Passacable horitzontal per cables de 6 a 10 mm - Gris

The Scanstrut DS-HD10 cable gland is a professional sealing solution designed for passing two cables through a marine deck or bulkhead. It ensures a clean installation and protects the boat's interior from water ingress and external elements.

The Scanstrut DS-HD10 cable gland is specifically designed to accommodate two cables simultaneously, providing a dual solution for installations requiring the passage of multiple cables of similar size.

The Scanstrut DS-HD10 cable gland has a length of 75.1 mm (2.95 inches) and a width of 66.5 mm (2.61 inches). Its height or depth is 28.5 mm (1.12 inches).

The Scanstrut DS-HD10 cable gland is gray, allowing it to blend discreetly with most dashboards and decks.

The primary function of the DS-HD10 cable gland is to ensure optimal watertight sealing for the passage of two marine cables, thereby protecting electronic equipment and the boat's interior from water ingress, UV rays, and salt spray.

The DS-HD10 cable gland is manufactured by Scanstrut using robust and durable materials designed to withstand UV exposure, salt spray, and mechanical stresses in the marine environment.

Yes, the Scanstrut DS-HD10 cable gland is designed to be UV-resistant, ensuring durability and maintaining its properties and color even after prolonged sun exposure.

The Scanstrut DS-HD10 cable gland is compatible with cables having a diameter between 6 mm and 10 mm (0.23 to 0.39 inches).

The DS-HD10 cable gland is supplied with a set of 12 bungs (6 pairs), including pairs for the following cable diameters: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, as well as blank bungs (without holes) to seal an unused cable gland or for customization.

Yes, the DS-HD10 is a complement to other products in the Scanstrut range. It provides a dual solution for installations similar to those using the DS-H6 (for a single cable from 2 to 6 mm) or the DS-H10 (for a single cable from 6 to 10 mm).

Yes, this cable gland can be installed on various materials. It is compatible with soft materials (such as plywood), hard materials (such as fiberglass, hardwoods, acrylic) and metal surfaces (such as steel and aluminum). The screw fastening method may vary depending on the type of material.

To install the Scanstrut DS-HD10 cable gland, a 32 mm (1-1/4 inches) diameter hole must be drilled.

For installation, you will need the following tools: a Pozidriv screwdriver, silicone, 2.5 mm (3/32 in) or 3 mm (1/8 in) drill bits depending on the surface material, and a hole saw or 32 mm (1-1/4 in) drill bit.

Four self-tapping screws size #6 x 16 are included in the package for mounting the cable gland base on soft or hard materials.

No, for installation on metal surfaces (such as steel or aluminum), it is recommended to use M3 countersunk bolts longer than 12 mm with a washer and Nyloc nut. These components are not included in the package and must be purchased separately.

You must choose the bungie with a diameter closest to that of your cable. The cable gland comes with pairs of bungies in different sizes (6 mm, 7 mm, 8 mm, 9 mm, 10 mm) and blank bungies to suit your needs.

Yes, it is important to carefully deburr the drilled hole before installing the cable gland. This ensures a smooth surface and better adhesion for optimal sealing.

Waterproofing is ensured by several elements: the two-part design of the cable gland with an integrated gasket, the use of bungs sized to the exact diameter of each cable, and the recommended application of silicone when securing the base to the surface.

The footprint, or the area covered by the cable gland once installed, measures 75.1 mm long by 66.5 mm wide. A cutting template is provided in the instructions to assist with positioning and installation.