Cable d'extensió NMEA 2000 de 1,8 m

This Navico NMEA 2000 extension cable is 1.8 metres long.

This cable is fitted with 5-pin micro-C connectors, which are the marine industry standard for NMEA2000 networks. They provide a secure and watertight connection.

Yes, Navico's design and manufacturing quality ensure a secure and watertight connection, essential for withstanding harsh marine conditions such as humidity and water spray.

It is used to reliably connect various marine equipment such as instruments, sensors, displays, or to extend the backbone of your existing NMEA2000 network.

Using a certified Navico cable, unlike uncertified generic cables, ensures signal integrity throughout its length. This prevents common issues such as voltage drops or data corruption, which can cause intermittent failures in critical instruments.

Yes, with its 1.8-metre length, it offers good flexibility for medium-distance connections. It allows easy adaptation to various vessel configurations, whether for device connections or backbone extension.

The product reference (SKU) for this 1.8m NMEA 2000 extension cable is 000-0127-53.

Yes, this cable is designed for seamless interoperability with all brands’ equipment compliant with the NMEA2000 standard. This includes brands such as Simrad, Lowrance, B&G, Garmin, or Raymarine.

No, this cable is specifically designed for the NMEA2000 network. NMEA2000 and NMEA0183 standards differ and require separate cables and interfaces. A converter would be necessary to link the two types of networks.

Yes, absolutely. As a Navico product, this cable is fully compatible and optimized to work with equipment from Navico brands such as Simrad, Lowrance, and B&G, as well as other brands compliant with the NMEA 2000 standard.

Yes, this cable is designed to integrate seamlessly into an existing NMEA2000 network, whether adding a new device or extending the backbone. It strictly complies with NMEA2000 standards for guaranteed compatibility.

This cable allows the transmission of all standard NMEA 2000 network data, including GPS position, speed, depth, temperature, wind, engine, and many other data types, between the various devices connected to the network.

Yes, if your battery management system is NMEA2000-compatible and has a Micro-C port, this cable can be used to connect it to the network to share battery data with other displays or instruments.

This 1.8m cable can be used as a "drop cable" to connect a multifunction display (MFD) directly to a T-connector on the backbone of your NMEA 2000 network.

Yes, this cable can be used to join two segments of the main backbone (backbone) of your NMEA 2000 network, providing greater flexibility during installation or extension of your infrastructure.

No, installing this NMEA 2000 cable is generally straightforward and does not require special tools. The micro-C connectors are designed to be hand-tightened, ensuring a secure and watertight connection.

Micro-C connectors are designed to be waterproof. To ensure optimal waterproofing, make sure to screw and tighten the connectors manually until they are firmly in place, without over-tightening.

Yes, the NMEA 2000 standard specifies length limits for the backbone and drop cables to ensure signal integrity. For a backbone, the maximum length is typically 100 meters, and for drop cables, it is 6 meters. This 1.8m cable is well within the limits for a drop cable.

Yes, this 1.8m cable is ideal for connecting devices such as an external GPS antenna, a depth transducer, or any other NMEA 2000-compatible sensor to your network backbone, functioning as a drop cable.

Yes, a functional NMEA 2000 network requires two line terminators (terminators), one at each end of the backbone. This extension cable is not a terminator but a component of the network wiring.