Y-communication cable Spirit/Navy 0.3 m, 1 male and 2 female connectors

The ePropulsion Spirit/Navy 0.3 m Y-shaped communication cable is an essential accessory designed to optimize the connectivity of the brand's electric propulsion systems. It acts as a one-to-two splitter, allowing simultaneous connection of the control unit and the E-Series batteries to the communication port of an ePropulsion motor via a single line.

This Y-shaped communication cable has a length of 0.3 meters.

The cable is fitted with one male connector and two female connectors.

Its primary function is to centralize communication between several essential devices, such as the control unit and E-Series batteries, and the ePropulsion motor. It allows using a single communication port on the motor for both connections.

Yes, this cable is an accessory from the ePropulsion brand, designed specifically for their electric propulsion systems.

The Y-shaped design simplifies installations by reducing the number of direct cables to the motor. This makes it easier to connect multiple essential components simultaneously, such as the control unit and batteries, centralizing communication.

Yes, its 0.3-metre length makes it compact and easy to handle for short-distance connections. It is also easy to store when not in use.

Ce câble est compatible avec une vaste gamme de moteurs ePropulsion, incluant :

Spirit 1.0 PlusSpirit 1.0 EvoSpirit 1.0 Evo RNavy 3.0 EvoNavy 6.0 EvoPod Drive 1.0Pod Drive 3.0Pod Drive 6.0 Evo

This cable ensures integration with ePropulsion batteries from the E series, specifically the E60 and E163 models.

Yes, it is compatible with the following ePropulsion control units:

Evo Side MountEvo Dual Remote

It is compatible with Spirit 1.0 Plus, 1.0 Evo, 1.0 Evo R models, as well as Navy 3.0 Evo and 6.0 Evo. For older models not listed, compatibility is not guaranteed, and it is recommended to check your motor's specifications.

The Y-cable is particularly useful for centralizing connections to a single communication port on the motor. If your motor has multiple ports and you are only connecting one battery and one control unit, it may not be strictly necessary, but it provides a clean and simplified integration solution.

This cable is specifically designed for communication between the motor, E-Series batteries (E60, E163) and Evo Side Mount/Dual Remote controls. Its compatibility with other ePropulsion accessories will depend on their specific communication port requirements.

Installation is straightforward:

The male connector of the cable plugs into the designated communication port on your ePropulsion motor. The two female connectors then allow connection of the control unit (Evo Side Mount or Evo Dual Remote) and the battery from the E series (E60 or E163).

There is no strict connection order, but a common approach is to:

Connect the Y-cable to the motor’s communication port. Then plug the battery and the control unit into the two female connectors of the Y-cable. Ensure all connections are fully inserted and secured.

The Y-shaped communication cable is designed to connect a control unit and a battery from the E series to the motor’s communication port. To connect multiple batteries, additional accessories or configurations may be required depending on the ePropulsion system and motor model. This cable alone does not allow the connection of two batteries simultaneously.

ePropulsion systems are designed for a marine environment. While the description does not explicitly mention an IP rating for this cable, ePropulsion products are generally robust for nautical use. It is recommended to ensure all connections are securely fastened and protected from water spray to guarantee the system's longevity and reliability.

Yes, with a length of 0.3 meters, it is short and designed for close connections. Its flexibility allows for easy installation even in relatively confined spaces, making cable routing easier.