Display multifunció i70s

The Raymarine i70s display is equipped with a 4.1-inch TFT LCD color screen. Its resolution is 320 x 240 pixels, providing a clear and detailed display of navigation data.

Yes, the display is designed for optimal readability even in full sunlight. It features a high brightness of 1200 cd/m² and multiple color palettes (day, night, inverted, red/black) to adapt to all lighting conditions.

The i70s display operates on a nominal voltage of 12V DC. The operating voltage range is from 9V DC to 16V DC. It connects to the SeaTalk NG network, which must be powered by a 12V DC source protected by a 5A fuse.

The i70s display uses Raymarine's SeaTalk NG network. This network is fully compatible with the NMEA 2000 standard, allowing it to integrate easily with equipment from other brands that comply with this standard.

The i70s is a multifunction display capable of showing a wide range of data from sensors on the network, including:

Wind data (speed and angle, apparent and true)Speed (surface and through water)DepthEngine data (RPM, temperature, etc.)AIS targetsTank levels (fuel, water)Navigation data (heading, position)

Yes, the i70s display is fully suitable for outdoor installation, such as in a cockpit. It has a dual IPX6 and IPX7 waterproof certification, ensuring protection against spray and temporary immersion.

Yes, it is possible to connect analog sensors (wind, speed, depth sounder) to the i70s display using the Raymarine iTC-5 converter. This unit converts the analog signals from the sensors into digital data for the SeaTalk NG / NMEA 2000 network, which the i70s can then read and display.

The i70s display has a very low power consumption. It uses only 1.7 watts, which corresponds to a current draw of 143 mA at a 12V power supply. This is a significant advantage for preserving battery autonomy, especially on sailboats.

Yes, the i70s display can show nearby AIS targets. To do this, an AIS receiver or transponder must be connected to the same SeaTalk NG / NMEA 2000 network as the display.

The i70s display has a single SeaTalk NG connector at the rear. It connects via a spur cable to a free white connector on the SeaTalk NG backbone. This single cable provides both power and data exchange.

Yes, the i70s interface is highly customizable. You can create your own "Favorites" pages by selecting the layout and data you want to display (e.g., wind and speed on the same page), for quick access to the information most important to you.

Yes, if your engine is equipped with an NMEA 2000 interface, the i70s display can receive and display numerous engine data such as RPM, coolant temperature, oil pressure, fuel consumption, etc.

The overall dimensions of the i70s display are 115 mm in width by 110 mm in height. The cutout for flush mounting is a 90 mm diameter circle. The depth behind the bulkhead is approximately 30 mm.

Yes, the i70s display allows calibration of most sensors connected to the network. You can access the calibration menus to adjust offsets and settings for depth, speed, wind, temperature, compass, and rudder reference sensors.

Yes, to ensure optimal operation, it is recommended to mount the i70s display:

Away from equipment that may cause electrical interference (engines, generators, radios).At least 1 meter from VHF radios and their cables.At a safe distance from any magnetic compass to avoid influencing it.

Yes, the i70s display is the successor to the previous generation of i70 displays. It features a modernized design, a brighter screen, and an improved user interface while maintaining compatibility with the SeaTalk NG ecosystem.

Yes, the i70s display has the "Shared Brightness" feature. By creating a brightness group on the network, you can adjust the lighting intensity of all compatible screens (such as Axiom chartplotters or p70s autopilots) simultaneously from a single device.

The MDS (Multiple Data Sources) function is a Raymarine system that manages conflicts when multiple sensors of the same type are present on the network (for example, two depth sounders or two GPS units). From the i70s, you can manually select the data source you want to use as the reference.

The i70s is compatible with a wide range of SeaTalk NG / NMEA 2000 smart sensors. Common examples include Tridata transducers such as the DST810 (depth, speed, temperature) or dedicated sensors like the DT810 (depth, temperature). It is also compatible with older analog sensors via the iTC-5 converter.