Garmin OnBoard™ System - Safety and Remote Monitoring

The Garmin OnBoard™ System is a marine safety device designed to be a key element of safety at sea. It belongs to Garmin's range of safety beacons and MOB (Man OverBoard) buttons, aiming to improve response time and efficiency in rescue operations by providing rapid triggering or signaling capability in the event of a man overboard.

The Garmin OnBoard™ System is designed for integration with Garmin’s marine electronics ecosystem. Its designation as an "OnBoard™ System" suggests it is intended to complement other Garmin equipment by providing essential onboard safety functionality rather than functioning as a fully standalone device.

This product contains a button cell or coin cell battery, which presents an ingestion hazard. It is crucial to keep new and used batteries out of reach of children. Ingestion of a button cell or coin cell battery can cause severe or fatal internal chemical burns within as little as 2 hours. If ingestion or insertion into any part of the body is suspected, seek immediate medical attention.

The Garmin OnBoard™ System, like all Garmin non-aeronautical products, is warranted against defects in materials or workmanship for one year from the date of purchase.

Garmin's limited warranty covers defects in materials or workmanship under normal use. During the warranty period, Garmin will repair or replace, at its sole discretion, any defective component free of charge to the customer, covering parts and labor.

Consumable parts, such as batteries, are generally not covered by Garmin’s limited warranty. An exception applies if damage to the product occurred directly due to a defect in materials or manufacturing of the battery itself.

The Garmin OnBoard™ system is a marine safety device designed to be a key safety element aboard. It is part of Garmin's range of safety beacons and MOB (Man OverBoard) buttons, aimed at improving emergency response at sea.

The primary role of the Garmin OnBoard™ system is to provide rapid triggering or signaling capability in the event of a man overboard. It is designed to improve the efficiency of sea rescue operations, similar to individual MOB beacons or PLBs (Personal Locator Beacons).

The Garmin OnBoard™ system falls under the category of safety beacon devices and MOB (Man OverBoard) buttons. It is designed to provide a core safety function similar to individual MOB beacons or PLBs (Personal Locator Beacons), but it is presented as an integrated on-board system rather than a standalone personal beacon.

Yes, the Garmin OnBoard™ system’s positioning suggests integration with Garmin’s marine electronics ecosystem. It is designed to complement other Garmin equipment by providing rapid triggering or signaling capability.

Yes, this product contains a coin cell or button cell battery. Special attention must be paid to this battery due to the risk of ingestion.

The product contains a button cell or coin cell battery, which presents a risk of ingestion. Ingestion can lead to severe internal chemical burns or even death within as little as 2 hours. It is imperative to keep new and used batteries out of reach of children. If ingestion or insertion of the battery into a body part is suspected, seek immediate medical attention.

No, this product contains no user-serviceable parts. Repairs must be performed exclusively by an authorized Garmin service center. Unauthorized repairs or modifications may cause permanent damage to the equipment and void your warranty.

Yes, the device is a mobile transmitter and receiver using an internal antenna. To comply with RF exposure requirements, the device must be installed and used with the separation distance described in the printed manual. It must not be co-located or used in conjunction with another transmitter or antenna.

Non-aeronautical products are warranted against defects in materials or workmanship for one year from the date of purchase.

The limited warranty does not apply to consumable parts such as batteries, unless damage to the product occurred due to a material or manufacturing defect.

The limited warranty does not apply in the following cases:

Cosmetic damage (scratches, nicks, dents).Damage caused by an accident, misuse, water, flooding, fire, or other natural disasters or external causes.Damage caused by service performed by a person not authorized by Garmin.Damage to a product that has been modified or altered without Garmin’s written authorization.Damage to a product connected to power and/or data cables not supplied by Garmin, or to non-UL-certified power adapters and cables not labeled as a Limited Power Source (LPS).

Yes, Garmin states that this product is compliant with Directive 2014/53/EU as well as relevant UK legal requirements.

Yes, this device is compliant with FCC Part 15 rules. Its operation is subject to two conditions: it must not cause harmful interference and must accept any interference received, including interference that may result in undesired operation. It has been tested and found to comply with the limits for a Class B digital device.

This device is designed to comply with FCC Part 15 rules, meaning it should not cause harmful interference. However, it must accept any received interference, including that which could cause unintended operation. If the equipment causes harmful interference, corrective measures are suggested in the manual, such as reorienting the antenna or increasing separation from the receiver.