Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 7%

Raymarine

A80604

Sonda de plàstic transpassant 0° HV-300 HyperVision (Cable 6 m)

La sonde plastique traversante 0° HV-300 HyperVision Raymarine (A80604) est conçue pour les coques plates, offrant une imagerie sous-marine détaillée grâce à la technologie HyperVision™. Elle s'intègre aux systèmes Raymarine Element et Axiom compatibles.

Ce modèle est une composante active de la gamme HyperVision et n'est pas obsolète. Elle est fournie avec un câble de 6 mètres.

Public priceGet pro pricing

393,59€

393,59€ ~~426,00€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tecnologies de sondatge compatibles	CHIRP, DownVision, SideVision, HyperVision
Tensió de funcionament	12
Freqüències del sonar	200, 350, 1200
Temperatura de funcionament	-25 à 55
Profunditat màxima de lectura	274.0
Material de la sonda	Plastique
Tipus de connector per a sondes	HyperVision 15 broches
Longitud del cable	6.0
Amplada del producte	60 mm
Sensor de temperatura integrat	Oui
Alçada del producte	40 mm
Pantalles compatibles	Raymarine Element
Fondària del producte	130 mm
Grau de protecció IP	IPX6/IPX7
Connectivitat sense fils	Non
Tipus de muntatge	Traversante
Certificacions	CE (Directive CEM 2014/30/UE)
Rang de mesura de temperatura	-25 à 55
Angle de cobertura del feix	25° (conique), 60° (avant-arrière)
Freqüència CHIRP alta	1200
Freqüència CHIRP baixa	200
Tipus de pesca	Mer, Lac, Verticale, Traîne
Sensor de velocitat integrat	Non
Any de llançament	2019.0
Nivell d'usuari	Intermédiaire
Garantia	2.0

Detailed description

Dissenyada per a una integració òptima en cascs plans o amb angle de quilla reduït, la sonda de plàstic transpassant 0° HV-300 HyperVision de Raymarine (referència A80604) ofereix una solució avançada de detecció submarina. Aquesta sonda forma part de la gamma HyperVision™ de Raymarine, reconeguda per les seves capacitats d'imatge d'alta resolució, similars a les dels models HV-300THP-P i HV-300THP-S, però especialment adaptada per a instal·lacions que requereixen un angle de 0° sense bloc de compensació. És compatible amb les pantalles multifunció Raymarine que suporten la tecnologia HyperVision.

Tecnologia HyperVision i instal·lació

La tecnologia HyperVision™ proporciona vistes detallades del fons marí i les estructures submergides, essencials per a la pesca i la navegació en zones complexes. La instal·lació de la sonda transpassant HV-300 (A80604) requereix l'ús de productes d'estanquitat a base de poliuretà neutre de qualitat marina, excloent els productes amb base d'acetat o de silicona. Un cable de 6 metres ve integrat per facilitar la connexió al sistema. Per garantir un funcionament constant, és imprescindible aplicar únicament pintures antisorres a base d'aigua i evitar operar la sonda fora de l'aigua per prevenir la sobreescalfament.

Manteniment i posicionament

El manteniment de la sonda HV-300 implica revisions periòdiques, neteja regular i reaplicació de pintura antisorres segons les instruccions del fabricant. En comparació amb la sonda HV-100, que és un model de tauler posterior, la HV-300 transpassant assegura un millor rendiment a alta velocitat i una reducció de les turbulències, gràcies al seu posicionament directe en el flux d'aigua sota el casc. El model de 0° (A80604) es distingeix per la seva facilitat d'integració en cascs on l'angle de quilla no requereix correcció, optimitzant així la claredat de les imatges obtingudes mitjançant la tecnologia HyperVision.

Documentation

Type	Nom
	EN - Plan technique - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	FR - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Gabarit de montage - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Gabarit de montage - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	FR - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Gabarit de montage - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Gabarit de montage - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)

Expert review

Pol CONIN

Responsable digital

« Raymarine HV-300 HyperVision: 0° Through-hull transducer for flat hulls »

The Raymarine HV-300 HyperVision (A80604) transducer is a suitable choice for flat-hull vessels or those with a zero-degree deadrise angle at the mounting location, aiming to maximize underwater imaging clarity. Its through-hull plastic design with a 0° angle is specifically intended for installations where a fairing block is unnecessary or undesirable, simplifying the integration and deployment of Raymarine’s HyperVision technology.

Unlike transom-mount models such as the HV-100, a through-hull installation delivers superior acoustic performance, particularly at high speeds, by minimizing turbulence and interference. Selecting this 0° model is critical: it must precisely match the deadrise angle of the hull section selected for installation to ensure optimal beam coverage. Incorrect installation on a hull with significant deadrise will degrade sonar return quality. Using a marine-grade neutral-cure polyurethane sealant is mandatory to ensure watertight integrity and long-term durability of the installation.

This transducer integrates seamlessly with Raymarine Element and Axiom systems compatible with HyperVision, providing users with highly detailed structural and fish detection capabilities. Sufficient access must be planned for drilling, tightening, and routing the provided 6-meter cable. For maintenance, only water-based antifouling paint should be applied; copper- or ketone-based products are prohibited for plastic transducers.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda de plàstic transpassant 0° HV-300 HyperVision (Cable 6 m)

393,59€

393,59€ ~~426,00€~~

Frequently Asked Questions

Need help? Contact us

What type of transducer is the Raymarine HV-300 and for which hull angle is it designed?

This transducer is a through-hull plastic model, specifically designed for flat hulls or those with a 0° deadrise angle. This means it is optimized for installation without an angle correction block on hulls that do not require compensation.

Which imaging technology is used by the HV-300 HyperVision depth sounder?

The HV-300 uses Raymarine's HyperVision™ imaging technology. This technology is renowned for its high-resolution imaging capabilities, providing detailed views of the seabed and submerged structures, which is essential for fishing and navigation in complex areas.

Which Raymarine multifunction displays is this transducer compatible with?

This transducer is compatible with Raymarine multifunction displays that support HyperVision™ technology. For optimal compatibility, ensure your display supports this specific technology.

What type of sealant should I use to install the HV-300 depth sounder?

For the installation of the through-hull HV-300 depth sounder, you must use only marine-grade polyurethane-based sealants. It is essential not to use acetate or silicone-based products, as they can damage the plastic components of the depth sounder.

Can I apply any antifouling paint to the depth sounder?

No, you must only apply water-based antifouling paints to the depth sounder. Do not use ketone-based or copper-based paints, as this could affect the sounder's performance and void the product warranty.

Is it possible to test or use the depth sounder out of the water?

No, it is mandatory to test and use the depth sounder only when it is submerged in water. Operating it out of the water may cause overheating of the transducer and potentially damage the product.

What is the length of the cable supplied with this transducer?

The 0° through-hull plastic transducer HV-300 HyperVision is supplied with an integrated 6-metre cable. This length is designed to simplify connection to your onboard electronics system.

What are the advantages of a through-hull transducer HV-300 compared to a transom-mount transducer?

Compared to a transom-mount transducer (such as the HV-100), the through-hull HV-300 provides better performance, especially at high speeds, and reduces turbulence. Its direct positioning in the water flow beneath the hull delivers more stable and accurate readings, which is critical for high-quality sonar imaging.