Cable adaptateur Raymarine A80559 sonde CPT-S/DVS vers Element HV

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 7%

Raymarine

A80559

Cable d’adaptació sonda CPT-S/DVS (9 pins) a Element HV (15 pins)

Le câble d'adaptation Raymarine A80559 permet de connecter une sonde CPT-S ou CPT-DVS (9-pin) aux écrans multifonctions Element HV (15-pin), assurant la compatibilité et la réutilisation de vos transducteurs existants. Il offre une solution économique pour les mises à niveau de systèmes de navigation. Le produit inclut uniquement le câble adaptateur.

Public priceGet pro pricing

99,65€

99,65€ ~~108,00€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tipus de connector	9 broches (sonde CPT-S/DVS) / 15 broches (Element HV)
Tipus de cable	Câble adaptateur
Xarxa compatible	Sonar CHIRP
Xarxa amb fil	Raymarine Sonar propriétaire
Tensió de funcionament	12V CC
Temperatura de funcionament	-10 à +50°C
Temperatura d'emmagatzematge	-20 à +70°C
Grau de protecció IP	IPX7
Certificacions	CE
Tipus de producte	Câble adaptateur
Models compatibles	Sondes Raymarine CPT-S/DVS (9 broches); Écrans multifonctions Raymarine Element HV (15 broches)

Detailed description

El cable d’adaptació Raymarine A80559 està dissenyat per garantir la compatibilitat entre les sondes CHIRP tradicionals CPT-S/DVS (connexió de 9 pins) i les pantalles multifunció de la sèrie Element HV (connexió de 15 pins). Aquesta solució tècnica permet als usuaris de la marca reutilitzar els seus transductors existents en una actualització del seu sistema de navegació, optimitzant així la inversió material.

Connectivitat i integració dels sistemes Raymarine

La sèrie Element HV de Raymarine, reconeguda per les seves capacitats sonar HyperVision, utilitza connectors de sonda específics de 15 broques. Paral·lelament, les sondes CPT-S i CPT-DVS, sovint associades a generacions anteriors de pantalles Dragonfly o altres MFD Raymarine, empren un connector de 9 broques. El cable A80559 estableix un enllaç elèctric i de dades entre aquests dos estàndards, permetent que les pantalles Element HV interpretin els senyals sonar dels transductors CPT-S/DVS. Les sondes CPT-S, com els models travessers de plàstic o bronze (E70339, A80446, E70340, A80447, E70341, A80448, A80545), són transductors Raymarine reconeguts per la seva robustesa i fiabilitat marina.

Posicionament tècnic i avantatge per a l’usuari

Aquest cable adaptador Raymarine A80559 es posiciona com un component d’integració estratègic. Evita el reemplaçament sistemàtic d’una sonda CPT-S/DVS funcional en adquirir una pantalla Element HV, reduint així els costos i la complexitat d’instal·lació (forats nous a la quilla o instal·lació de nous suports d’esquena). Tot i que les pantalles Element HV estan optimitzades per a sondes HyperVision (no incloses), l’ús d’una sonda CPT-S/DVS mitjançant aquest cable ofereix una capacitat sonar CHIRP tradicional fiable. Aquesta aproximació difereix d’una solució completa Element HV + sonda HyperVision, ja que proporciona una via d’actualització més progressiva i econòmica, especialment adequada per a navegants que desitgin conservar part del seu equip existent mentre aprofiten els avenços de les noves plataformes d’exhibició.

Documentation

Type	Nom
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)

Expert review

Pol CONIN

Responsable digital

« Integration of CPT-S/DVS transducers with Raymarine Element HV displays »

The Raymarine A80559 adapter cable is a pragmatic solution for recreational boaters considering an upgrade to the Element HV series while retaining their existing CPT-S or CPT-DVS transducer. Its practical value lies in reusing an expensive and often complex component to replace, such as a through-hull transducer, thereby avoiding additional hull work. It primarily targets boat owners equipped with Raymarine transducers from previous generations who do not wish to immediately invest in a new HyperVision transducer.

Installing this cable is straightforward: it is a plug-and-play connection between the 9-pin connector of the CPT-S/DVS transducer and the 15-pin port of the Element HV display. This significantly simplifies integration and reduces vessel downtime. This approach differs from a complete solution with a dedicated HyperVision transducer by offering an economical alternative. It is particularly relevant if the sonar capabilities of the CPT-S/DVS transducer are deemed sufficient for the user's primary needs, or if the budget does not allow for a full replacement.

It is crucial to understand the limitations of this adapter: it ensures physical and electrical compatibility but does not transform a CPT-S transducer into a HyperVision transducer. To fully leverage the 1.2 MHz frequencies and ultra-high-resolution imaging performance of HyperVision, a dedicated transducer for this technology is essential. The A80559 cable is therefore a functional bridge to traditional CHIRP technology, serving as a transitional solution or a useful complement rather than a replacement for the native capabilities of Element HV displays.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Cable d’adaptació sonda CPT-S/DVS (9 pins) a Element HV (15 pins)

99,65€

99,65€ ~~108,00€~~

Complete your installation with

Complementary equipment

Raymarine

AIS 700 Classe B amb SPLITTER d'antena integrat

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Raymarine

Display multifunció i70s

Ref : E70327

678,00€

678,00€ ~~714,00€~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine A80559 adapter cable used for?

The Raymarine A80559 adapter cable is designed to connect traditional CHIRP transducers of the CPT-S and CPT-DVS types (equipped with a 9-pin connector) to Element HV series multifunction displays (which use a 15-pin connector). It allows you to reuse your existing transducer when upgrading your navigation system.

Which Raymarine transducers are compatible with this A80559 cable?

This cable is compatible with Raymarine transducers featuring a 9-pin connector, specifically models from the CPT-S series (for traditional CHIRP sonar) and CPT-DVS series (for DownVision and SideVision sonar). This includes transducers such as the CPT-100, CPT-110, CPT-120, as well as CPT-S models like references E70339, A80446, E70340, A80447, E70341, A80448, and A80545.

Which Raymarine multifunction displays is this cable compatible with?

The A80559 adapter cable is specifically designed for use with Raymarine Element HV series multifunction displays, which feature a 15-pin transducer connector.

Does this cable allow me to use HyperVision functions with my CPT-S/DVS transducer?

No, this adapter cable allows your Element HV display to use traditional CHIRP sonar signals from your CPT-S transducer or the DownVision/SideVision signals from your CPT-DVS transducer. The advanced HyperVision functions on Element HV displays require specific HyperVision transducers, which are not included with this cable and are not supported by CPT-S/DVS transducers.

Is it difficult to install the A80559 adapter cable?

The A80559 adapter cable is designed for a simple and direct plug-and-play connection between your existing transducer and your new Element HV display. Simply connect the 9-pin end to your CPT-S/DVS transducer and the 15-pin end to your Element HV display. The cable itself does not require any specific tools for installation, but accessing the transducer and display connectors may vary depending on your boat's setup.

What is the advantage of using this adapter cable instead of buying a new transducer?

The main advantage of this cable is that it allows you to keep and reuse your existing Raymarine CPT-S or CPT-DVS transducer when upgrading to an Element HV display. This represents significant savings by avoiding the purchase of a new transducer and simplifies installation by eliminating the need to drill new holes in the hull or modify the transom mount for a new transducer.

Is this cable compatible with CPT-DV transducers or older DownVision/SideVision transducers (CPT-100/110/120)?

Yes, this cable is compatible with Raymarine CPT-DV transducers and older DownVision/SideVision transducers such as the CPT-100, CPT-110, and CPT-120. All these transducers use a 9-pin connector, making them adaptable to Element HV displays (15-pin) via cable A80559.