Cable d’alimentació/dades

Yes, as its name indicates, this Garmin 010-11824-00 cable serves a dual function: it supplies the electrical power required for the GPS receiver to operate and simultaneously transmits navigation data (position, speed, heading) to other onboard equipment such as chartplotters or multifunction displays.

Yes, this Garmin-origin cable is designed to withstand marine environments. It is made with materials resistant to moisture, UV, and salt corrosion. However, for optimal protection, it is recommended to protect electrical connections with heat-shrink tubing or waterproof connectors, and to avoid prolonged immersion of the cable.

Yes, you can use this cable solely for powering the GPS receiver. Simply connect the red and black wires to a 12V/24V power source and leave the data wire unconnected. The GPS will operate normally but will not transmit navigation data to other instruments. This setup is useful if you are using the GPS as a standalone receiver.

The Garmin cable 010-11824-00 is supplied bare, with wires stripped at one end (for connection to power and data) and a specific connector at the other end for plugging into the GPS receiver. It does not include additional connectors, terminal blocks, or heat-shrink tubing. You will need to provide your own waterproof connection materials for installation.

No, this cable is designed for power supply and real-time navigation data transmission, but it does not support firmware updates. To update the software on your Garmin GPS receiver, you must use a specific programming cable (often a USB cable) or an SD card, depending on the model. Refer to your device’s manual for update procedures.