Capteur Trifonctions Sondeur/Loch et Température

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 13%

Raymarine

T910

Sensor Trifunció Sondeig/Log i Temperatura

Le Raymarine T910 est un émetteur de coque conçu pour traiter les données de profondeur, vitesse et température d'un triducer, s'intégrant au système 12/24Vdc du bateau. Cette unité est essentielle pour centraliser et transmettre ces informations de navigation. Inclus : vis auto-foreuses et gabarit de montage.

Public priceGet pro pricing

217,46€

217,46€ ~~252,00€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tensió de funcionament	12/24 V
Amplada del producte	47 mm
Alçada del producte	52.5 mm
Fondària del producte	42.5
Compatibilitat de bus	NMEA 2000
Xarxa amb fil	NMEA 2000
Tipus de muntatge	Montage en surface
Vàlvula auto-tancament	Non
Empotrat	Non
Ubicació d'instal·lació	Intérieur, au-dessus de la ligne de flottaison, ventilé
Calibratge de velocitat del vaixell	Via système de navigation connecté
Mesura de temperatura	Oui
Tipus de sortida del sensor	Numérique (NMEA 2000)
Tipus de sensor	Interface de capteur multifonction

Detailed description

El Raymarine T910 és un emissor de buc dissenyat per gestionar les dades d'un sensor trifunció (triducer) que mesura la profunditat, la velocitat i la temperatura. Aquesta unitat actua com a interfície entre el triducer i el sistema de navegació del vaixell, consolidant aquests tres paràmetres essencials per a un monitoratge precís. És compatible amb una alimentació de bord de 12/24Vcc, i també ofereix la possibilitat d'alimentar-se mitjançant un panell solar Raymarine en absència d'una font d'energia dedicada.

Instal·lació i connectivitat del T910

La instal·lació del Raymarine T910 requereix un posicionament estratègic a bord. La unitat s'ha de muntar verticalment, amb els cables sortint per la part inferior, i obligatòriament a com a mínim 50 cm per sobre de la línia de flotació. És crucial evitar qualsevol contacte directe amb l'aigua i prioritzar una zona ben ventilada, excloent els compartiments estancs segellats. El muntatge es realitza mitjançant tres forats de 2,5 mm, utilitzant els cargols autotrepants subministrats, amb especial atenció a no estrènyer massa per preservar la integritat de la carcassa.

Detalls sobre el cablejat i la integració

El connexió dels cables del transductor al Raymarine T910 ha de seguir un codi de colors específic. En el cas d'un triducer, la pantalla de massa s'ha de connectar al connector de profunditat i no al de velocitat, per evitar curtcircuits. Si el sensor de velocitat utilitzat no disposa de sonda de temperatura integrada, cal connectar els terminals marró i blanc del connector de velocitat per assegurar la continuïtat del senyal. S'aconsella aplicar greix de silicona als terminals per optimitzar la connexió, i utilitzar un suport per als cables a prop de l'emissor. Finalment, la tapa s'ha de col·locar correctament per mantenir les fundes exteriors dels cables dins de l'emissor, garantint així una protecció adequada de tot el cablejat.

Documentation

Type	Nom
	EN - Gabarit de montage - Capteur Trifonctions Sondeur/Loch et Température
	EN - Notice d'installation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température

Expert review

Pol CONIN

Responsable digital

« Raymarine T910 interface: reliable management of triducer data »

The Raymarine T910 is a hull-mounted transmitter essential for vessels requiring reliable centralization of core navigation data: depth, speed, and temperature. This module is not the sensor itself but the electronic interface that receives and processes signals from an external triducer. Its practical value lies in converting raw sensor data into usable information for the onboard electronic system, often for integration into an NMEA or SeaTalkNG network, with NMEA output protocol specifically referenced in the technical documentation.

Installing the T910 requires careful consideration. As a hull-mounted transmitter, it is installed inside the vessel, simplifying maintenance and avoiding additional hull penetrations compared to a through-hull transducer. However, this imposes specific constraints: vertical mounting, more than 50 cm above the waterline, and in a ventilated space away from direct moisture. These requirements are critical to ensure longevity and signal reliability. Installers must pay close attention to transducer wiring, particularly grounding the shield to the depth connector for triducers, and bridging the brown and white terminals if the speed sensor lacks a temperature probe. These details are decisive for proper operation and system integrity.

This type of interface is particularly relevant for owners looking to modernize or improve the reliability of their navigation data acquisition without replacing all their sensors. It serves as a key component for converting and transmitting basic data, often a prerequisite for display on multifunction displays or dedicated screens. It is not suitable for direct exposure to the elements or installation in sealed compartments that would prevent necessary ventilation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sensor Trifunció Sondeig/Log i Temperatura

217,46€

217,46€ ~~252,00€~~

Frequently Asked Questions

Need help? Contact us

What are the prerequisites for drilling the mounting holes for the T910?

You must drill three 2.5 mm holes. These holes are marked "B" on the mounting template provided with the device.

Which screws should be used to mount the T910 and are there any precautions?

The T910 must be mounted using the self-tapping screws provided. It is very important not to overtighten the screws, as this could damage the housing molding.

How to connect the transducer cables to the T910?

Connecting the transducer cables to the Raymarine T910 must follow the specific color code indicated on the unit. It is also necessary to sleeve the shields to prevent short circuits.

How to connect the ground braid of a triducer to the T910?

For a triducer, the ground braid MUST be connected to the depth connector, not the speed connector. This prevents short circuits and ensures proper operation.

What to do if my speed sensor has no integrated temperature probe?

If your speed sensor does not include a temperature probe, you must connect the brown and white wires of the speed connector. This connection ensures signal continuity.

Should a product be applied to the T910 connection terminals?

Yes, it is recommended to apply silicone grease to the connection terminals to optimize connection quality and protect it.

How to ensure proper cable management after connection to the T910?

It is recommended to support the cables near the transmitter. Additionally, the unit's cover must be correctly positioned to keep the outer cable sheaths inside the transmitter, ensuring their secure attachment and protection.

How to check that the T910 cover is correctly installed?

Ensure the cover is properly fitted and secures the outer sleeves of the cables inside the transmitter housing. This ensures connection protection and the durability of the installation.

Is the T910 compatible with all types of transducers?

The Raymarine T910 is specifically designed to be used with a triducer (triple-function transducer) measuring depth, speed, and temperature. Its compatibility will therefore depend on the type of triducer you have.

Can the T910 be used with older transducers?

Yes, the T910 can potentially be used with older transducers. However, it is advisable to carefully check the connections, especially if the speed sensor does not have an integrated temperature probe, in which case a link between the brown and white terminals of the speed connector will be required.

What types of data can the T910 process?

The T910 is designed to process and interface depth, speed (log), and temperature data. These three types of measurements are consolidated by the unit for your navigation system.

Can incorrect installation of the T910 affect the warranty?

Yes, failure to follow the installation instructions provided with the Raymarine T910 may void your warranty. It is therefore essential to strictly adhere to all installation and wiring guidelines.