Kit vent sense fils inclòs sensor compàs per STNG (E70361, T120, E70096, T113-868, A06049, A06036, A06064, A06031, A06028)

The T70344 kit includes several essential components for wind and heading measurement:

A wireless wind sensor (E70361/T120)A wireless compass sensor (E70096)A Tacktick T113-868 bridge, which interfaces between the wireless sensors and the SeaTalk NG networkThe SeaTalk NG cables and connectors required for integration (A06049, A06036, A06064, A06031, A06028)

The main feature of the T70344 kit is its wireless operation for wind and compass sensors. This eliminates the need to run complex cables through the mast, greatly simplifying installation and reducing wiring-related issues.

The T70344 kit is designed to provide apparent wind and true wind data (after calibration), as well as accurate heading information. These data are critical for sailboat navigation and for the proper operation of an autopilot.

The wireless wind sensor (E70361/T120) is powered by solar energy via integrated panels and features an internal battery to ensure continuous operation, even in low-light conditions.

No, the wireless compass sensor (E70096) is powered by an internal battery. It communicates wirelessly with the T113-868 bridge.

The Tacktick T113-868 bridge is the core of the system integration. It wirelessly receives data from the wind and compass sensors, then converts and transmits it to your vessel's SeaTalk NG wired network, allowing other Raymarine instruments to access this information.

The wireless communication range between Tacktick sensors and the T113-868 bridge is generally sufficient for most sailboats, enabling reliable data transmission from the mast to the bridge location. While the exact range may vary depending on the environment, it is designed for standard marine use.

The T70344 kit is designed for simplified installation thanks to its wireless sensor design. The absence of cables to run through the mast reduces complexity. However, a basic understanding of SeaTalk NG networks and marine installation practices is recommended. Raymarine suggests a certified installation for optimal performance.

The wireless wind sensor (E70361/T120) must be mounted at the masthead, in a location unobstructed by sails, antennas, or other equipment, to ensure accurate wind measurement.

For the physical installation of the wind sensor at the masthead, you will generally need basic tools such as a drill, wrenches or screwdrivers suited to the provided fasteners, and potentially sealing compound for cable passages if necessary. It is also essential to have adequate safety equipment for working at height.

The T70344 kit is compatible with Raymarine multifunction displays (MFD) from the Axiom and Element series. It integrates seamlessly with these systems via the SeaTalk NG network.

Yes, the T70344 kit is fully compatible with Raymarine i70s instruments. Wind and heading data can be displayed and used by these instruments after integration into the SeaTalk NG network.

The T70344 kit uses Raymarine’s SeaTalk NG protocol. SeaTalk NG is based on NMEA 2000 and is compatible with NMEA 2000 via adapter cables or appropriate interfaces. Once connected to the SeaTalk NG network, data can be shared with other NMEA 2000 devices if the network is properly configured with an NMEA 2000 gateway.

Yes, the accurate true wind and heading data provided by the T70344 kit are essential and directly usable by Raymarine autopilots connected to the same SeaTalk NG network. This enables more precise navigation and better autopilot handling, particularly in wind mode.