B&G WS320 Interface sans fil uniquement - photo 2

Free shipping over €300 in the EU
Free returns within 30 days

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

B&G

000-14388-001

WS320 Wireless Interface Only

Name: The indispensable bridge between wireless and your NMEA 2000 network
Item: WS320 Wireless Interface Only
Rating: 0

The WS320 wireless interface is the dedicated Bluetooth receiver for the B&G WS320 wireless wind sensor. It ensures the connection between the masthead sensor and the onboard NMEA 2000 network, with a data refresh rate of 5 Hz. This product is sold alone, as a spare part, and does not include the wind sensor.

Included: WS320 wireless interface only.

Retail priceBenefit from the professional rate

218,40€

Tax included. Shipping calculated at checkout.

In stock

Free shipping over €300 in the EU
Free returns within 30 days

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Conformité aux normes Normes et réglementations auxquelles le produit est conforme.	IEC/EN 60945
Bluetooth version Génération de la technologie Bluetooth intégrée à l'appareil.	4.0
Distance de sécurité du compas Distance minimale à laquelle l'appareil ne perturbe pas le compas.	300 cm
Capteurs compatibles Modèle de capteur spécifiquement conçu pour fonctionner avec cette interface.	B&G WS320
Type de connecteur Type de connecteur / terminaison câble.	Micro-C
Data Update Frequency	5
Humidity Test Conditions	66°C, 95% RH, 18h
Included Connection Cable	Micro-C 1.8 m drop cable
Ip Rating	IPX7
Mounting Options	Bulkhead, Mast
Network Load	2
Operating Voltage Range	9-16
Pairing Method	Via a compatible B&G multifunction display
Power Consumption Ma	100
Power Consumption Typical	1.2
Product Diameter	90
Product Height	35
Product Type	Wireless Interface
Weight	0.1
Wireless Connectivity	Bluetooth
Wireless Range Max	30

Detailed description

The B&G WS320 wireless interface is the Bluetooth receiver specifically designed for the WS320 wireless wind transducer. It is the essential component that bridges the gap between the masthead sensor and your boat's NMEA 2000 network, translating wireless signals into usable data for your B&G multifunction displays and autopilots. This product, referenced under SKU 000-14388-001, includes only the interface and does not include the wind transducer.

Connectivity and Performance

Using Bluetooth 4.0 technology, this interface ensures a stable and reliable connection with the WS320 transducer up to a range of 30 meters. It receives wind speed and angle data and transmits it to the NMEA 2000 network at a refresh rate of 5 Hz (5 times per second). This high frequency ensures responsiveness and data fluidity equivalent to the brand's traditional wired systems, such as the WS310, which is crucial for autopilot performance and the accuracy of sailing navigation instruments.

Installation and Power

Integrating the WS320 interface is made as simple as possible. Power (9-16 V DC) and data connection are made directly via the NMEA 2000 network using a standard Micro-C connector. Its power consumption is low, at 1.2 W (less than 100 mA at 12 V DC) for a network load of 2 LEN. The compact and lightweight housing (0.1 kg) is IPX7 waterproof certified, allowing installation in the most demanding marine environments, protected from the elements. Configuration and pairing with the wind sensor are done from a compatible B&G multifunction display.

Product Positioning: Interface Only

This product is the WS320 wireless interface sold separately. It is primarily intended for replacing a damaged or lost existing unit, or for custom installations. To create a complete and functional wind measurement system, this interface must be paired with the WS320 wireless wind transducer, which is sold separately or in the complete WS320 pack. The complete WS320 system represents a modern alternative to wired sensors, eliminating the hassle of running cables through the mast without any compromise on accuracy.

Documentation

Type	Nom
	EN - Sensor Configuration Guide - Wireless Only WS320 - Ref c0c5fb02.pdf
	EN - Mounting template
	EN - Installation Guide
	EN - Declaration of CE Conformity

Expert opinion

« The indispensable bridge between wireless and your NMEA 2000 network »

The WS320 interface is the essential component that bridges the gap between the wireless technology of the B&G wind sensor and the robustness of the wired NMEA 2000 network. Its role is to receive wind data via a low-power Bluetooth connection and translate it into standard NMEA 2000 PGNs, while powering the sensor. This module eliminates the need for a mast cable, a frequent source of failures, without sacrificing the reliability of data integration. Its standard Micro-C connector and IPX7 waterproof housing ensure a simple and durable installation, integrating perfectly into the network architecture of any B&G-equipped sailboat.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

WS320 Wireless Interface Only

218,40€

Frequently Asked Questions

Need help? Contact us

What exactly is the WS320 wireless interface?

The WS320 wireless interface is a Bluetooth receiver. Its role is to receive data from the B&G WS320 wireless wind sensor (sold separately) and transmit it to your boat's NMEA 2000 network for display on your screens.

Is the wind sensor that mounts at the masthead included with this product?

No, this product (SKU 000-14388-001) only contains the wireless interface (the receiver). The WS320 wind sensor must be purchased separately or as part of a complete pack.

What wind sensor is this interface compatible with?

This interface is designed exclusively to work with the B&G WS320 wireless wind sensor. It is not compatible with other models, including wired models like the WS310.

How is the WS320 interface powered?

The interface is powered directly by your boat's NMEA 2000 network. It operates with a voltage of 9 to 16 V DC supplied by the network bus, without requiring a separate power cable.

What is the wireless connection range between the interface and the sensor?

The Bluetooth connection between the interface and the WS320 wind sensor has a range of up to 30 meters (98 feet), which is sufficient for most sailboats.

What type of network does this interface connect to?

The WS320 interface connects to your boat's NMEA 2000 network via a standard Micro-C connector, ensuring broad compatibility with modern navigation equipment.

How often is the wind data updated?

Wind data (apparent speed and angle) is transmitted to the NMEA 2000 network at a refresh rate of 5 Hz, or five times per second, for maximum responsiveness.

What is the power consumption of this interface?

The power consumption of the WS320 interface is very low, amounting to 1.2 W, which corresponds to less than 100 mA at a voltage of 12 V DC.

What is the network load equivalent (LEN) of this product?

The WS320 interface has a network load equivalent (LEN) of 2. This value should be considered when calculating the total load of your NMEA 2000 network.

Quel est l'indice d'étanchéité de l'interface WS320 ?

The interface benefits from an IPX7 waterproof rating, meaning it is protected against temporary immersion in water (up to 1 meter deep for 30 minutes).

Quel type de connecteur est utilisé pour le raccordement au réseau ?

The interface uses a standard Micro-C connector to plug directly into a T-connector on your NMEA 2000 backbone.

Pourquoi acheter uniquement l'interface sans le capteur de vent ?

This product is primarily intended for replacing an existing interface that is damaged or lost, or for a custom installation where components are acquired separately.

Cette interface est-elle compatible avec un ancien réseau SimNet ?

The interface uses NMEA 2000 (Micro-C) connectivity. To connect it to an older SimNet network, a SimNet to Micro-C adapter cable (sold separately) is required.

Où est-il recommandé d'installer le boîtier de l'interface ?

It is recommended to install the interface in a dry and sheltered location, while ensuring it remains within the 30-meter range of the masthead sensor. The location should allow for easy connection to the NMEA 2000 backbone.