Cable de connexió OPC-1540

The OPC-1540 cable is used to connect remote accessories, such as the HM-162E control microphone, to your Icom marine VHF radio. It transmits power and communication signals.

This connection cable is exactly 6 meters long, providing good flexibility to connect the radio base to the helm station.

The OPC-1540 cable is an official accessory specifically designed for use with Icom marine VHF installations.

This cable is ideal and specifically designed to connect the Icom HM-162E remote control microphone to your main VHF base.

Yes, the system is modular. You can add one or two additional extension cables of model OPC-1541 (each also 6 meters long) to increase the distance of your installation.

By combining the base OPC-1540 cable with two OPC-1541 extensions, you can achieve a maximum total offset of 18 meters.

Yes, the OPC-1540 cable harness includes the necessary wires to directly connect a waterproof external speaker for sound on your deck or cockpit.

For the audio connection, the wiring is straightforward:

The yellow wire corresponds to the audio hot lead.The black wire corresponds to the audio ground.

Yes, it is designed for marine environments. It connects the radio base located inside the cabin to an external helm station exposed to the elements.

Yes, the cable provides reliable and simultaneous transmission of communication signals (audio and control) as well as the electrical power supply to the remote accessory.

A standard marine electrician's toolkit is sufficient. You will need wire strippers and waterproof connectors (or heat-shrink tubing) to securely connect the speaker to the audio wires and prevent corrosion.

The modular design of the Icom OPC-1540 connection cable provides several key advantages for marine VHF installations, particularly in complex setups:

Increased mounting flexibility: This cable is specifically designed to offer high flexibility when installing remote accessories, such as the HM-162E control microphone. It allows you to position these elements optimally on your boat, even when the main transceiver is located far away.Extended remote distance: Unlike standard wiring, which is often limited in length, the OPC-1540 can be paired with one or two OPC-1541 extension cables (each 6 meters long). This allows you to achieve a maximum remote distance of 18 meters, making it possible to install a communication station at a significant distance from the radio base.Complex configuration adaptation: This modular architecture is ideal for vessels requiring a remote pilot station or external communication setup, ensuring reliable transmission of communication and power signals over longer distances.Icom system integration and scalability: The cable fits into a logic of integration and scalability of Icom systems, facilitating a clean and efficient installation for communications and connection of external speakers.

No, it is strongly recommended to use the official Icom OPC-1540 cable. It has the specific connectors, the correct number of pins, and adequate shielding to ensure proper VHF operation.

You can connect a maximum of two OPC-1541 extension cables in sequence to your OPC-1540 cable to ensure the integrity of the audio signal and data.

No, connecting an external speaker amplifies the receive audio on deck, working in synergy with your remote control station for better audibility.

This is a 6-meter black cord with the Icom OPC-1540 reference. It is distinguished by its specific connectors for VHF and microphone, as well as the presence of two bare wires (yellow and black) dedicated to audio.

Yes, this cable transmits all control signals. It allows changing channels, adjusting volume, or using ASN/DSC functions directly from the HM-162E remote microphone.

Yes, as a marine VHF installation accessory from Icom, its jacket and connectors are designed to withstand harsh conditions and the salty air of the marine environment.

The system is optimized for 5W RMS (10W Peak) speakers. Using a significantly more powerful speaker is not recommended, as the VHF's internal amplifier will not deliver the necessary power to drive it properly.