Telecomanda del pilot automàtic Reactor™

The Garmin Reactor™ remote control is designed to provide remote operation of your Garmin Reactor™ autopilot system. It allows helms to maintain heading and autopilot functions control from any point on the boat.

The Reactor™ remote control allows you to control the autopilot up to a range of 14 meters from the main console of your system.

The remote control features a 30.2 mm diameter transflective MIP (memory-in-pixel) screen with a resolution of 240 x 240 pixels. This screen ensures optimal readability even in full sunlight.

The remote is made of glass-filled nylon. Its ergonomic and robust design ensures durability compliant with marine requirements.

The remote control has an IPX7 waterproof rating. This means it can withstand accidental immersion up to 1 meter depth for 30 minutes.

The remote control dimensions are 152 mm (width) x 52 mm (height) x 32 mm (depth). Its weight is 109 g without batteries.

The remote control requires two AA batteries. These batteries are not included with the product. For best performance, it is recommended to use lithium batteries.

With typical use, the remote control provides a battery life of approximately 240 hours with two AA batteries.

To install the batteries:

Turn the D-ring counterclockwise and pull to remove the cover.Insert two AA batteries, observing the correct polarity.Replace the battery cover and turn the D-ring clockwise.

The remote control is designed to be used with Garmin Reactor™ autopilot systems. It must be paired with a control head, such as a GHC™ 20, GHC 50, or a chartplotter compatible with the same NMEA 2000® network as the autopilot system.

To pair the remote control with a control head:

On the control head, select Menu > Configuration > Remote > Search remote. "Enabled" appears on the screen.Use the remote to select the appropriate option:If you have a GHC 20, select the Menu key > Pair with GHC 20.If you have a GHC 50, select the Menu key > Pair with GHC 50.The control head will beep and display a confirmation message.Select Connect.

To pair the wireless remote control with a chartplotter:

On the chartplotter, select Settings > Communications > Wireless Devices > Wireless Remote Controls > Autopilot Remote. If necessary, select Enable. Select New Connection. On the remote, select the Menu key > Pair with MFD. The chartplotter emits a beep and displays a confirmation message. On the chartplotter, select Yes to complete the pairing process.

Yes, the remote control includes gesture control functions. You can engage or adjust the heading by simply pointing the remote in the desired direction after calibrating the integrated compass.

To calibrate the compass of the remote control:

Select the Menu button > Compass calibration. Follow the on-screen instructions. It is recommended to calibrate the compass outdoors, away from objects that influence magnetic fields such as vehicles or buildings.

Yes, the action buttons (1 to 3) on the remote control are pre-programmed with default or custom actions, but you can change the functions assigned to them via the connected control head or chartplotter.

Once the autopilot is engaged:

To adjust the heading by one degree to port or starboard, press the left or right arrow key.To adjust the heading in predefined tacking increments (default 10 degrees), press the double left or double right arrow key. Hold to apply cumulative adjustments.To steer the rudder to port or starboard, hold the left or right arrow key and release.

Yes, sailboat-specific functions and models are available for programmable buttons when the remote is connected to an autopilot on a sailboat. This includes activating a Wind Hold function and the ability to tack or jibe.

To install the bracket:

Use the bracket as a template to mark the hole locations on the mounting surface.Set the bracket aside (do not drill through the bracket).Using a 3 mm (1/8 in) drill bit, drill pilot holes.Using the included screws, secure the bracket to the mounting surface.

By pressing the Menu button, you can access the following settings:

Backlight: Adjusts the screen backlight level.Beeper: Sets whether and when audible sounds are used.Compass calibration: Calibrates the compass for the gesture control function.Units: Sets the measurement units.Restore default settings: Restores the remote control to factory settings.About: Displays information about the remote control.

Yes, the standard limited warranty from Garmin applies to this accessory.