Faisceau alimentation vehicule Thales Iridium Certus

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 2%

Iridium

S24597

Cable vehicle Power Harness 20FT

Power Harness 20 ft vehicle cable for technical connection to marine electronics, suitable for Iridium installations. Length specified: 20 ft.

Public priceGet pro pricing

285,32€

285,32€ ~~291,43€~~

IVA inclòs Expedició calculada en el moment del pagament.

Estoc baix

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Segment de cable	Câbles constructeur marine
Tipus de cable	Câble alimentation
Compatibility Scope	Référence exacte de l’équipement à vérifier avant commande
Marca compatible	Iridium
Environment	Installation nautique
Installation Advice	prévoir un cheminement propre, sans tension mécanique sur les fiches
Installation Check	la référence constructeur, le connecteur et la longueur nécessaire à bord
Length	20 ft
Length Ft	20
Product Usage	Antenne et communications
Signal Type	Power
Skysat Usage	raccordement technique pour électronique marine

Detailed description

Cable vehicle Power Harness 20FT és un cable d’alimentació dissenyat per a una funció de connexió tècnica per a electrònica marina. Completa una instal·lació existent o substitueix un cable gastat mantenint una referència adequada per a l’electrònica marina.

Aquesta fitxa pertany a la família Cables fabricant marina. Longitud indicada: 20 ft. Senyal o protocol: Power. La compatibilitat s’ha de confirmar amb l’equipament Iridium exacte abans de realitzar la comanda.

Per a una instal·lació fiable, cal preveure un recorregut net, sense tensions mecàniques sobre els connectors. També cal verificar la referència del fabricant, el connector i la longitud necessària a bord abans de tancar els passos de cable.

Expert review

Pol CONIN

Responsable digital

« Skysat Review - Power Harness 20FT Vehicle Cable »

Skysat advice: choose this cable based on the equipment to be connected, not just the available length. Check the connector, pinout, and actual routing inside the boat before ordering.

When the cable runs through the mast, roof, or wet area, leave a service loop, protect the connections, and avoid intermediate splices. This prevents many difficult diagnostics after installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Cable vehicle Power Harness 20FT

285,32€

285,32€ ~~291,43€~~

Frequently Asked Questions

Need help? Contact us

What is the Câble véhicule Power Harness 20FT used for?

The Câble véhicule Power Harness 20FT is used to provide the following function: technical connection for marine electronics. It is intended for installations where you want to maintain a reference suitable for the equipment rather than an approximate cable.

Which equipment is it compatible with?

Compatibility depends on the exact Iridium device reference. Before ordering, check the connector, pinout, and the documentation of the equipment to be connected.

What needs to be checked before installation?

Check the manufacturer reference, the connector, and the required length on board. Also plan the actual cable route, bulkhead penetrations, and service margins at the ends.

How to install it cleanly on board?

Plan a clean routing path with no mechanical stress on the connectors. Connectors must not be under tension, and exposed joints must be protected from moisture.

Does the indicated length always suffice?

The indicated length is 20 ft. Measure the actual passage in the boat before ordering, adding the necessary margin for curves, drops, and service loops.

Why choose an OEM part?

An OEM part reduces the risk of wiring errors, connector mismatches, or signal level issues. This is particularly critical for Iridium links, radar, antenna, marine data bus, or other marine electronics connections.