Allargador de 4 m per sonda HyperVision

The Raymarine A80562 extension cable is designed to extend the reach of your HyperVision transducer cable. It provides greater flexibility when installing the transducer on your vessel, especially when the multifunction display (MFD) is located far from the ideal transducer position.

This Raymarine A80562 extension cable is 4 meters long.

Yes, the A80562 extension cable is an original Raymarine accessory, specifically designed for HyperVision sonar transducers.

Yes, like all Raymarine accessories, this extension is made with marine-grade materials to ensure durability and resistance to harsh marine conditions, including humidity and temperature variations.

No, this extension is specifically designed by Raymarine to maintain the signal integrity of HyperVision transducers. It minimizes the risk of signal degradation or interference, ensuring optimal sonar image quality.

The part number (SKU) of this extension is A80562.

Yes, the Raymarine A80562 extension is designed with shielding and proper insulation to protect the HyperVision transducer signal from electromagnetic interference, ensuring clear and stable data transmission.

Using a specific Raymarine extension cable such as the A80562 ensures perfect compatibility with the frequencies and imaging technologies of HyperVision transducers. This minimizes the risks of signal degradation, interference, or connection issues, unlike generic cables which could compromise sonar image quality.

Yes, the A80562 extension cable is designed to be sufficiently flexible to facilitate routing through complex cable passages and confined spaces on board a vessel, while maintaining its robustness.

This extension is specifically compatible with transducers from the Raymarine HyperVision range, such as the HV-100 transducer.

Yes, the HyperVision transducers integrate DownVision, SideVision, and RealVision 3D technologies. Since this extension is designed for HyperVision transducers, it ensures data transmission for all these technologies.

No, the A80562 extension is specifically designed for Raymarine HyperVision transducers and uses connectors and signal specifications tailored to this technology. It is not compatible with traditional CHIRP transducers or other non-HyperVision transducer types.

Yes, the A80562 extension cable is fully compatible with the Raymarine HV-100 transducer, which is part of the HyperVision series.

No, this extension is specifically designed for Raymarine's HyperVision technology. It is not compatible with transducers from earlier generations of Raymarine that do not use HyperVision technology and their specific connectors.

Yes, Raymarine Axiom systems are designed to work with HyperVision transducers. Therefore, the A80562 extension is fully compatible with Axiom systems when used with a HyperVision transducer.

The A80562 extension simply connects between the HyperVision transducer cable and the dedicated transducer port on your Raymarine multifunction display (MFD). The connectors are "plug-and-play" type and do not require special tools for connection.

During installation, ensure connectors are tightened properly to guarantee a watertight and secure connection. Route the cable to avoid pinching, excessive twisting, and sources of electrical interference, and secure it firmly to prevent damage from vibrations or boat movement.