Bus Bar common 100 A manual cover

The main function of this bus bar is to provide a reliable and water-resistant electrical distribution solution for demanding marine environments. It consolidates wiring and optimizes space on board thanks to its single-sided wire entry design, ideal for positive distribution or collection of DC negative conductors or AC grounding.

This bus bar is rated for a maximum continuous current of 100 A, whether in AC (alternating current) or DC (direct current).

The maximum operating voltage of this busbar is 300 V AC (alternating current) and 48 V DC (direct current).

The bus bar is manufactured with tinned copper busbars (C11000), ensuring excellent electrical conductivity and increased resistance to corrosion in the marine environment.

This bus bar has an IP66 waterproof rating when mounted and the gasket is in place. This means it is protected against powerful water jets and humid environments, making it suitable for installations on boats or vehicles.

This bus bar is suitable for marine environments due to several features:

Its water-resistant design (IP66) protects against powerful water jets and humidity.Its tinned copper busbars (C11000) provide excellent conductivity and corrosion resistance.It is designed to consolidate wiring and optimize space, an advantage in the confined areas of boats.

Yes, this bus bar complies with ABYC E-11.4.23, E-11.4.27, and E-11.9.1.2 requirements thanks to its yellow knurled screw manual cover. It is also CE marked and IP66 certified.

The "manual cover" means this model (2356100-BSS) is fitted with yellow knurled screws that can be operated by hand to access the connections without requiring a tool. This feature is essential for compliance with ABYC requirements regarding quick and safe access in an emergency.

The overall dimensions of this bus bar are as follows:

Length: 137.3 mm (5.41 inches)Width: 50.5 mm (1.99 inches)Height: 86.1 mm (3.39 inches)

Yes, this bus bar is supplied with four writable circuit labels to facilitate connection identification.

This bus bar accepts an input wire size between 8 AWG and 4 AWG.

This bus bar accepts four load wires with sizes ranging from 16 AWG to 10 AWG.

The bus bar accepts standard ring or fork terminals, allowing simple wiring with standard tools. The manual cover does not require tools for access.

The bus bar is installed using mounting holes that accept 1/4" (6 mm) screws.

If fewer than four loads are connected, the bus bar includes blanking plugs to maintain its water resistance rating.

Yes, this bus bar can interlock with other 100A Water-Resistant common bus bars (such as model 2356 or 2356100) and ST-Blade Water-Resistant fuse blocks (models 5056 or 5056100) from Blue Sea Systems.

Yes, this bus bar is suitable for positive distribution or for collecting DC negative conductors or AC grounding conductors.

Yes, this busbar is designed to work with AC systems (alternating current) up to 300 V and DC systems (direct current) up to 48 V, with a continuous current rating of 100 A for both.

The bus bar uses four #8-32 screws with captive lock washers for the output terminals (load) and a #10-32 stud for the input terminal.

Yes, this bus bar is suitable for collecting AC grounding conductors.