Cable elèctric 16A - 15 metres 2,5 mm²

This cable is designed to provide a safe and reliable shore power connection. It powers your boat's 230 V system during port stays, allowing onboard equipment to run and battery banks to recharge.

This Mastervolt shore power cable is 15 metres long, an ideal length to easily connect your boat to the marina power pedestal in most cases.

This model is specifically designed to support an amperage of 16A. It offers an excellent compromise between maneuverability and power for standard onboard energy needs.

The wire has a 2.5 mm² cross-section. This gauge is critical as it ensures maximum conductivity while limiting voltage drop over its 15-meter length, guaranteeing both safety and efficiency.

Yes, it is compatible with grounded two-pole sockets or three-pole CEE sockets, which are the standard in most harbors and marinas.

Yes, to simplify storage on board and protect it from the marine environment, this power cable is supplied in a practical carrying case.

The storage case measures 36 x 46 x 11 cm (Height x Width x Depth), allowing it to be stored neatly in your boat's lockers.

The choice depends on the maximum load of your electrical installation. The 16A version is ideal for standard needs. For heavier installations that consume a lot of power, a 32A model will be necessary.

For vessels with high power demands, Mastervolt recommends using multiple parallel shore power connections or opting for a 32A installation.

Absolutely. By connecting your boat to the 230 V shore power, this cable powers your shore chargers to efficiently recharge all your battery banks.

Yes, unlike 32A models which are heavier and stiffer, this 16A version offers an excellent balance between maneuverability and power, making dockside connections much simpler.

This cable is specifically designed for the 230 V system, which corresponds to the standard voltage supplied by shore power outlets for vessel power supply.

Yes, Mastervolt equipment is professional-grade and designed for durability, safety, and ease of use in demanding marine environments.

Yes, when connecting your boat to the dock, the cable powers your entire 230 V system, allowing you to run your onboard appliances directly (refrigerator, water heater, power outlets).

Mastervolt prioritizes safety. Thanks to its robust design and 2.5 mm² cross-section, this cable ensures a high-quality connection with reliability and efficiency as top priorities.

Generally no, as it is designed to be compatible with standard three-pole CEE outlets. However, if the power outlet uses a very specific or obsolete format, an adapter may be necessary.

Yes, it is designed to connect the shore power outlet to your boat during outdoor harbor stops. However, it is advisable to store it back in its case once sailing resumes to protect it from the elements.

While physically possible with the correct connectors, it is preferable to use a single continuous cable to avoid voltage drops and ensure perfect connection safety and watertightness.

Yes, the cable is supplied with its carrying case as standard, highlighting Mastervolt's careful and professional packaging to make storage easier.

Yes, this cable powers your boat's 230 V system universally. It is therefore fully compatible with battery chargers of all brands, though it is ideal for Mastervolt systems.