Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 3%

Raymarine

A80703

Sonda tauler RVM-100 RealVision 3D de Raymarine, connexió directa AXIOM2 Pro i RVM1600 (Cable 8m)

La sonde tableau Raymarine RVM-100 RealVision 3D (A80703) offre une imagerie sonar avancée avec des vues 3D, DownVision et SideVision. Conçue pour une connexion directe aux écrans AXIOM2 Pro et aux modules RVM1600, elle simplifie l'intégration du système. Le produit inclut la sonde RVM-100 avec un câble de 8 mètres.

Public priceGet pro pricing

687,71€

687,71€ ~~714,00€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tecnologies de sondatge compatibles	RealVision Max 3D, DownVision, SideVision, CHIRP large spectre
Tensió de funcionament	12V DC
Freqüències del sonar	CHIRP conique haute fréquence (200 kHz ± 5%), RealVision 3D (350 kHz ± 5%), SideVision (350 kHz ± 5%), DownVision (350 kHz ± 5%)
Temperatura de funcionament	-20°C à +70°C
Profunditat màxima de lectura	365.0
Material de la sonda	Plastique
Tipus de connector per a sondes	25 broches RealVision
Longitud del cable	8.0
Sensor de temperatura integrat	Oui
Pantalles compatibles	Axiom, Axiom+, Axiom Pro, Axiom XL, Axiom 2 Pro, Axiom 2 XL, RVX1000, RVM1600
Grau de protecció IP	IPx6, IPx7, IPx8
Tipus de muntatge	Tableau arrière
Certificacions	EN 60945:2002, IEC 28846:1993, EMC Directive 2014/30/EU, C-Tick (Australie et Nouvelle-Zélande)
Angle de cobertura del feix	CHIRP conique: 12° (200 kHz), 3D/SideVision: 180°
Freqüència CHIRP alta	200 kHz
Tipus de pesca	Pêche générale, Pêche de structure
Sensor de velocitat integrat	Non

Detailed description

Dissenyada per a una integració directa amb les pantalles multifunció AXIOM2 Pro i els mòduls sondadors RVM1600, la sonda tauler RVM-100 RealVision 3D de Raymarine (referència A80703) ofereix una capacitat d’imatge sonar avançada. Aquesta sonda permet als usuaris visualitzar estructures submarines i bancs de peixos amb una representació tridimensional del fons marí, complementant les vistes tradicionals DownVision i SideVision.

Tecnologia Sonar Avançada i Integració Simplificada

La sonda RVM-100 integra la tecnologia RealVision 3D, que es distingeix de les sondes 2D CHIRP o dels models més antics com la sèrie CPT (només DownVision/SideVision) per la seva capacitat de generar una imatge volumètrica del fons. Aquesta funcionalitat ofereix una comprensió espacial augmentada de l’entorn submarí. La seva connexió directa a les unitats AXIOM2 Pro, equipades amb capacitats sonar RealVision integrades, o al mòdul extern RVM1600, simplifica la instal·lació en evitar l’ús de caixes negres addicionals de sonar per a configuracions compatibles. El cable de 8 metres subministrat facilita el muntatge al tauler posterior de diversos tipus d’embarcacions.

Posicionament i Compatibilitat

La RVM-100 forma part de la gamma de transductors RealVision de Raymarine, oferint una solució de muntatge al tauler posterior per als sistemes de navegació moderns. Està optimitzada per funcionar amb el programari LightHouse 4 (versió v4.10.149 esmentada a la documentació), assegurant compatibilitat amb les pantalles Axiom, Axiom+, Axiom Pro, Axiom XL i Axiom 2 XL. En comparació amb els transductors passants de la sèrie RVM-400, la RVM-100 ofereix una opció de muntatge més accessible i menys intrusiva per a embarcacions on la perforació de la casc és a evitar, tot conservant les capacitats d’imatge RealVision 3D. El calibratge AHRS (Attitude and Heading Reference System) és compatible per optimitzar la qualitat de la imatge 3D compensant els moviments del vaixell.

Documentation

Type	Nom
	FR - Manuel d'utilisation - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)

Expert review

Pol CONIN

Responsable digital

« Technical analysis of the Raymarine RVM-100 RealVision 3D transom-mount transducer »

The Raymarine RVM-100 RealVision 3D (A80703) through-hull transducer is a key component for recreational boaters and anglers seeking detailed underwater visualization without the complexity of a through-hull installation. Its practical value lies in its ability to provide RealVision 3D, DownVision, and SideVision images directly integrated with Axiom 2 Pro MFDs or via the RVM1600 module. This approach significantly simplifies system architecture by reducing the number of external boxes, a notable advantage for mid-sized boats where space is often limited and wiring simplification is critical.

For installation, transom mounting is generally faster and less expensive than a through-hull installation. The 8-meter cable provided is sufficient for most boats under 10-12 meters, but an extension may be required for larger units or complex installations. It is crucial to select a transom location that minimizes water turbulence to ensure optimal image quality, especially at high speeds. The AHRS calibration is a mandatory post-installation step to ensure the accuracy of 3D representations by compensating for the boat's pitch and roll.

The RVM-100 differs from standard transducers by its native 3D imaging, offering a unique perspective for identifying structures and fish schools. It is particularly well-suited for sport fishing boats or coastal cruisers where precise knowledge of underwater terrain is an asset. However, for offshore applications or high-speed vessels, a through-hull transducer from the RVM-400 series may offer better performance and water stability.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda tauler RVM-100 RealVision 3D de Raymarine, connexió directa AXIOM2 Pro i RVM1600 (Cable 8m)

687,71€

687,71€ ~~714,00€~~

Frequently Asked Questions

Need help? Contact us

Which sonar technology does the Raymarine RVM-100 RealVision 3D transducer use?

The RVM-100 transducer integrates RealVision 3D technology, which provides a three-dimensional representation of the seabed. It also complements the traditional DownVision and SideVision views, as well as the high-frequency CHIRP sonar for precise target detection.

Which Raymarine multifunction displays is the RVM-100 transducer compatible with?

The RVM-100 transducer is compatible with Raymarine multifunction displays from the following series:

AxiomAxiom+Axiom ProAxiom XL Axiom 2 XL Axiom 2 Pro

It is optimized to operate with LightHouse 4 software (LightHouse 4 v4.10.149 or later recommended).

How does the RVM-100 transducer connect to my Raymarine navigation system?

The RVM-100 transducer is designed for direct connection. It connects directly to AXIOM2 Pro multifunction displays, which have integrated RealVision sonar capabilities. For other compatible Axiom displays, the transducer connects directly to the RVM1600 external sounder module.

What is the mounting type for the RVM-100 RealVision 3D transducer?

The RVM-100 is a transom-mount transducer. This mounting type is a non-invasive option for boats where hull drilling is to be avoided, while maintaining RealVision 3D imaging capabilities.

What is the length of the cable supplied with the RVM-100 transducer?

The RVM-100 transducer comes with an 8-metre cable. This length is designed to facilitate installation on the transom of various types of vessels.

Does the RVM-100 transducer require an external sounder module (black box)?

No, the RVM-100 transducer does not require an additional black-box sonar module if connected to an Axiom2 Pro multifunction display, as these units already include RealVision sonar capabilities. If using another compatible Axiom display, the transducer connects directly to the external RVM1600 sounder module.

Does the RVM-100 transducer support AHRS calibration?

Yes, the RVM-100 transducer supports AHRS (Attitude and Heading Reference System) calibration for RealVision technology. This calibration is critical for stabilizing sonar imagery and compensating for boat motion, providing a more accurate representation of the seabed.

What are the main imaging capabilities offered by the RVM-100 RealVision 3D fishfinder?

The RVM-100 RealVision 3D fishfinder provides several advanced imaging capabilities for a better understanding of the underwater environment:

RealVision 3D: Generates a volumetric three-dimensional image of the seabed, structures, and fish schools.
DownVision: Provides a detailed view beneath the boat, similar to a photographic image.
SideVision: Offers a side view of structures and fish on either side of the boat.
High-frequency CHIRP sonar: Enables precise target detection and excellent separation.