Muntatge Rail Pod sobre tub - Per a Pod 1 pantalla

The Rail Pod mount on a Scanstrut SPR-1i-RM tube is a bracket specifically designed to secure a pod housing a single display unit to a tube, such as a pulpit, arch, or tiller extension. It allows you to mount your electronic instrument securely and ergonomically aboard your boat.

A "Pod 1 display" refers to a watertight Scanstrut enclosure (such as a Scanpod) designed to hold a single instrument or screen. The Rail Pod SPR-1i-RM is the mounting bracket for this type of enclosure. The "Pod 1 display" enclosure itself is generally not included with the bracket and must be purchased separately.

The Rail Pod tube mount for Scanstrut SPR-1i-RM is designed to be installed on common tube diameters in the marine environment. It is generally compatible with tubes from 25 mm (1 inch) to 33.7 mm (1 1/3 inches). Inserts can be provided to precisely fit different diameters.

Yes, the Rail Pod mount on the Scanstrut SPR-1i-RM tube is designed to provide adjustment flexibility. It allows tilting the display housing to optimize the viewing angle, ensuring maximum readability from different positions aboard.

The SPR-1i-RM Pod Rail integrates a discreet cable management system. Your display cables can be routed inside the mount and the mounting tube (if the tube allows it), providing a clean installation and protection against elements and snags.

The Rail Pod itself is designed to withstand marine conditions. However, the waterproofing of the assembly will primarily depend on the "Pod 1 display" housing you install in it. Scanstrut housings are generally waterproof to IP standards, and the mount is designed to maintain this waterproofing when correctly assembled with a compatible housing.

The Rail Pod installation is designed to be achievable by a knowledgeable user. It involves securing the mount to the tube using the supplied clamp straps and then assembling the "Pod 1 display" housing onto the Rail Pod. Detailed instructions are typically included to facilitate the process.

This bracket is specifically designed for Scanstrut "Pod 1 display" housings. These housings are then adapted to accommodate a wide range of marine electronic instruments, such as multifunction displays, data repeaters, autopilot screens, or small chartplotters, provided they fit within the compatible housing dimensions.

The Rail Pod SPR-1i-RM is primarily designed for mounting on small-diameter horizontal or vertical tubes, such as balconies or tiller feet. For mast mounting, which typically has a larger diameter, Scanstrut offers specific mast mounts with different fastening systems.

Yes, as a Scanstrut marine product, the Rail Pod is designed to withstand the vibrations and shocks inherent to the nautical environment. Its robust design and high-quality materials ensure a stable and secure mounting of your instrument, even in rough sea conditions.

For installing the Rail Pod, you will generally need basic tools such as an Allen key (or adjustable wrench, depending on the screw type), a screwdriver, and potentially a drill if you need to create cable passages or secure the display unit to the bracket. The specific tools are detailed in the installation manual.

Yes, the Rail Pod design includes cable passages. This allows cables to be discreetly routed inside the mount and the mounting tube (if the tube is hollow), providing a very clean and professional installation while protecting the cables from external elements.

Yes, the clamp mounting system allows the Rail Pod to be removed from the tube relatively easily without causing permanent damage. This can be useful for wintering, maintenance, or repositioning the equipment.

Yes, the Rail Pod mount on a Scanstrut SPR-1i-RM tube is universally suited to the marine environment, whether on a sailboat or powerboat. It can be installed on any compatible tube or rail, providing a versatile mounting solution for various types of vessels.

Yes, the Rail Pod is generally shipped with all the hardware and parts required to securely mount it on a tube and to assemble the "Pod 1 display" housing to the bracket. This includes hose clamps and mounting screws.

The Rail Pod SPR-1i-RM is specifically designed for mounting on round-section tubes. The clamps are shaped to perfectly fit a round tube. It is not suitable for installation on square or oval tubes.