology is used for intensity variation?

The Deckhand 7509 dimmer uses Pulse Width Modulation (PWM) for light intensity control.

Q: Does the dimmer store the last lighting intensity setting?

Yes, the Deckhand 7509 dimmer is equipped with memory that stores the last lighting intensity setting used.

Le variateur BLUE SEA Deckhand 7509 est un contrôleur numérique d'éclairage 24 V CC de 12 A, optimisé pour les LED non régulées, halogènes et incandescentes. Il se positionne comme une solution polyvalente dans la gamme Deckhand, avec une sortie temporisée et une protection intégrée contre les surintensités. Un interrupteur momentané (ON)-OFF-(ON) est inclus.

Tensió: 24 V

12 V 24 V

Corrent: 12 A

6 A 12 A

Public priceGet pro pricing

122,57€

122,57€ ~~141,60€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tipus d'interfície de control	Interrupteur momentané (ON)-OFF-(ON)
Tipus de control	Modulation de largeur d'impulsion (PWM)
Sistemes d'il·luminació compatibles	LED non régulées, incandescentes, halogènes
Zone Control	Non
Interval de tensió de funcionament	18 à 32
Consum elèctric típic	< 0.05
Tipus d'instal·lació	Montage en surface
Dimensions del producte	82.55 x 88.9 x 50.8
Variador compatible	Oui
Contingut del pack	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Certificacions	E-marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Dimmer Memory Function	Oui
Ignition Protection Standard	ISO 8846, SAE J1171
Illuminated Exit Delay Max Minutes	5
Maximum Output Current	12
Maximum Parasitic Current	<2
Tensió nominal	24
Operating Temperature Range C	-40 à 85
Overcurrent Protection	Oui
Reset Mechanism Type	Manuel (maintenir l'interrupteur enfoncé)

Detailed description

Dissenyat per a sistemes marins de 24 V CC, el variador Deckhand 7509 de BLUE SEA és una solució de gestió d’il·luminació digital. Permet el control precís de la intensitat lluminosa per a LEDs no regulats, bombetes d’incandescència i halògenes. Aquest variador integra una funció de sortida il·luminada amb un retard ajustable d’1 a 5 minuts, que ofereix una seguretat addicional en el desembarcament.

Característiques tècniques i funcionalitats

El Deckhand 7509 disposa d’una memòria per a l’última configuració d’intensitat i admet diversos punts de commutació. La seva funció « bulb saver » protegeix les bombetes contra l’envelliment prematur quan les bateries del vaixell estan en càrrega. Els suports de muntatge desplaçats optimitzen la instal·lació, ja que permeten muntar diversos variadors a prop. Inclou un commutador momentani (ON)-OFF-(ON) per a un ús immediat. Incorpora protecció integrada contra sobreintensitats, rearmable mitjançant un simple accionament de l’interruptor.

Integració i conformitat

Amb una tensió nominal de 24 V CC i un rang de funcionament de 18 V a 32 V, aquest variador gestiona un corrent de sortida màxim de 12 A amb un corrent paràsit inferior a 2 mA. Funciona en un rang de temperatura ampli de −40°C a 85°C i utilitza un control per modulació d’amplada d’impuls (PWM). El variador Deckhand 7509 compleix les normes reglamentàries E-marked, ISO 8846 i SAE J1171 per a la protecció contra l’encesa externa, així com les normes SAE J1455 i SAE J1113. Dins de la gamma Deckhand de BLUE SEA, el model 7509 es posiciona com el variador de 24 V CC de 12 A, amb una capacitat de gestió de càrrega superior al model 7504 (6 A en 24 V CC) i diferenciant-se de les versions de 12 V CC com el 7507 (12 A) o el 7508 (25 A).

Documentation

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 12A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 12A

Payment and security

Your payment information and data are processed securely.

Variador Deckhand - 24 V CC 12 A

122,57€

122,57€ ~~141,60€~~

Complete your installation with

Complementary equipment

Blue Sea Systems

Amperímetre M2 DC

Ref : 1832-BSS

419,60€

419,60€ ~~466,08€~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Mini amperímetre OLED - Màx. 100A

Ref : 1732B-BSS

95,88€

95,88€ ~~116,82€~~

Mini OLED DC Voltmeter - Yellow - Mini OLED DC Voltmeter - Yellow

Blue Sea Systems

Mini voltímetre CC OLED - Groc

Ref : 1733-BSS

52,97€

52,97€ ~~64,44€~~

M2 DC Multimeter with SoC - M2 DC Multimeter with SoC

Blue Sea Systems

Multímetre M2 DC amb SoC

Ref : 1830-BSS

408,30€

408,30€ ~~489,38€~~

Coupe-batterie à distance ML-RBS avec commande manuelle - 24V DC 500A - ML-RBS Remote Battery Switch with Manual Control - 24V DC 500A

Coupe-batterie à distance ML-RBS avec commande manuelle - 24V DC 500A - Wiring Diagram

Blue Sea Systems

Tallacor de bateria a distància ML-RBS amb comandament manual - 24 V CC 500 A

Ref : 7702B-BSS

238,30€

238,30€ ~~297,48€~~

Sélecteur de batterie e-Series 4 positions - Mounting Diagram

Blue Sea Systems

Selector de bateria e-Series de 4 posicions

Ref : 9001EB-BSS

63,31€

63,31€ ~~70,80€~~

e-Series Selector 3 Position Battery Switch with AFD - e-Series Selector 3 Position Battery Switch with AFD

e-Series Selector 3 Position Battery Switch with AFD - Dimensioned Drawing

Blue Sea Systems

Selector de bateria tallacircuits e-Series de 3 posicions amb AFD

Ref : 11001-BSS

72,24€

72,24€ ~~80,34€~~

12/24V DC Dual USB Charger 4.8A with Intelligent Device Recognition - 12/24V DC Dual USB Charger 4.8A with Intelligent Device Recognition

Blue Sea Systems

Carregador doble USB 12/24 V CC 4,8 A amb reconeixement intel·ligent dels dispositius

Ref : 1045-BSS

50,22€

50,22€ ~~59,10€~~

Panneau de disjoncteur étanche WeatherDeck® 12V DC - Gris 8 positions - WeatherDeck® 12V DC Waterproof Circuit Breaker Panel - Gray 8 Positions

Blue Sea Systems

Tauler de disjuntors estanc WeatherDeck® 12 V CC - Gris 8 posicions

Ref : 4378-BSS

218,86€

218,86€ ~~258,24€~~

Frequently Asked Questions

Need help? Contact us

What is the primary function of the Deckhand 7509 dimmer?

The BLUE SEA Deckhand 7509 dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent and halogen bulbs in 24 V DC marine systems. It provides precise lighting management on board.

Which types of lights can be controlled by this dimmer?

This dimmer can control the brightness of:

Unregulated LED lightsIncandescent bulbsHalogen bulbs

What is the nominal voltage required for the Deckhand 7509 drive?

The Deckhand 7509 drive requires a nominal voltage of 24 V DC (direct current) to operate correctly.

What is the supported operating voltage range for this variable speed drive?

The Deckhand 7509 variable speed drive can operate within a voltage range from 18 V to 32 V DC.

What is the maximum output current that the drive can handle?

The Deckhand 7509 drive can handle a maximum output current of 12 A.

How does the "bulb saver" function protect the bulbs?

The "bulb saver" function built into the Deckhand 7509 dimmer prevents premature aging of bulbs when the boat's batteries are being charged. This helps extend the lifespan of your bulbs.

How does the overcurrent protection of the autopilot work?

The Deckhand 7509 autopilot has built-in overcurrent protection. If the unit stops working due to an overcurrent, simply correct the excessive load, then hold the autopilot switch down until the circuit flashes to reset it.

Within what temperature range can the Deckhand 7509 drive operate?

The Deckhand 7509 drive is designed to operate across a wide temperature range, from −40°C to 85°C.

What type of control technology is used for intensity variation?

The Deckhand 7509 dimmer uses Pulse Width Modulation (PWM) for light intensity control.

Does the dimmer store the last lighting intensity setting?

Yes, the Deckhand 7509 dimmer is equipped with memory that stores the last lighting intensity setting used.

What is the current draw of the drive when in standby (parasitic current)?

The Deckhand 7509 drive's maximum parasitic current is less than 2 mA, indicating very low energy consumption in standby mode.

How can I activate and set the illuminated output mode?

To activate the illuminated output mode and set the delay:

1-minute delay: Hold the switch in the upper (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash, and the lights will remain on for 1 minute.

2- to 5-minute delay: Hold the switch in the upper (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

Is a switch provided with the Deckhand 7509 drive?

Yes, the Deckhand 7509 drive is supplied with a momentary (ON)-OFF-(ON) type switch.

Do the offset mounting brackets provide a specific advantage during installation?

Yes, the Deckhand 7509 offset mounting brackets are designed to allow multiple actuators to be mounted close to one another, thus optimizing installation space.

What should I do if the inverter stops working due to an overcurrent?

If the inverter stops working due to an overcurrent, you must first correct the excessive load. Then, hold down the inverter's switch until the circuit flashes to reset the built-in protection.

Is it possible to control the variator from multiple locations on the boat?

Yes, the Deckhand 7509 variator supports multiple switching locations, allowing you to control it from different points on your boat.

Is the Deckhand 7509 variable speed drive suitable for 12 V DC electrical systems?

No, the Deckhand 7509 variable speed drive is specifically designed for 24 V DC marine electrical systems and operates within a range of 18 V to 32 V. It is not compatible with 12 V DC systems.

Can this dimmer be used with regulated LEDs?

No, the Deckhand 7509 dimmer is designed to digitally control the intensity of non-regulated LEDs, as well as incandescent and halogen bulbs.

Which safety and compliance standards does this product meet?

The Deckhand 7509 variable thruster complies with several regulatory standards, including:

E-markedISO 8846 (external ignition protection)SAE J1171 (external ignition protection)SAE J1455SAE J1113

Is the Deckhand 7509 thruster certified for protection against external ignition?

Yes, the Deckhand 7509 thruster complies with the external ignition protection requirements of ISO 8846 and SAE J1171 standards, ensuring safety in marine environments.