Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 12%

Raymarine

A80465

Sonda transversal de bronze 0° RV-200 RealVision 3D, connexió directa AXIOM (Cable 8m)

Conçue pour les écrans Raymarine Axiom, la sonde traversante RV-200 RealVision 3D en bronze offre une imagerie sous-marine détaillée (DownVision, SideVision, RealVision 3D). Son inclinaison de 0° est adaptée aux coques à faible ou sans inclinaison. Le produit inclut la sonde avec un câble intégré de 8m et une vis de fixation en bronze M8 x 100mm pour l'alignement.

Public priceGet pro pricing

1.103,14€

1.103,14€ ~~1.254,00€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tecnologies de sondatge compatibles	RealVision 3D,DownVision,SideVision
Tensió de funcionament	12 V DC
Freqüències del sonar	200 kHz (CHIRP Conique), 350 kHz (RealVision 3D, DownVision, SideVision)
Temperatura de funcionament	-25 à +55
Profunditat màxima de lectura	91.0
Material de la sonda	Bronze
Tipus de connector per a sondes	Raymarine RealVision 3D (25 broches)
Longitud del cable	8.0
Sensor de temperatura integrat	Oui
Pantalles compatibles	Raymarine Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL, Axiom 2 XL
Tipus de muntatge	Traversante
Certificacions	CE
Angle de cobertura del feix	180
Freqüència CHIRP alta	420
Freqüència CHIRP baixa	350
Tipus de pesca	Mer, Lac, Traîne, Verticale
Sensor de velocitat integrat	Non

Detailed description

Dissenyada per integrar-se directament amb les pantalles multifunció Raymarine Axiom, la sonda transversal RV-200 RealVision 3D de bronze ofereix una solució avançada de detecció submarina. Aquest transductor utilitza la tecnologia RealVision 3D per proporcionar una imatge detallada del món submarí, incloent estructures, fons marí i peixos. És compatible amb les funcions DownVision i SideVision, permetent una exploració completa sota i als costats del vaixell.

Disseny i posicionament

La RV-200 es distingeix per la seva construcció en bronze, fent-la adequada per a cascs de fibra de vidre o fusta i oferint una durabilitat superior en entorns marins exigents. Amb una inclinació de 0°, aquesta sonda està especialment dissenyada per a cascs amb poca o cap inclinació (deadrise), assegurant un feix sonar perpendicular al fons marí per a un rendiment òptim. S’integra directament als sistemes Axiom, com ara els models Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL i Axiom 2 XL, simplificant la instal·lació i la configuració.

Integració i especificacions tècniques

El cable de 8 metres integrat a la sonda RV-200 permet una connexió directa als pantalles Axiom compatibles, eliminant la necessitat d’un mòdul sonar extern. Aquesta configuració assegura una transmissió de dades ràpida i una interfície d’usuari fluida mitjançant el programari LightHouse 4. El sistema de fixació inclou un cargol de cap hexagonal de bronze M8 x 100mm per a l’alineació, garantint una instal·lació estable i precisa. A diferència de les sèries RV-3xx de plàstic o RV-4xx d’acer inoxidable, la RV-200 de bronze està posicionada per als usuaris que busquen una robustesa superior i un rendiment fiable en condicions diverses, sense comprometre la qualitat d’imatge RealVision 3D.

Documentation

Type	Nom
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	FR - Manuel d'utilisation - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)

Expert review

Pol CONIN

Responsable digital

« Technical analysis: Raymarine RV-200 RealVision 3D through-hull transducer for Axiom »

The Raymarine RV-200 RealVision 3D through-hull transducer is a strategic choice for recreational boaters and anglers equipped with an Axiom multifunction display and whose vessel has a hull with low or no deadrise. Its bronze construction is designed for permanent installations where robustness and corrosion resistance are critical, particularly in saltwater or high-marine-activity zones. The RealVision 3D technology is especially valued for detailed seabed mapping and precise detection of submerged structures, providing a clear advantage for sport fishing or navigation in complex waters.

The main advantage of this transducer lies in its direct connection to Axiom displays, which significantly simplifies system architecture by eliminating the need for an external sonar module. This reduces not only overall cost and footprint but also potential failure points. The through-hull installation requires expertise for hull drilling and sealing, but the 0° tilt facilitates alignment on flat hulls. It is critical to ensure the boat meets this hull angle requirement to maximize sonar beam performance.

While bronze offers excellent durability, it is important to note that this transducer is not recommended for aluminum hulls without specific precautions to prevent galvanic corrosion. For hulls with more pronounced deadrise, it would be preferable to opt for transducers with a tilted element (12° or 20°) to compensate for the hull angle and ensure optimal sonar coverage. The RV-200 is therefore a targeted, high-performance, and integrated solution, ideal for applications where a 0° bronze through-hull transducer is technically justified.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda transversal de bronze 0° RV-200 RealVision 3D, connexió directa AXIOM (Cable 8m)

1.103,14€

1.103,14€ ~~1.254,00€~~

Frequently Asked Questions

Need help? Contact us

What is the main function of the Raymarine RV-200 RealVision 3D transducer?

The RV-200 RealVision 3D transducer is designed to provide advanced and detailed underwater imaging. It uses RealVision 3D technology to display structures, the seabed, and fish with exceptional clarity. Additionally, it integrates DownVision and SideVision functions for complete exploration beneath and alongside your vessel.

Which Raymarine multifunction displays is the RV-200 sounder compatible with?

The RV-200 sounder is designed for direct integration with Raymarine multifunction displays in the Axiom family. It is compatible with the following models:

Raymarine AxiomRaymarine Axiom+Raymarine Axiom ProRaymarine Axiom 2 ProRaymarine Axiom XLRaymarine Axiom 2 XL

For which type of hull is the RV-200 0° transducer specifically designed?

The RV-200 transducer with a 0° tilt is specifically designed for boat hulls with minimal or no deadrise. This design ensures a sonar beam perpendicular to the seabed, guaranteeing optimal imaging performance. It is suitable for fiberglass or wooden hulls.

What is the RV-200 depth sounder made of and what are its advantages?

The RV-200 depth sounder is made of bronze. This material provides superior durability and increased robustness, making it particularly suitable for harsh marine environments and fiberglass or wooden hulls.

Does the RV-200 transducer require an external sonar module to work with an Axiom display?

No, the RV-200 transducer is designed for direct connection to compatible Raymarine Axiom displays. Its integrated 8-meter cable allows the transducer to be plugged directly into the display, eliminating the need for an external sonar module. This setup simplifies installation and ensures fast data transmission.

How is the RV-200 transducer mounted to the boat hull?

The RV-200 transducer is mounted to the hull using a robust mounting system. This includes an M8 x 100 mm bronze hex-head screw designed to ensure stable and precise alignment of the transducer.

Which sonar technologies are integrated in the RV-200 sounder?

The RV-200 sounder integrates several advanced Raymarine sonar technologies for a complete underwater view:

RealVision 3D: For a detailed three-dimensional representation of the seabed and structures.DownVision: For a photorealistic view of the world beneath the boat.SideVision: For a clear side view of structures and fish on the sides of the boat.

Is a specific calibration required after installing the RV-200 transducer?

Yes, after installing the RV-200 transducer, a RealVision™ AHRS (Attitude and Heading Reference System) calibration is recommended. This calibration is essential to ensure the accuracy and optimal quality of RealVision 3D imaging, by ensuring the transducer correctly compensates for the boat's movements.