Sonde traversante plastique bâbord 12° HV-300 HyperVision

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 11%

Raymarine

R70725

Sonda travessera de plàstic babord 12° HV-300 HyperVision

La sonde traversante plastique bâbord 12° HV-300 HyperVision Raymarine (R70725) est conçue pour une imagerie sonar détaillée avec les technologies DownVision, SideVision et RealVision. Idéale pour les coques planantes avec un dièdre de 8 à 16 degrés, elle offre une performance stable à haute vitesse grâce à son installation traversante. Ce modèle bâbord est complémentaire à la version tribord (R70726) pour une intégration optimale.

Public priceGet pro pricing

366,10€

366,10€ ~~414,00€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tecnologies de sondatge compatibles	HyperVision, DownVision, SideVision, RealVision 3D, CHIRP Conique Haute Fréquence
Freqüències del sonar	1.2 MHz, 350 kHz, 200 kHz
Profunditat màxima de lectura	274.0
Material de la sonda	Plastique
Tipus de connector per a sondes	25 broches RealVision
Sensor de temperatura integrat	Oui
Pantalles compatibles	Raymarine Axiom, Axiom+, Axiom Pro, Element HV
Grau de protecció IP	IPX8
Tipus de muntatge	Traversante
Certificacions	Directive CEM 2014/30/UE
Rang de mesura de temperatura	-2°C à +55°C
Freqüència CHIRP alta	1200 kHz
Freqüència CHIRP baixa	200 kHz
Tipus de pesca	Pêche générale, détection de structures
Sensor de velocitat integrat	Non
Any de llançament	2019.0
Nivell d'usuari	Intermédiaire (fonctions avancées)

Detailed description

Dissenyada per als sistemes de sonda avançats Raymarine, la sonda travessera de plàstic babord 12° HV-300 HyperVision, referència R70725, ofereix una solució de detecció submarina per a embarcacions amb casc planejant. Aquesta sonda utilitza la tecnologia HyperVision™ de Raymarine, que permet obtenir imatges detallades del fons marí i de les estructures submarines. Està especialment dissenyada per a la instal·lació al costat babord del vaixell, amb un angle de correcció de 12° per compensar el dièdre del casc.

Posicionament i tecnologia HyperVision™

La sonda HV-300 HyperVision es diferencia dels models de tauler posterior com la HV-100 per la seva instal·lació travessera, que garanteix un rendiment òptim a alta velocitat i una exposició mínima a les turbulències. El model R70725 és la versió babord (HV-300THP-P), complementària a la versió estribord (HV-300THP-S, R70726), cosa que ofereix flexibilitat d’instal·lació per adaptar-se a les configuracions del casc i evitar interferències amb els apèndixs o les hèlixs. La tecnologia HyperVision™ integra les funcions DownVision, SideVision i RealVision, proporcionant imatges sonar de major claredat per a la identificació de peixos i estructures. Aquest producte compleix amb la directiva EMC 2014/30/EU.

Recomanacions d’instal·lació i manteniment

La instal·lació de la sonda HV-300 requereix l’ús de masilla de poliuretà de polimerització neutra de qualitat marina, excloent les mastiques a base d’acetat o de silicona per evitar danyar els components de plàstic. Per al manteniment, es recomana l’aplicació d’una pintura antisorral a base d’aigua, evitant les pintures a base de cetona o de coure que podrien afectar el rendiment o la garantia. És imprescindible provar i utilitzar la sonda únicament quan el vaixell estigui a l’aigua per evitar sobreescalfaments. Es recomana una instal·lació certificada per un professional autoritzat per Raymarine per obtenir una garantia de producte estesa.

Documentation

Type	Nom
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	FR - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Gabarit de montage - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Gabarit de montage - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	FR - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Gabarit de montage - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Gabarit de montage - Sonde traversante plastique bâbord 12° HV-300 HyperVision

Expert review

Pol CONIN

Responsable digital

« Technical analysis of the Raymarine HV-300 through-hull transducer portside 12° »

The Raymarine HV-300 HyperVision through-hull transducer in portside configuration with a 12° compensation angle (R70725) is a technically sound choice for owners of planing hull vessels where the deadrise angle at the selected location is between 8 and 16 degrees. Unlike the transom-mounted HV-100 series, this through-hull setup reduces drag and ensures laminar water flow around the transducer element, which is critical for maintaining HyperVision sonar image quality at higher speeds. The portside position is often preferred on monohulls or catamarans to avoid disturbances generated by the main propeller or other hull appendages.

Installing this type of transducer requires significant expertise, including hull fairing, drilling, and flawless waterproofing. A fairing block may be necessary to optimize the angle and performance if the actual deadrise deviates slightly from the built-in 12°. It is essential to strictly follow Raymarine’s recommendations for sealants (neutral polyurethane) and antifoulings (water-based) to ensure installation longevity and warranty validity. Poor location selection can cause turbulence, degrading sonar returns, especially in SideVision mode. For high-deadrise hulls or specific applications, evaluate whether a model with a different compensation angle or a custom fairing block would be more suitable.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda travessera de plàstic babord 12° HV-300 HyperVision

366,10€

366,10€ ~~414,00€~~

Frequently Asked Questions

Need help? Contact us

What is the HV-300 HyperVision through-hull transducer from Raymarine?

The HV-300 HyperVision is a plastic through-hull transducer designed for installation on the port side of the vessel, featuring a 12° angle correction to compensate for hull deadrise. It uses Raymarine’s HyperVision™ technology, integrating DownVision, SideVision, and RealVision functions to provide detailed imaging of the seabed and underwater structures. This installation method ensures optimal performance at high speeds with minimal exposure to turbulence.

What type of sealant should I use to install the HV-300 transducer?

For installing the HV-300 transducer, you must use only a marine-grade neutral-cure polyurethane sealant. It is essential not to use sealants containing acetate or silicone, as they could damage the plastic components of the transducer.

Can I apply any antifouling paint to the HV-300 depth sounder?

No, you cannot use any antifouling paint. It is recommended to apply only water-based antifouling paint on the HV-300. Avoid ketone- or copper-based paints, as they may affect the depth sounder's performance or void the warranty.

Is it possible to test or use the HV-300 transducer out of the water?

No, it is mandatory to test and use the HV-300 transducer only when the vessel is in the water. Using the transducer out of the water may cause overheating and damage the device.

What is the difference between the HV-300 and HV-100 depth sounders?

The main difference lies in their installation method:

The HV-300 is a thru-hull depth sounder, designed to be installed through the hull of the vessel. This installation provides optimal performance at high speed and minimal exposure to turbulence.

The HV-100 is a transom-mount depth sounder, designed to be attached to the transom of the vessel.

Both depth sounders use HyperVision™ technology for sonar imaging.

Which Raymarine multifunction displays are compatible with the HV-300 HyperVision transducer?

The HV-300 HyperVision transducer is primarily compatible with Raymarine Element HV series multifunction displays. These displays are designed to fully leverage HyperVision™ technology and provide detailed sonar imagery.

What does "port 12°" mean in the HV-300 depth sounder designation?

The designation "port 12°" indicates two important features:

Port: The depth sounder is specifically designed to be installed on the left side of the vessel (port side).12°: The depth sounder includes a 12° correction angle to compensate for the deadrise (V-shaped hull angle) of the boat. This ensures the fishfinder beam is directed vertically toward the seabed, providing accurate and optimal readings.

What are the recommendations for choosing the installation location of the HV-300 through-hull transducer?

To ensure optimal performance of the HV-300 transducer, it is essential to choose an appropriate installation location. Here are the key recommendations:

Select a spot where the water flow is smooth and undisturbed by hull appendages (propellers, keels, strakes, etc.). Avoid areas prone to turbulence or air bubbles, which can degrade sonar signal quality. Ensure the location is away from any source of electrical interference. The installation site must be accessible for setup, maintenance, and cleaning of the transducer.