Gestion de batterie Smart BMS CL 12/100 - Victron Energy

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 18%

Victron Energy

BMS110022000

Smart BMS CL 12-100

Victron Energy's Smart BMS CL 12-100 is an all-in-one battery management system designed for 12 V systems with a 12 V alternator and Victron Smart lithium batteries (12.8 V). It protects the alternator from overcharging and monitors each cell to prevent under/overvoltage and high temperatures.

Public priceGet pro pricing

157,61€

157,61€ ~~193,20€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Funció del producte	BMS
Tecnologies de bateria compatibles	LiFePO4
Sèries de bateries compatibles	Victron Lithium Smart
Tensió nominal	12.8
Nombre de bancs de bateries	1.0
Corrent continu (A)	100.0
Corrent de càrrega màxim (A)	100.0
Nombre de cèl·lules suportades	4 cellules
Protocol de comunicació	Bluetooth
Compatible amb Bluetooth	Oui
Marxa/aturada remota	Oui
Sortida de prealarma	Oui
Sortida de tall de consum	Oui
Sortida de tall de càrrega	Oui
Funcions de protecció	Over-voltage, Under-voltage, Over-temperature
Mida de terminal	M8, Faston 6.3 mm
Tipus de connexió	Bornes à vis M8, Faston, Connecteurs à fiches
Tipus de muntatge	Montage en surface
Grau de protecció IP	IP65
Interval de temperatura de funcionament	-40 °C à +60 °C
Dimensions (L x A x P)	120 x 65 x 224 mm
Pes	1.6
Alternator Charge Current Limit A	90
Alternator Charge Current Limit Percent	90
Automotive Directive Compliance	ECE R10-5
Auxiliary Fuse Rating A	7.5
Monitoratge integrat de la bateria	Oui
Battery Overcharge Current Protection	Oui
Tecnologia de la bateria	LiFePO4
Charge Disconnect Output Current Limit Ma	10
Current Consumption Off Mode Ma	5
Current Consumption On Mode Ma	16
Dc Connection Terminal Type	M8
Dc Power Connection Torque Nm	10
Tensió de tall de descàrrega	11.2
Norma d'emissió CEM	EN 61000-6-3, EN 55014-1
Norma d'immunitat CEM	EN 61000-6-2, EN 61000-6-1, EN 55014-2
Calibre del fusible recomanat	100
Humitat màxima de funcionament	100
Input Voltage Start Charging	13
BMS integrat	Oui
Ús previst	Véhicules, Bateaux
Load Disconnect Output Current Limit Ma	10
Nombre màxim de bateries en paral·lel	20.0
Nombre màxim de bateries en sèrie	1.0
Max System Energy Kwh	84
Pre Alarm Output Current Limit A	1
Pre Alarm Output Short Circuit Protected	Non

Detailed description

Dissenyat per a sistemes de 12 V equipats amb un alternador, el Smart BMS CL 12-100 de Victron Energy és un sistema de gestió de bateria (BMS) tot en un dedicat a bateries de liti Victron Smart de 12,8 V. Garanteix la protecció i la supervisió de cada cel·la individual, gestionant fins a 20 bateries per a una capacitat de magatzematge màxima de 84 kWh en un sistema de 12 V. Especialment adaptat a vehicles i embarcacions, aquest BMS integra una protecció essencial per a l’alternador i les bateries.

Protecció integrada i limitació de corrent

El port Alternador/Starter Batt+ del Smart BMS CL 12-100 ofereix una limitació de corrent electrònica a aproximadament el 90 % del calibre del fusible. Per exemple, amb un fusible de 100 A, el corrent d’entrada es limita a aproximadament 90 A. Aquesta funcionalitat protegeix l’alternador contra la sobrecàrrega, evitant així l’escalfament excessiu i la fallada d’alternadors de 12 V en funcionament prolongat a plena potència. També impedeix que la bateria de liti rebi corrents de càrrega excessius. El flux de corrent és unidireccional, impedint la descàrrega de la bateria de liti cap a la bateria d’arrencada.

Funcionalitats avançades de supervisió i control

Aquest BMS incorpora una sortida de desconnexió de càrrega i de desconnexió del corrent de càrrega, permetent tallar les fonts de càrrega o els consumidors DC en cas de tensió de cel·la baixa/alta o temperatura excessiva. Una sortida de pre-alarma pot activar un relé, un LED o un avisador sonor abans de la desconnexió de les bateries. La borneta d’engegada/aturada a distància permet interrompre la càrrega mitjançant el port d’alternador o desactivar completament el sistema. La configuració i la supervisió es realitzen mitjançant l’aplicació VictronConnect i Bluetooth, oferint una lectura immediata dels valors clau per a un diagnòstic ràpid.

Expert review

Pol CONIN

Responsable digital

« Optimized protection for 12V lithium systems with alternator »

The Victron Energy Smart BMS CL 12-100 is a strategic solution for the secure integration of 12.8 V Smart lithium batteries into the electrical systems of vehicles and boats. Its "all-in-one" design simplifies the architecture by consolidating cell protection and alternator protection into a single module. The key benefit lies in its ability to electronically limit the alternator's charging current, a critical feature to prevent overheating and premature degradation of standard alternators, which are not designed for continuous maximum loads. This allows the use of stock alternators without costly modifications, thereby increasing the value for retrofit or first-fit installations where simplicity is a priority.

During installation, it is essential to consider the management of DC loads and charging sources. While the BMS includes disconnect outputs, the use of external devices such as a BatteryProtect or a Cyrix-Li-Charge relay may be necessary for a complete and secure system shutdown, particularly for "phantom" loads that can slowly discharge the battery. Victron's expertise in energy management ensures compatibility with other products in the range, facilitating seamless integration into an existing Victron ecosystem. It is also crucial not to underestimate the importance of configuration via VictronConnect to adjust disconnection and alarm thresholds, thereby ensuring optimal protection against deep discharge and overcharging.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Smart BMS CL 12-100

157,61€

157,61€ ~~193,20€~~

Complete your installation with

Complementary equipment

Victron Energy

Carregador de bateries Blue Smart IP65 12V 25A CEE 7/16

Ref : BPC122531034

191,81€

191,81€ ~~246,00€~~

Victron Energy

Carregador aïllat Orion Tr Smart 12/12-18A (220W) DC-DC

Ref : ORI121222120

153,47€

153,47€ ~~205,20€~~

Victron Energy

Controlador de càrrega SmartSolar MPPT 100/30

Ref : SCC110030210

117,17€

117,17€ ~~164,40€~~

Victron Energy

GX Touch 50

Ref : BPP900455050

202,37€

202,37€ ~~282,00€~~

Victron Energy

Controlador de bateria SmartShunt IP65 500A

Ref : SHU050150050

111,00€

111,00€ ~~128,40€~~

Frequently Asked Questions

Need help? Contact us

What is the Victron Energy Smart BMS CL 12-100?

The Victron Energy Smart BMS CL 12-100 is an all-in-one battery management system (BMS). It is specifically designed for Victron Smart lithium batteries (12.8 V) and 12 V systems equipped with an alternator, particularly in vehicles and boats. Its primary function is to protect and monitor each individual battery cell.

Which type of battery is this BMS designed for?

This BMS is specifically designed for Victron Smart 12.8 V lithium batteries. It provides protection and monitoring for each individual cell within these batteries.

How many Victron Smart 12.8V lithium batteries can be connected to this BMS?

Up to 20 Victron Smart 12.8 V lithium batteries can be connected in a single system managed by this BMS.

What is the maximum energy storage capacity this BMS can handle in a 12V system?

In a 12 V system, the Smart BMS CL 12-100 can handle a maximum energy storage capacity of 84 kWh by connecting up to 20 batteries.

What is the main function of the Alternator/Starter Batt+ port?

The Alternator/Starter Batt+ port provides current limiting and unidirectional current flow from the alternator to the lithium battery. This allows safe connection of any 12 V alternator (and starter battery) to the lithium battery while protecting the alternator from overload and the lithium battery from excessive charging currents.

How does the Smart BMS CL 12-100 protect the alternator?

The Smart BMS CL 12-100 protects the alternator by electronically limiting the input current on the Alternator/Starter Batt+ port to approximately 90% of the fuse rating. For example, with a 100 A fuse, the input current is limited to about 90 A. This limitation prevents the alternator from overheating and failing in case of prolonged operation at full power.

Can current flow from the lithium battery to the starter battery?

No, the current flow is unidirectional. The Smart BMS CL 12-100 prevents current from flowing from the lithium battery to the starter battery, protecting the lithium battery from deep discharge.

What are the charge or discharge cutoff conditions managed by the BMS?

The BMS monitors and protects each individual battery cell. It will disconnect the alternator, charging sources, or DC loads in the event of:

Low or high battery cell voltageExcessive temperature

What is the pre-alarm output used for?

The pre-alarm output can be used to activate a relay, an LED, or an audible alarm. It emits a warning signal before the BMS disconnects the batteries from the system in case of imminent low cell voltage. The alarm triggers with a minimum delay of 30 seconds before the load disconnection output is deactivated.

What is the IP protection rating of this Smart BMS?

The Smart BMS CL 12-100 has an IP65 electronic protection rating. This means it is protected against dust and low-pressure water jets from all directions.

What are the dimensions and weight of the Smart BMS CL 12-100?

The Smart BMS CL 12-100 dimensions are 65 x 120 x 224 mm (height x width x depth). Its weight is 1.6 kg.

How can I monitor and configure the Smart BMS CL 12-100?

Monitoring, initial configuration, and diagnostics of the BMS are performed via Bluetooth using the VictronConnect application. This application allows you to view key parameters in real time.

What is the "Instant Readout" feature in the VictronConnect app?

The 'Instant Readout' is a feature in the VictronConnect app that allows you to read the most important BMS values in real time without needing to connect to the BMS. It simplifies quick diagnostics and provides better range than standard Bluetooth connections.

Is the Smart BMS CL 12-100 compatible with all 12 V alternators?

Yes, it is designed to be safely connected to any 12 V alternator thanks to its dedicated input, which provides current limiting and protection against alternator overload.

With which type of electrical systems is this BMS primarily designed to work?

This BMS is specifically designed for 12 V systems equipped with an alternator, such as those found in vehicles and boats.

Can I use this BMS with lithium batteries from other brands?

No, the Smart BMS CL 12-100 is an all-in-one battery management system specifically designed for Victron Smart 12.8 V lithium batteries. It is not compatible with batteries from other brands.

Which types of DC loads can be controlled by the load disconnect output?

The load disconnect output can be used to control DC loads with a remote on/off input, such as BatteryProtect devices, inverters, or DC-DC converters. It disconnects the load in case of cell undervoltage to prevent deep discharge.

Which types of chargers can be controlled by the load disconnect output?

The load disconnect output can control the remote on/off port of various chargers, including the Phoenix Smart Charger IP43, a Cyrix-Li-Charge relay, or a Cyrix-Li-ct battery combiner. It allows interrupting charging in case of cell overvoltage or excessive temperature.

What is included in the Smart BMS CL 12-100 box?

The Smart BMS CL 12-100 box contains the following items:

The Smart BMS CL 12-100A ground wire with a 10 mm eyelet terminalA 2-pin plug with pre-installed looped wireA 3-pin plug for charge/discharge disconnection and pre-alarmA pre-installed Megafuse 100 A fuseAn ATO fuse holder with two 7.5 A fuses

What are the important safety precautions to take during installation?

During installation, it is imperative to follow national safety regulations. Installation must be carried out only by qualified and trained installers. Before making any changes to connections, the system must be powered off and the absence of dangerous voltages must be verified. It is also crucial not to discharge a new lithium battery before it has been fully charged and to charge it only within the specified limits.