TM70D600 — Sonde bi-fréquence 50/200 kHz 600 W, montage tableau arrière, étrier inox, profondeur et température

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 7%

Echonautics

EC-TM70D600

TM70D600 — 50/200 kHz dual-frequency depth sounder, 600 W, transom mount, stainless steel bracket, depth and temperature

Name: TM70D600 — 50/200 kHz dual-frequency depth sounder, 600 W, transom mount, stainless steel bracket, depth and temperature
Brand: Echonautics
SKU: EC-TM70D600
Price: 222.19 EUR
Availability: InStock

La sonde ECHONAUTICS TM70D600 est une solution bi-fréquence 50/200 kHz de 600 W, conçue pour la mesure de profondeur et de température. Son montage sur tableau arrière avec étrier inox permet une installation polyvalente. Elle offre une détection fiable jusqu'à 366 mètres à 50 kHz.

Livrée avec le corps de la sonde, son câble de 9 mètres, les bras de l'étrier, les boulons pivotants, les rondelles et les écrous.

Retail priceBenefit from the professional rate

222,19€

222,19€ ~~240,00€~~

Tax included. Shipping calculated at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	CW
Fishfinder frequencies	50/200 kHz
Peak power	600.0
Max depth reading	366.0
Transducer material	Inox
Sonar connector type	Connecteur femelle 8 broches
Cable length	9.0
Mounting type	Tableau arrière
Beam coverage angle	42°/11°
Beam Width High Frequency 3db	11
Beam Width Low Frequency 3db	42
Bracket Material	Inox
Compatible Transducer Models	CB101D600,BT70D600,ST70D600,TM70D600
Fishing type	Mer
Galvanic Corrosion Prevention Note	L'étrier en acier inoxydable doit être isolé électriquement d'une coque métallique pour éviter la corrosion galvanique. Placer des rondelles isolantes non métalliques entre l'étrier et un tableau arrière métallique.
Included Mounting Hardware	corps du transducteur, câble, bras d'étrier, boulons de pivot, rondelles, écrous
Installation Depth Caution	Ne pas positionner le transducteur plus profondément que nécessaire. Une profondeur excessive augmente la traînée, les éclaboussures et le bruit de l'eau, et réduit la vitesse du bateau.
Max Depth Rating High Frequency	213
Max Depth Rating Low Frequency	366
Post Installation Test	Mettre l'instrument sous tension, moteur éteint. Vérifier une lecture de profondeur en eau calme.

Detailed description

Designed for precise underwater data acquisition, the ECHONAUTICS TM70D600 transducer is a 600 W dual-frequency depth sounder for depth and temperature detection. This CW model is optimized for transom installation, providing a versatile solution for recreational boaters and anglers exploring varying depths.

Acoustic performance and range

The TM70D600 operates on two distinct frequencies: 50 kHz and 200 kHz. This dual-frequency setup allows detection to be adapted to encountered conditions and depths. At 50 kHz, it reaches a maximum depth of 366 m (1,200 ft) with a beam width of 42° at -3 dB. For higher resolution and shallower depths, the 200 kHz frequency offers a maximum range of 213 m (700 ft) with a beam width of 11° at -3 dB. The 600 W power ensures reliable sound wave emission.

Installation and connectivity

The ECHONAUTICS TM70D600 transducer is supplied with a robust stainless steel bracket designed for transom mounting. Its integrated 9 m (29.5 ft) cable terminates in a standard 8-pin female connector, ensuring direct connection to compatible sonar equipment. When installing on a metal hull, it is important to electrically isolate the stainless steel bracket to prevent galvanic corrosion, using non-metallic insulating washers.

Documentation

Type	Nom
	EN - Fiche technique CW 50-200 kHz 600 W - TM70D600
	EN - Manuel d'installation TM70 TM87 - TM70D600
	EN - Schéma de câblage CW 50-200 kHz 600 W - TM70D600
	EN - Guide d'intégration des transducteurs - TM70D600

Payment and security

Your payment information and data are processed securely.

TM70D600 — 50/200 kHz dual-frequency depth sounder, 600 W, transom mount, stainless steel bracket, depth and temperature

222,19€

222,19€ ~~240,00€~~

Frequently Asked Questions

Need help? Contact us

What are the operating frequencies of the ECHONAUTICS TM70D600 transducer?

The ECHONAUTICS TM70D600 transducer is a dual-frequency unit operating on two distinct frequencies: 50 kHz and 200 kHz.

What is the power output of this transducer?

The ECHONAUTICS TM70D600 transducer has a power rating of 600 W.

What data can the TM70D600 transducer measure?

The TM70D600 transducer is designed to detect depth and water temperature.

What is the maximum depth the transducer can detect?

Maximum detection depth depends on the frequency used:

At 50 kHz, it can reach a maximum depth of 366 meters (1,200 ft). At 200 kHz, it can reach a maximum depth of 213 meters (700 ft).

What is the beam width of the ECHONAUTICS TM70D600 transducer?

The beam width of the transducer varies by frequency:

At 50 kHz, the beam width is 42° at -3 dB. At 200 kHz, the beam width is 11° at -3 dB.

What type of sonar is the TM70D600 transducer?

The TM70D600 transducer is a CW (Continuous Wave) sonar transducer.

What is the length of the transducer cable?

The ECHONAUTICS TM70D600 transducer is supplied with an integrated 9-meter (29.5 ft) cable.

What components are included in the transducer package?

The transducer package includes the transducer body, cable, bracket arms, pivot bolts, washers, and nuts.

What is the beam diameter at different depths?

Beam diameter varies with depth and frequency:

At 10 meters depth: 8 m (50 kHz) and 2 m (200 kHz). At 50 meters depth: 38 m (50 kHz) and 10 m (200 kHz). At 100 meters depth: 77 m (50 kHz) and 19 m (200 kHz). At 150 meters depth: 115 m (50 kHz) and 29 m (200 kHz). At 300 meters depth: 230 m (50 kHz) and 58 m (200 kHz).

What mounting type is recommended for this transducer?

The ECHONAUTICS TM70D600 transducer is designed for transom mounting.

How to install the TM70D600 transducer on a metal hull?

When installing on a metal hull, it is mandatory to electrically isolate the stainless-steel bracket from the hull to prevent galvanic corrosion. To do this, use non-metallic insulating washers between the bracket and the metal transom.

Is it important not to position the transducer too deep in the water?

Yes, it is recommended not to position the transducer deeper in the water than necessary. Excessive depth increases drag, spray, and water noise, which can also reduce boat speed.

How to check proper operation of the transducer after installation?

After installation, you must test the transducer by powering on the sonar instrument with the boat engine off. Verify that a depth reading displays in calm water.

What is the mounting bracket material?

The ECHONAUTICS TM70D600 transducer comes with a robust stainless-steel mounting bracket.

Is the transducer supplied with all necessary mounting hardware?

Yes, the transducer is supplied with the stainless-steel bracket, bracket arms, pivot bolts, washers, and nuts required for installation on the transom.

What precautions should be taken when selecting the transducer for the sonar system?

It is crucial to always match the transducer’s rated power when selecting the transducer type in your sonar system’s menu. Selecting a different power could damage both the transducer and the sonar equipment.

Where can I find the transducer specifications for configuring my sonar system?

The transducer type, rated power, and frequency range are specified on the Echonautics transducer’s product label.

Is the TM70D600 transducer compatible with CHIRP sonar systems?

The ECHONAUTICS TM70D600 transducer is a CW (Continuous Wave) sonar transducer and operates on fixed frequencies of 50/200 kHz. CHIRP systems use a different frequency range (Low/Med/High CHIRP) and require specific transducers. It is important to verify compatibility of your sonar equipment with CW 50/200 kHz transducers.