[CYCLOPS] Smartlink² 5t capteur d'effort — vue 1

[CYCLOPS] Smartlink² 5t capteur d'effort — vue 2

[CYCLOPS] Smartlink² 5t capteur d'effort — vue 3

[CYCLOPS] Smartlink² 5t capteur d'effort — vue 4

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Cyclops Marine

SR12

Smartlink 2 5t load sensor

Le CYCLOPS Smartlink² 5t est un capteur d'effort sans fil de 5 tonnes, conçu en titane avec une étanchéité IP67 pour une précision de ±1%. Il transmet les données via Bluetooth à l'application Smartfittings ou s'intègre aux systèmes NMEA2000 via une passerelle Cyclops.

Retail priceBenefit from the professional rate

2.846,58€

2.846,58€ ~~2.996,40€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product width	66
Product height	83
Product depth	22
IP rating	IP67
Bus compatibility	Bluetooth
Mounting type	En ligne (fixation textile)
Linearity	±1%
Sensor output type	Sans fil (Bluetooth)
Sensor connection type	Sans fil (Bluetooth)
Sensor type	Capteur d'effort sans fil
Sensor compatibility	Application mobile (iOS/Android), NMEA2000, NMEA0183, NKE, UDP, MQTT, Sailmon, Vakaros Atlas 2
Data output	Données de charge en temps réel, données de charge enregistrées
Update rate	1 Hz (réglable jusqu'à 10 Hz)
Operating temperature range	-10°C à +40°C
Working Load Limit	5000 kg
Breaking Load	7500 kg
Max Soft Attachment Diameter	10.7 mm
Measurement Accuracy	±1%
Wireless Protocol	Bluetooth
Battery life	2000 h (utilisation standard), 8000 h (mode économie d'énergie)
Charging Time	1 heure
Product dimensions	83 x 66 x 22 mm
Material	Titane (Ti6Al4V) et Acétal
Domaine d'application	Optimisation des performances de voile, sécurité du gréement
Battery capacity	0.925
Battery type	Lithium Polymère
Charging method	Induction sans fil
Ease Of Installation	Facile
Manufacturing Origin	Royaume-Uni
Type de mesure	Effort dynamique
Safety Feature	Surveillance des charges en temps réel pour prévenir la rupture de gréement
Ultra Low Power Battery Life	2
User Interface	Application mobile (iOS/Android), Électronique de bord

Detailed description

The CYCLOPS Smartlink² 5t load sensor (SR12) is a wireless load cell designed for marine applications, capable of measuring dynamic loads on lines and rigging components. This sensor offers a maximum load capacity of 5 000 kg (5 tonnes), ensuring precise tension monitoring aboard.

Accuracy and robustness

The Smartlink² 5t guarantees an accuracy of ±1% of its Maximum Working Load (MWL) across a temperature range of -10°C to +40°C. Its body is made of titanium (Ti6Al4V) and its housing from acetal, providing resistance to harsh marine environments. It is rated IP67 for water ingress protection, ensuring durability even during prolonged immersion. Weighing 210 g and measuring 83 x 66 x 22 mm, it integrates discreetly into your rigging system.

Connectivity and battery life

This sensor wirelessly transmits data via Bluetooth to the Cyclops Smartfittings Manager app, available on iOS and Android, allowing real-time load monitoring and data logging for later analysis. For full integration with the boat’s electronic systems, it can connect via a dedicated Cyclops gateway, compatible with NMEA2000, NMEA0183, NKE, UDP, and MQTT interfaces. The Smartlink² 5t is powered by a 0.925 Wh lithium polymer battery, offering up to 2 000 hours of operation in standard mode, 8 000 hours in power-saving mode, and 2 years in standby mode. Wireless inductive charging takes approximately 1 hour.

Optimization and safety

The Smartlink² 5t enables precise sail trimming and performance optimization by providing continuous, real-time load data. It also enhances safety by allowing early detection of overloads, helping to prevent rigging failures. The mobile app allows adjustment of data transmission frequency up to 10 Hz and management of sensor activation/deactivation.

Documentation

Type	Nom
	marine_brochure2024_pdf.pdf
	Copy of App Guide Issue 9 EN.pdf
	Copy of smartlink2 guide Issue 3 EN.pdf
	Copy of App Guide Issue 9 FRA.pdf

Expert opinion

« Technical analysis of the CYCLOPS Smartlink² 5t: Load measurement and system integration »

The CYCLOPS Smartlink² 5t load sensor is a technical solution for measuring dynamic loads on soft rigging. Its titanium construction and IP67 waterproof rating make it suitable for demanding marine environments where data reliability is critical. The sensor is installed inline with sheets or halyards, enabling quick installation without major structural modifications. It is particularly relevant for sailors looking to optimize real-time sail trim or monitor rigging safety under load.

Integrating the Smartlink² 5t into an onboard electronic system is ideally done via the Cyclops gateway, which centralizes data and distributes it via NMEA2000, NMEA0183, NKE, or UDP. This integration capability is a key advantage for boats equipped with modern navigation systems. The battery’s autonomy, up to 8,000 hours in extended mode, and inductive charging simplify power management. This sensor serves as a decision-support tool for racing crews and a safety measure for cruising, enabling post-navigation analysis of performance and rigging loads.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Smartlink 2 5t load sensor

2.846,58€

2.846,58€ ~~2.996,40€~~

Frequently Asked Questions

Need help? Contact us

What is the maximum load capacity of the Smartlink² 5t sensor?

The CYCLOPS Smartlink² 5t load cell is designed to measure dynamic loads and has a maximum load capacity of 5,000 kg (5 tonnes).

Which materials is the Smartlink² 5t sensor made from?

The Smartlink² 5t sensor body is made of titanium (Ti6Al4V) and its housing is in acetal, providing resistance and durability suitable for demanding marine environments.

How does the Smartlink² 5t sensor transmit load data?

The Smartlink² 5t sensor transmits data wirelessly via Bluetooth to the Cyclops Smartfittings Manager app, available on iOS and Android. For full integration with the boat’s electronic systems, it can connect via a dedicated Cyclops gateway.

What is the battery life of the Smartlink² 5t sensor and how is it recharged?

The Smartlink² 5t is powered by a 0.925 Wh Lithium Polymer battery. Its battery life can reach:

2,000 hours in standard use (1Hz frequency)8,000 hours in power-saving mode (0.25Hz frequency)2 years in powered-off modeWireless inductive charging takes approximately 1 hour.

Is the Smartlink² 5t sensor water- and dust-resistant?

Yes, the Smartlink² 5t sensor has an IP67 waterproof rating, ensuring durability and protection against prolonged immersion and dust in demanding marine environments.

How to properly install the Smartlink² 5t sensor?

The Smartlink² 5t is designed to be installed inline with flexible lines (ropes, strops). It is important not to load it in a bridle configuration, as this would result in inaccurate load measurements. Additionally, using shackles or metal pins directly on the sensor is not recommended, as this could mark the titanium body and cause permanent damage.

Which boat electronic systems is the Smartlink² 5t compatible with?

The Smartlink² 5t can be integrated into your boat's electronic systems via a dedicated Cyclops gateway. This gateway is compatible with NMEA2000, NMEA0183, NKE, UDP, and MQTT interfaces, allowing real-time battery data to be displayed on your boat's screens.

What is the accuracy of the load measurements for the Smartlink² 5t?

The Smartlink² 5t sensor provides an accuracy of ±1% of its Maximum Working Load (MWL). This accuracy is guaranteed within a temperature range of -10°C to +40°C and is achieved using the slings supplied or recommended by Cyclops Marine.

What happens in case of overload on the Smartlink² 5t sensor?

It is imperative not to exceed the maximum working load (MWL) of the Smartlink² 5t. An overload or shock load (for example, a broken strop) reaching 150% of the MWL will cause permanent damage to the sensor's internal instrumentation and require recalibration. This may also void the warranty.