Distribuïdor de càrrega BI702 S

The BI702 S includes a compensation diode, unlike the standard BI702. This diode automatically compensates for the ~0.7 V voltage drop inherent to diode-based technology. Using the sense terminal, the charger or alternator output voltage is automatically adjusted to ensure optimal battery charging. The standard BI702 requires manual adjustment of the source voltage to compensate for this loss.

The Mastervolt BI702 S charge distributor can handle a maximum input current of 70 A from an alternator and 50 A from a battery charger. It is designed to distribute this current to two independent battery banks.

Yes, the BI702 S charge distributor can be used with any compatible battery charger or alternator, provided the charging source is suitable for use with a diode-based distributor. However, to benefit from the automatic voltage drop compensation function, the source must be equipped with a sense terminal. Mastervolt Mass chargers and Alpha Pro regulators include this feature.

Yes, the BI702 S is designed to be used with an alternator. It can support up to 70 A in alternator output. For automatic compensation of voltage drop, the alternator must be equipped with a sense terminal to be connected to the S terminal of the splitter. Check your alternator manual to verify this compatibility.

No, the Mastervolt BI702 S charge distributor is not designed to be used with a charger/inverter combi unit. It is intended solely for installation between a charging source (alternator or dedicated charger) and the batteries. For combi systems, other solutions such as the Charge Mate are recommended.

The BI702 S has two battery outputs, allowing you to charge two independent battery banks. Each output can power one or more batteries connected in parallel, provided you respect the device's maximum current capacity (70 A total).

To install the BI702 S, first ensure the charging source is powered off. Mount the distributor in a well-ventilated area, preferably on a flat metal surface with the cooling fins oriented vertically. Connect the positive terminal of the charging source to terminal A (the longer one). Attach the positive terminals of the batteries to terminals 1 and 2. For S models, link the sensing terminal (sense) of the source to terminal S (the thinnest one). Finally, connect the negative terminals of the source and batteries to a common ground point.

The BI702 S must be installed as close as possible to the charging source (alternator or charger) and the batteries. As it can heat up during operation (up to 120 °C), install it in a well-ventilated area. It is recommended to mount it on a flat metal surface to improve heat dissipation, with the cooling fins oriented vertically.

Use cables with a cross-section sufficient to handle the maximum current (70 A). Connections must be made using threaded screw terminals with nuts and locking washers. Ensure you use the correct crimp terminals and tighten the nuts firmly without over-tightening. Keep cable lengths as short as possible to minimize losses.

Yes, the BI702 S is designed to resist corrosion. It is built with a housing made entirely of corrosion-resistant material and an aluminum heat sink. The electronic components are encapsulated in synthetic materials, making it suitable for demanding marine environments.

The Mastervolt BI702 S load distributor measures 157 mm in height, 140 mm in width, and 80 mm in depth (6.2 x 5.5 x 3.1 inches). It weighs 0.58 kg (1.3 lbs), making it compact and easy to integrate into tight spaces.

Yes, the BI702 S charge distributor is generally supplied with an installation and user manual. This manual details mounting steps, wiring diagrams, and safety instructions. If you need an additional copy, you can download it from the Mastervolt website.

To enable automatic compensation, your alternator must be equipped with a sensing terminal (sense). Check your alternator's manual to confirm its presence. If your alternator does not have this terminal, you can still use the BI702 S, but you will need to manually increase the alternator's output voltage by approximately 0.7 V to compensate for the voltage drop.

For optimal cooling, it is strongly recommended to install the BI702 S with the cooling fins oriented vertically. This allows for better air circulation and efficient heat dissipation. Avoid installing it upside down or in a position that would obstruct ventilation.

The typical voltage drop of the BI702 S is approximately 0.7 V, which is standard for diode splitters. Thanks to the integrated compensation diode (terminal S), this drop can be automatically compensated if the charging source is equipped with a sensing terminal.

Yes, the Mastervolt BI702 S charge distributor is warranted by the manufacturer. The standard warranty is two years from the date of purchase, provided installation complies with the manual instructions. Any non-compliant use or modification may void the warranty.

Some heating is normal during operation, especially at high currents (up to 120 °C). However, if the temperature seems excessive, check that the device is installed in a ventilated area with vertical fins. Ensure that the connections are tight and that the cables have sufficient cross-section. If the issue persists, contact customer service.