ADLER EF3 fuse 200 Vdc / 200 A – MG5001325

This ADLER EF3 fuse from MG Energy Systems has a rated current of 200 A.

The nominal voltage of this fuse is 200 Vdc (Volts direct current).

The declared interrupting rating of this fuse is 50 kA at 200 Vdc. This indicates its maximum capacity to interrupt a fault current without being destroyed.

This fuse has a compact EF3 format of 36 × 22 mm. It is designed for M8 bolt mounting.

Yes, this fuse is designed to UL 248-20, ISO 8820-8, GB/T 31465 and IEC 60269-7 standards. It is also a UL-recognized component (file E506668), manufactured under the IATF 16949 quality system, and compliant with RoHS and REACH.

The main features of this ADLER EF3 fuse include:

A precise rating of 200 A at 200 Vdc. A breaking capacity of 50 kA at 200 Vdc. A compact EF3 format of 36 × 22 mm with M8 bolt mounting. Reliable ability to interrupt DC fault currents. High cycling performance and low watt losses.

Yes, this fuse meets the vibration test C requirements of section 8.6.2.3 of UL248-20, making it suitable for electric vehicle applications and other vibration-prone environments.

The declared shipping weight of this fuse is 0.07 kg.

The customs code (HS code) for this fuse is 85361090.

No, this product is not classified as dangerous goods for transport.

This fuse is compatible with MG Energy DC protection panels, and the dealer portal indicates it can be installed in the Master LV and Distributor LV.

It is imperative to replace an existing fuse only with a 200 A fuse specifically validated for your system's architecture. The rated current must never be selected based solely on the battery's power rating.

The choice of fuse rating and coordination of protections must be carried out by a qualified professional. It is essential to check the voltage, currents, protections, cooling, and interfaces of the complete system before installation.

This fuse is designed to operate satisfactorily within normal temperature conditions ranging from -5°C to 40°C.

The air must be clean and its relative humidity must not exceed 50% at a maximum temperature of 40°C. Higher relative humidities are allowed at lower temperatures, for example 90% at 20°C. Moderate condensation may occasionally occur.

Yes, the fuse rating selection, protection coordination, and installation must be performed by a qualified professional to ensure system safety and proper operation.

The recommended torque for ADLER bolts M8 is 12 ± 1 N·m. It is advised to confirm this torque based on your specific MG Energy system assembly.

Before installing or replacing the fuse, it is imperative to disconnect all DC sources for safety reasons. Also check the voltage, currents, and protections of the entire system.

For a complete installation, you will need to purchase separately:

A fuse holder. A distribution block. The appropriate cables. The terminals and specific fasteners for your installation. A selectivity study and validation of the fault current.

Yes, the installation site altitude for this fuse must not exceed 2000 meters above sea level to ensure optimal operation.